CE210W
Table of contents
Loading...
Important
Please read this User’s Manual carefully to
familiarize yourself with safe and effective
usage procedures.
Please retain this manual for future
reference
.
About TCO'03 ..........................................................48
FCC Declaration of Conformit
y ................................49
Hinweis zur Ergonomie / Recycle Auskunft /
Hinweise zur Auswahl des richtigen
Schwenkarms für Ihren Monito
r ..............................50
SAFETY SYMBOLS ..................................................2
PRECAUTIONS .........................................................
3
1. INTRODUCTION ...................................................
7
1-1. Features ........................................................... 7
1-2. Package Contents ............................................
8
1-3. Controls & Connectors .....................................
9
2. CABLE CONNECTION ........................................11
2-1. Before Connecting .......................................... 11
2-2. Connecting the Signal Cable ..........................
12
2-3. Connecting Two PCs to the Monitor ...............
16
3. ScreenManager ...................................................18
3-1. How to use the ScreenManager ..................... 18
3-2. ScreenManager Adjustments and Settings ....
19
3-3. FineContrast ...................................................
19
3-4. Useful Functions ............................................
21
4. ADJUSTMENT .....................................................23
4-1. Screen Adjustment ......................................... 23
4-2. Displaying Lower Resolutions ........................
26
4-3. Color Adjustment ............................................
27
4-4. Power-save Setup ..........................................
29
5. MAKING USE OF USB (Universal Serial Bus) ..............30
6. ATTACHING AN ARM ..........................................
32
7. TROUBLESHOOTING .........................................
34
8. CLEANING ..........................................................
37
9. SPECIFICATIONS ...............................................
38
10. GLOSSARY .......................................................
44
11.
APPENDIX/ANHANG/ANNEXE ........................46
2
SAFETY SYMBOLS
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can be
life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or
propertyor product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2006-2007 EIZO NANAO CORPORATION All rights reserved. No part of this manual may
be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information
confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt
of said information. Although every effort has been made to ensure that this manual provides up-to-date
information, please note that EIZO monitor specifications are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple, Macintosh, Power Macintosh and Power Mac are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager and ColorNavigator are trademarks of EIZO NANAO CORPORATION.
ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO CORPORATION
As an ENERGY STAR
®
Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Product specifications may vary depending on the region. Confirm the specifications in the manual written
in the language of the region of purchase.
PRECAUTIONS
3
PRECAUTIONS
IMPORTANT!
• This product has been adjusted specifically for use in the region to which it was originally shipped.
If operated outside the region to which it was originally shipped, the product may not perform as
stated in the specifications.
• To ensure personal safety and proper maintenance, please read this section and the caution statements
on the unit (refer to the figure below).
[Location of the Caution Statements]
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or
equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may
result in fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or
spillage into the cabinet may result in fire, electric shock, or equipment damage. If an
object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit
checked by a qualified service engineer before using it again.
4
PRECAUTIONS
WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment
damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock.
OK
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
•
Do not place outdoors.
•
Do not place in the transportation system (ship, aircraft, trains, automobiles,
etc.)
•
Do not place in a dusty or humid environment.
•
Do not place in a location where the steam comes directly on the screen.
•
Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away from
babies and children.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.Not doing so may result
in fire or electric shock.
Power supply: 100-120/200-240 Vac, 50/60 Hz
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
OK
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
•
The unit is designed for use with a specific voltage only. Connection to another
voltage than specified in this User's Manual may cause fire, electric shock, or
equipment damage.
Power supply: 100-120/200-240 Vac, 50/60 Hz
•
Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord with care.
•
Do not place the cord underneath the unit or other heavy objects.
•
Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may
result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
PRECAUTIONS
5
WARNING
When attaching an arm stand, please refer to the user's manual of the arm
stand and install the unit securely.
Not doing so may cause the unit to come unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock. When reattaching the tilt stand, please use the same screws and
tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes or
mouth.
