PAS 80 Tooth Blade Trimmer Attachment |
1 |
Operator's Manual |
PAS 80 Tooth Blade Brushcutter
Attachment
99944200600
Operator's Manual
FOR MODELS:
SRM-2100SB TYPE 1/1E SRM-2400SB TYPE 1/1E SRM-210SB/211SB/225SB SRM-260SB/261SB PAS-2100 TYPE 1E PAS-2400 TYPE 1E PAS-2601 TYPE 1E PAS-210/211/225 PAS-230/231 PAS-260/261/265
warning
Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual with this attachment and a separate Operator's Manual and Safety Manual (if available) with the Power Head. All manuals must be read and understood for proper and safe operation. Failure to do so could result in serious injury.
X7702273303 |
X770000353 |
|
01/11 |
||
|
2
Introduction
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual included with your attachment. You will find this manual easy to use and full of helpful operations tips and SAFETY messages.
the operator's manual
Contains specifications and information for operation, starting, stopping, maintenance, storage, and assembly specific to this product.
the safety manual
Explains possible hazards involved with the use of Grass Trimmers and Brush Cutters and the measures you should take to insure safe operation.
Table of Contents |
|
|
Introduction.......................................................................... |
2 |
|
- |
The Operator's Manual................................................. |
2 |
- |
The Safety Manual....................................................... |
2 |
Safety.................................................................................... |
3 |
|
- Manual Safety Symbols and Important Information.... |
3 |
|
- |
International Symbols................................................... |
3 |
- Personal Condition and Safety Equipment................... |
4 |
|
- |
Equipment..................................................................... |
6 |
Description........................................................................... |
6 |
|
Contents................................................................................ |
7 |
|
Assembly.............................................................................. |
8 |
|
- Power Head Shaft/Attachment Lower Shaft |
|
|
|
Assembly...................................................................... |
8 |
- |
Install Handle/Barrier Bar............................................ |
9 |
- |
Blade Installation.......................................................... |
9 |
- |
Balance Unit............................................................... |
10 |
Operation............................................................................ |
10 |
CopyRight© 2011 By Echo, Incorporated
All Rights Reserved.
Maintenance....................................................................... |
10 |
|
- |
Skill Levels................................................................. |
11 |
- |
Maintenance Intervals................................................ |
11 |
- |
Lubrication................................................................. |
11 |
Storage................................................................................ |
12 |
|
Specifications...................................................................... |
12 |
|
Servicing Information......................................................... |
16 |
|
- |
Parts/Serial Number.................................................... |
16 |
- |
Service........................................................................ |
16 |
- ECHO Consumer Product Support............................. |
16 |
|
- |
Warranty Card............................................................. |
16 |
- Additional or Replacement Manuals.......................... |
16 |
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.
PAS 80 Tooth Blade Trimmer Attachment |
3 |
Operator's Manual |
Safety
manual safety symbols and important information
Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.
DANGER
The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided.
WARNING
The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition which CAN lead to serious personal injury or death if not avoided.
CAUTION
The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided.
Circle and slash symbol
This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury.
NOTE
This enclosed message provides tips for use, care and maintenance of the unit.
IMPORTANT
The enclosed message provides information necessary for the protection of the unit.
international symbols
Symbol form/shape |
Symbol |
Symbol form/shape |
|
Symbol |
||
description/application |
description/application |
|||||
|
|
|
|
|
|
|
|
Read and understand |
|
|
|
Fuel and oil mixture |
|
|
Operator's Manual. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Wear eyes, ears and |
|
|
|
Finger Severing |
|
|
head protection |
|
|
|
|
|
|
|
|
|
|
|
|
|
Hot |
|
|
|
Wear hand |
|
|
|
|
|
protection. Use |
||
|
Surface |
|
|
|
two handed. |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
Safety/Alert |
|
|
|
DO NOT smoke |
|
|
|
|
|
|
near fuel. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Avoid all power |
|
|
|
Do not operate |
|
|
lines. This unit |
|
|
|
closer than 15 M |
|
|
is not insulated |
|
|
|
(50 ft.) from elec- |
|
|
against electrical |
|
|
|
trical |
haz- |
|
current. |
|
|
|
|
ards. |
|
Keep bystanders |
|
|
|
Plan retreat |
|
|
at least 15 meters |
|
|
|
||
|
|
|
|
path from falling |
||
|
(50 feet) away. |
|
|
|
||
|
|
|
|
objects. |
||
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Symbol form/shape |
Symbol |
Symbol form/shape |
Symbol |
description/application |
description/application |
DO NOT allow |
Wear slip resis- |
|
flames or sparks |
tant foot wear. |
|
near fuel. |
|
|
|
|
|
Engine choke |
Ignition |
|
control. |
ON/OFF |
|
|
||
|
|
|
Emergency stop |
Primer bulb |
|
|
||
|
|
|
Chain lubrication |
Carburetor adjustment |
|
- High speed mixture |
||
|
|
|
Carburetoradjustment |
Carburetor adjustment |
|
- Idle speed |
||
- Low speed mixture |
||
|
Keep bystanders and helpers away 15 m (50 ft.).
4
personal condition and safety equipment
WARNING
Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit.
Physical Condition
Your judgment and physical dexterity may not be good:
•if you are tired or sick,
•if you are taking medication,
•if you have taken alcohol or drugs.
Operate unit only if you are physically and mentally well.
Eye Protection
Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the unit.
Hand Protection
Wear no-slip, heavy-duty work gloves to improve your grip on the handle. Gloves also reduce the transmission
of machine vibration to your hands.
Hearing Protection
ECHO recommends wearing hearing protection whenever unit is used.
Extended Operation/Extreme Conditions
Proper Clothing
Wear snug fitting, durable clothing;
•Pants should have long legs, shirts with long sleeves.
•DO NOT WEAR SHORTS,
•DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become entangled in moving parts or surrounding growth.
Wear protective hair covering to contain long hair.
Wear sturdy work shoes with nonskid soles;
•DO NOT WEAR OPEN TOED SHOES,
•DO NOT OPERATE UNIT BAREFOOTED.
Keep long hair away from engine and air intake. Retain hair with cap or net.
Hot Humid Weather
Heavy protective clothing can increase operator fatigue which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler.
It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, because the minimum exposure, which might trigger the ailment, is unknown.
•Keep your body warm, especially the head, neck, feet, ankles, hands, and wrists.
•Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and also by not smoking.
•Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held power equipment is not required.
•If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration.
PAS 80 Tooth Blade Trimmer Attachment |
5 |
Operator's Manual |
Repetitive Stress Injuries
It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.
To reduce the risk of RSI/CTS, do the following:
•Avoid using your wrist in a bent, extended, or twisted position.
Instead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger.
•Take periodic breaks to minimize repetition and rest your hands.
•Reduce the speed and force with which you do the repetitive movement.
•Do exercise to strengthen the hand and arm muscles.
•Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented.
danger
Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.
Read the Manuals
•Provide all users of this equipment with the Operator’s Manual and
Safety Manual for instructions on Safe Operation.
Clear the Work Area
•Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.
Keep a Firm Grip
•Hold the front and rear handles with both hands, with thumbs and fingers encircling the handles.
Keep a Solid Stance
•Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.
Avoid Hot Surfaces
•Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.