Xi-1123A/106F
12-InchThree-Way, Full-Range 100° x 60° Sound Reinforcement System
Key Features:
•Compact/High-Level,Three-Way Design
•VBS Capable
•DL12ST 12” Slot-Loaded Low-Frequency Driver
•DL10X 10” Horn-Loaded Mid-Bass Driver
•ND6-16 3” Diaphragm HF Compression Driver
•100° x 60° High-Frequency Coverage
•Triamp or Biamp Operation
•Fully Rotatable HF and MB Sections for Vertical or Horizontal Suspension
•Ring-Mode Decoupling / RMDTM
•Built-In L-Track Rigging
•Available in Black or White
General Description:
The Electro-Voice® Xi-1123A/106F is a triamp-ready, threeway system in a unique two-element-line-array configuration designed for use in reverberant spaces. The orientation of LF section and the mid-bass horn create a two-element line array that extends vertical pattern control to below 350 Hz. Using VBS (Vertical Beam Shaping) technology this benefit can be increased by another 20° to 30° of pattern control above 300 Hz. VBS uses filters to overlap the LF section bandpass with mid-bass bandpass. By carefully phase matching the acoustic response in the overlap region, the vertical pattern control is dramatically improved as seen in the graphs on Page 2. Frequency response onaxis is unaffected, while gain before feedback is increased by 10 to 15 dB for microphones located under the loudspeaker. The DL10X 10-inch mid-bass driver features RMD™ and is coupled to a rotatable 100° x 60° vertical horn. The high-frequency system uses an ND6-16 largeformat compression driver with a rotatable 100° x 60° horn. It is mounted within the upper woofer enclosure to provide a compact vertical size. The Xi-1123A/106 is ideally suited for high-level, high-fidelity applications. The system is particularly suited where extended vertical polar control is necessary. Its low-frequency capability allows the system to be used in many applications without a subwoofer. For applications requiring very high low-frequency sound pressure levels as well as very accurate vocal reproduction, the Xi-1123A/106 may be coupled with the Electro-Voice Xi1191A or Xi-2181A.
Technical Specifications:
Freq. Response1 (-3 dB): |
75 Hz - 17 kHz |
Freq. Range1 (-10 dB): |
53 Hz - 19 kHz |
Max Calculated SPL2: |
138 dB |
Coverage: |
100° x 60° (Rotatable) |
|
|
LF Power Handling: |
300W Continuous, 1200W Peak |
|
|
MB Power Handling: |
300W Continuous, 1200W Peak |
|
|
HF Power Handling: |
75W Continuous, 300W Peak |
|
|
LF Sensitivity: |
96 dB, 1W/1m |
|
|
MB Sensitivity: |
107 dB, 1W/1m |
|
|
HF Sensitivity: |
112 dB, 1W/1m |
|
|
LF Impedance: |
8 ohms (Nominal) |
|
|
MB Impedance: |
8 ohms (Nominal) |
|
|
HF Impedance: |
16 ohms (Nominal) |
|
|
LF Transducer: |
DL12ST 12" (305mm) Driver, 8 ohms |
|
|
MB Transducer: |
DL10X 10" (254mm) Driver, 8 ohms |
|
|
HF Transducer: |
ND6-16 3" (76mm) Diaphragm Comp. |
|
Driver, 16 ohms |
|
|
Crossover Frequency3: |
Use Recommended Parameters |
Connectors: |
Two Neutrik Speakon® NL8MPR |
Enclosure Material: |
13-ply Birch plywood |
|
|
Grille: |
16 GA steel |
|
|
Dim (H x W x D): |
801 x 458 x 473 mm |
|
(31.5" x 18.0" x 18.6") |
|
|
Net Weight: |
52.2 kg (115 lbs) |
|
|
Shipping Weight: |
54.5 kg (120 lbs) |
|
|
1Full Space measurement with a Dx38 Controller
2Max Calculated SPL of MB Section
3Download at www.electrovoice.com
Xi-1123A/106F Full Range Loudspeaker (3-Way) |
|
Frequency Response (Full & Half Space): |
Impedance: |
Beamwidth (3-Way): |
Horizontal Off Axis Frequency Response: |
Beamwidth with VBS (Dipole):
Vertical Off Axis Frequency Response (Up):
Directivity (3-Way):
Vertical Off Axis Frequency Response (Down):
Directivity with VBS (Dipole):