If any part of the skin or body comes in direct contact with the panel, please wash
thoroughly. If some physical symptoms result, please consult your doctor.
Lamps contain mercury, dispose according to local, state or federal laws.
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with
the cord attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
OK
Do not block the ventilation slots on the cabinet.
•
Do not place any objects on the ventilation slots.
•
Do not install the unit in a closed space.
•
Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric
shock, or equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
6
PRECAUTIONS
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a
monitor in lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, note that the appearance of any
missing pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels:99.9994%or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker,
please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There
will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the
screen, it may deteriorate or damage your LCD panel. Leave the screen white or black to decrease the prints
When the screen image is changed after displaying the same image for extended periods of time, an
afterimage may appear. Use the screen saver or timer to avoid displaying the same image for extended
periods of time.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until
dew condensation disappears, otherwise it may cause some damages to it.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in
damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
1. INTRODUCTION
7
1. INTRODUCTION
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
CE210W
•
21" wide format LCD
•
Dual inputs compliant (DVI-I x 2)
•
DVI Digital input (TMDS ) compliant
•
[Horizontal scanning frequency]
Analog: 24 - 82 kHz
Digital: 31 - 65 kHz
[Vertical scanning frequency]
Analog: 49 - 86 Hz (1280x1024: 49-76Hz/1680x1050: 49 -61Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
[Resolution] 1680 dots x 1050 lines
•
Frame Synchronous mode supported (59 - 61 Hz)
•
Support to
sRGB standard
•
The provided "ColorNavigator CE" calibration software enables you to calibrate monitor
characteristics and generate ICC profiles (for Windows) and Apple ColorSync profiles (for
Macintosh) (refer to the EIZO LCD Utility Disk)
•
Smoothing function incorporated for the adjustment of an enlarged image
•
FineContrast modes, to select the most suitable mode for screen display
•
The ArcSwing Stand enables to adjust the monitor height and monitor angle freely .
CE240W
•
24" wide format LCD
•
Dual inputs compliant (DVI-I x 2)
•
DVI Digital input (TMDS) compliant
•
[Horizontal scanning frequency]
Analog: 24 - 94 kHz
Digital: 31 - 76 kHz
[Vertical scanning frequency]
Analog: 49 - 86 Hz (1600x1200: 49-76Hz/1920x1200: 49 -61Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
[Resolution] 1920 dots x 1200 lines
•
Frame Synchronous mode supported (59 - 61 Hz)
•
Support to
sRGB standard
•
The provided "ColorNavigator CE" calibration software enables you to calibrate monitor
characteristics and generate ICC profiles (for Windows) and Apple ColorSync profiles (for
Macintosh) (refer to the EIZO LCD Utility Disk)
•
Smoothing function incorporated for the adjustment of an enlarged image
•
FineContrast modes, to select the most suitable mode for screen display
•
The ArcSwing Stand enables to adjust the monitor height and monitor angle freely .
8
1. INTRODUCTION
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
•
LCD Monitor
•
Power Cord
•
Analog Signal Cable (FD-C16)
•
Digital Signal Cable (FD-C39)
•
EIZO USB Cable (MD-C93)
•
"EIZO LCD Utility Disk" CD-ROM
•
Calibration software "ColorNavigator CE" (in the CD-ROM)
•
ColorNavigator CE" Quick Reference
•
User's Manual (in the CD-ROM)
•
Setup Manual
•
LIMITED WARRANTY
•
Adjustment Certificate
•
Mounting Screws (M4 x 12 mm)
CE210W:4 pcs, CE240W:6 pcs
NOTE
•
Please retain the packing materials for future transference.
1. INTRODUCTION
9
1-3. Controls & Connectors
Front
SIGNAL AUTO ENTER
(1)
(4)
(2)
(6)
(7)
(3)
(8)
(5)
(1) ScreenManager
®
Monitor Adjustment menu
(2) Monitor Adjustment menu
Directly touching the left or right button allows you to select a
FineContras
t mode.
