PX2122
12” Two-Way
Dual Manifolded HF 45° x 30°
Fullrange Loudspeaker System
Key Features:
•Dual ND2 2" Voice Coil, 1" Exit Neodymium Compression Drivers
•Dual DVX3121 12” LF Transducers with Forced Air Cooling
•Long-Throw 45° x 30° Rotatable Coverage Pattern
•1000W Continuous (4000W Peak) Power Handling
•Biamp Operation
•Very High Sensitivity, 138 dB Maximum SPL
•Integral Rigging Points for Eyebolts or Optional Rigging Kit
•Designed to be Arrayed
General Description:
The Electro-Voice® PX2122 is a high efficiency 2-way loudspeaker system that is part of the Electro-Voice® Phoenix Series and is intended for high output sound reinforcement in fixed-installation and portable sound applications. The PX2122 is configured for biamp operation, and to be used with the PX2181 for extended LF in a 3-way configuration for highest SPL capability.
The PX2122 uses dual DVX3121 woofers, a high efficiency 12-inch woofer with forced air cooling, in a vented enclosure. Dual ND2-16 compression drivers are precisely summed in a manifold for increased power handling, maximum SPL, and lower distortion. The very low distortion 45° x 30° horn provides tight coverage, long throw, and is rotatable. Designed to be used as array elements, up to three PX2122’s can be arrayed together for 135° of horizontal coverage. The enclosure is constructed of 18-mm, 13-ply plywood using tongue and groove joints and EVCoat for long term durability.
The PX2122 is designed to reproduce the frequency range above 80 Hz, and should be used with the PX2181 subwoofer for fullrange. The enclosure shares the same footprint as other speakers in the Phoenix line for system flexibility.
Technical Specifications:
Freq. Response1 (-3 dB): |
80 Hz - 15 kHz |
Freq. Range1 (-10 dB): |
60 Hz - 19 kHz |
Rec. Hipass Frequency: |
80 Hz |
|
|
Axial Sensitivity1: |
102 dB (1W/1m) |
Max Calculated SPL1: |
138 dB |
Horizontal Coverage: |
45°, or 30° |
|
|
Vertical Coverage: |
30°, or 45° |
|
|
LF Power Handling: |
1000W Continuous, 4000W Peak |
|
|
HF Power Handling: |
80W Continuous, 320W Peak |
|
|
LF Transducer: |
(2) DVX3121, 12 in. (305 mm) Driver |
|
|
HF Transducers: |
(2) ND2-16, 2 in. (50mm) Diaphragm |
|
Compression Drivers |
Crossover Frequency: |
1600 Hz |
|
|
LF Impedance: |
4 Ohms Nominal |
|
|
HF Impedance: |
8 Ohms Nominal |
|
|
Connectors: |
(2) Neutrik Speakon NL4's |
|
|
Enclosure Material: |
18mm Plywood with Black EVCoatTM |
Suspension: |
(8) M10 Points - (6) on Top and (2) on |
|
Bottom of Enclosure |
|
|
Grille: |
Polyester Powder Coated, 16GA |
|
Galvanized Steel, with Rotatable Logo |
|
|
Dim (H x W x D): |
1219mm x 457mm x 445mm |
|
(48.00" x 18.00" x 17.50") |
Net Weight: |
50.1 kg (110.3 lbs) |
|
|
Shipping Weight: |
58.9 kg (129.6 lbs) |
|
|
1 Half Space measurement.