(3) Input Signal Selection Switch(SIGNAL) Switch the input signals when connecting 2 PCs.
(4) Auto Adjustment Switch (AUTO) Adjust the screen to appropriate condition automatically (analog
input only).
(5) Enter Switch (ENTER) Show the ScreenManager on the screen.
Confirm the setting / adjustment function.
Save the adjustment values.
(6) Directing Switch
( )
Select the desired function.
Increase and decrease the adjustment value.
(7) Power Switch (
)
ON or OFF the monitor's power.
(8) Power Indicator Indicate monitor's operation status.
Blue
Flashing blue
Orange
Off
: Operation
: Last 15 min. of operation time before entering the
power off state.
: Power saving
: Power off
Control Panel
10
1. INTRODUCTION
Rear / Side / Bottom (CE210W is given as an example.)
(9) Stand (Detachable) The LCD monitor can be used with an optional arm stand by
removing
the stand (See " 6. ATTACHING AN ARM ").
(10) Security Lock Slot Allows for connection of a security cable. This lock supports
Kensington's MicroSaver security system. For further
information, please consult:
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403 USA
Tel.: 800-650-4242, x3348, Intl: 650-572-2700, x3348
Fax: 650-572-9675
http://www.kensington.co
m
(11) Cable Holder House the cables
(12)Power Connector Connect the power cord.
(13) DVI-I Input (SIGNAL1/SIGNAL2) Connect the signal cable .
(14) USB Port (1 Upstream)
See 5. Making Use of USB Section.
(15) USB Port (2 Downstream)
(13)
(15)
(9)
(14)
(10)
(11)
(12)
Bottom
2. CABLE CONNECTION
11
2. CABLE CONNECTION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency)
in accordance with the charts below.
Tips
•
It is recommended to use this monitor in the digital signal input.
•
When your computer and display support VESA DDC, the suitable resolution and the refresh rate are
set by just plugging your display into the computer without any manual settings.
Analog Input
CE210W
Resolution Frequency Dot Clock Remarks
640×480 67Hz
150 MHz (Max.)
Apple Macintosh
640×480 ~85Hz VGA, VESA
720×400 70Hz VGA TEXT
800×600 ~85Hz VESA
832×624 75Hz Apple Macintosh
1024×768 ~85Hz VESA
1152×864 75Hz VESA
1152×870 75Hz Apple Macintosh
1280×960 60Hz VESA
1280×960 75Hz Apple Macintosh
1280×1024 ~75Hz VESA
1680×1050 60Hz VESA CVT,
VESA CVT RB
(Reduced Blanking)
CE240W
Resolution Frequency Dot Clock Remarks
640×480 67Hz
202.5 MHz (Max.)
Apple Macintosh
640×480 ~85Hz VGA, VESA
720×400 70Hz VGA TEXT
800×600 ~85Hz VESA
832×624 75Hz Apple Macintosh
1024×768 ~85Hz VESA
1152×864 75Hz VESA
1152×870 75Hz Apple Macintosh
1280×960 60Hz VESA
1280×960 75Hz Apple Macintosh
1280×1024 ~85Hz VESA
1600×1200 ~75Hz VESA
1680×1050 60Hz VESA CVT,
VESA CVT RB
(Reduced Blanking)
1920×1200 60Hz VESA CVT,
VESA CVT RB
(Reduced Blanking)
12
2. CABLE CONNECTION
Digital Input
The monitor supports the following resolutions only.
CE210W
Resolution Frequency Dot Clock Remarks
640×480 60Hz
120 MHz (Max.)
VGA
720×400 70Hz VGA TEXT
800×600 60Hz VESA
1024×768 60Hz VESA
1280×960 60Hz VESA
1280×1024 60Hz VESA
1680×1050 60Hz VESA CVT RB
(Reduced Blanking)
CE240W
Resolution Frequency Dot Clock Remarks
640×480 60Hz
162 MHz (Max.)
VGA
720×400 70Hz VGA TEXT
800×600 60Hz VESA
1024×768 60Hz VESA
1280×960 60Hz VESA
1280×1024 60Hz VESA
1600×1200 60Hz VESA
1680×1050 60Hz VESA CVT,
VESA CVT RB
(Reduced Blanking)
1920×1200 60Hz VESA CVT RB
(Reduced Blanking)
2-2. Connecting the Signal Cable
NOTE
•
Be sure that the power switches of both the PC and the monitor are OFF.
1
Plug the signal cable into the connector at the rear of the monitor and the other
end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Power Cord
2. CABLE CONNECTION
13
Analog Input
Signal Cable Connector of the PC PC
Signal Cable (FD-C16 enclosed) Video Output Connector / D-Sub mini 15
pin
Input Connector(monitor) / DVI
• Standard graphics card
• Power Macintosh G3
(Blue & White) /
Power Mac G4 (VGA)
Digital Input
Signal Cable Connector of the PC PC
Signal Cable (FD-C39 enclosed) Video Output Connector / DVI
Input Connector (monitor) / DVI
• Digital Graphics card
• Power Mac G4/G5 (DVI)
NOTE
•
The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector).
2
Plug the power cord into the power connector on the rear of the monitor.
3
Plug the other end of the power cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard power outlet of your country.
Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or
electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
14
2. CABLE CONNECTION
4
Lead the power cord and signal cable into the cable holder at rear of the monitor.
NOTE
•
The cables are recommended to lead with slight sag for the smooth motion of the stand.
5
Adjust the "height", "front and back position" and "angle" of the monitor.
1. Adjust the height of the monitor. To heighten, push the monitor backward. To lower, pull
the monitor forward.
2. Adjust the position and angle of the monitor. To adjust the angle of the monitor, hold the stand
with one hand and tilt the monitor with another hand by holding the upper side of the cabinet.
Grip both side of the center part
of the monitor and move slowly
(refer to the right figure.)
Move slowly
Both Side of Center
Part of the Monitor
3. If necessary, fine adjust the height of the monitor.
2. CABLE CONNECTION
15
6
Turn on the monitor's Power switch and then turn on the PC's power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the "
7. TROUBLESHOOTING" for advice.
Whenever finished, turn off the PC and the monitor.
Tips
•
When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is
displayed for a few seconds on the right top corner of the screen.
•
Adjust brightness of the screen depending on the brightness of your environment. Too dark or
toobright of a screen can cause eyestrain.
•
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
7
When using the software, ColorNavigator CE, connect the upstream port of the
monitor to the downstream port of the USB compliant PC or another hub with
the USB cable.
After connecting the USB cable, the USB function can be set up automatically. For further details
about the"ColorNavigator CE", refer to the readme.txt in the CD-ROM.
USB Cable
16
2. CABLE CONNECTION
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on
the back of the monitor.
Connecting Examples
SIGNAL1 SIGNAL2
(Ex.1) Analog
D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C39 enclosed)
DVI Digital
(Ex.2) Analog
D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional)
D-Sub
mini 15
pin
Analog
(Ex.3) Digital DVI
Signal Cable
(FD-C39 enclosed)
Signal Cable
(FD-C39 optional)
DVI Digital
Selecting the Active Input
The Input Signal Selection switch on the control panel can be used to select either SIGNAL 1 or SIGNAL
2 as the active input at any time. Every time the switch is touched, the input changes. When switching
the signal, the kind of the input signal (Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on
the right top corner of the screen.
This function is used to select which PC will have priority to control the monitor when utilizing two PCs.
SIGNAL1 SIGNAL2
Input Signal Selection Switch
The monitor constantly checks the input signals and switches automatically in accordance with the
"Input Priority" setting (see table below). Once a priority is set, whenever a change of signal is detected
at the selected input, the monitor will switch the input to that signal.
In the case of only one signal being present at either input, the monitor automatically detects and
displays that signal.
Loading...