Dynex DX37L130A11, DX-32L151A11 User Manual

0 (0)

32" and 37" LCD TVs

DX-32L151A11/DX-37L130A11

USER GUIDE

ii

Dynex DX-32L151A11/DX-37L130A11

32" and 37" LCD TVs

Contents

CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Installing the stand or removing the stand column . . . . . . . . . . . . . 4

Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Removing the stand column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Installing a wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Programming a universal remote control to work with your TV . . . . . . . . . .8

Making connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Connecting the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Connecting an HDMI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Connecting a component video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Connecting an antenna, cable TV, or satellite TV box . . . . . . . . . . . . . . . . . . . .9 Connecting a VCR, camcorder, or game console . . . . . . . . . . . . . . . . . . . . . . 10 Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting a home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Displaying program information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Adjusting basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Adjusting the computer image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Selecting the audio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

iii

Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Selecting the signal source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setting up a favorite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Adding or changing a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Checking digital TV signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Turning parental controls on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Turning the button lock on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Setting parental control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Turning closed captioning on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Selecting the closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Customizing digital TV closed captioning styles . . . . . . . . . . . . . . . . . . . . . . . 24

Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Selecting the menu language and transparency . . . . . . . . . . . . . . . . . . . . . . 26 Labeling an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Restoring default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

US and Canada Markets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Mexico Market . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

iv

DX-32L151A11/DX-37L130A11 1

CHILD SAFETY

It makes a difference how and where you use your flat panel display

As you enjoy your new product, keep these safety tips in mind

The issue

The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.

TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.

Tune into safety

One size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV.

Carefully read and understand all enclosed instructions for proper use of this product.

Don’t let children climb on or play with entertainment system furniture and TVs.

Don’t place TVs on furniture that can easily be used as steps, such as a crate or chest of drawers.

Remember that children can become excited while watching a program, especially on a “larger-than-life” TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down.

Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children.

Wall mounting

If you decide to wall mount your TV, always remember:

One size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV.

Follow all instructions supplied by the TV and wall mount manufacturers.

If you have any doubts about your ability to safely wall mount your TV, get help from a professional installer.

Make sure that the wall where you are mounting the TV is

appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer.

TVs can be heavy. At least two people are required for safe wall mount installation.

2

DX-32L151A11/DX-37L130A11

Important safety instructions

Important safety instructions

CAUTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with a dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Use only with a cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to S3125A avoid injury from tip-over.

13Unplug this apparatus during lightning storms or when unused for long periods of time.

14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15The wall plug is the disconnecting device. The plug must remain readily operable.

16An apparatus with a three-prong, grounding-type plug is a Class I apparatus, which needs to be grounded to prevent possible electric shock. Make sure that you connect this Class I television to a grounding-type, three-prong outlet.

17Remote control batteries should not be exposed to excessive heat such as sunshine, fire, or the like.

18The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, should be placed on the apparatus.

Warnings

Electric shock hazard

To reduce the risk of fire or electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualified service technicians.

Lightning

For added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges.

Power lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

Handling the LCD panel

Your TV’s screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass.

If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.

If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

Replacement parts

When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.

Safety check

After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.

Power source

Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.

Cautions

Damage requiring service

Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions:

When the power supply cord or plug is damaged or frayed.

If liquid has been spilled or objects have fallen into your TV.

If your TV has been exposed to rain or water.

Important safety instructions

DX-32L151A11/DX-37L130A11

3

If your TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation.

If your TV has been dropped or damaged in any way.

When your TV exhibits a distinct change in performance.

Outdoor antenna grounding

If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

 

1

 

2

 

3

 

4

 

5

7

6

1Antenna lead-in wire

2Grounding clamp

3Antenna discharge unit

4Grounding conductors

5Ground clamps

6Power service grounding electrode system

7Electric service equipment

Note to CATV system installer

Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Specifically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.

Condensation

Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV.

Mobile telephone warning

To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV.

End of life directives

Your TV contains tin-lead solder and a fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to find a recycler in your area.

Non-active pixels

The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.

4

DX-32L151A11/DX-37L130A11

Installing the stand or removing the stand column

Installing the stand or removing the stand column

Cautions

Read these instructions carefully before you try to assemble the stand or remove the stand column.

Make sure that you handle the TV carefully when attempting to assemble or remove the stand. If you are not sure of your ability to do this, contact a professional installer or service technician. Dynex is not responsible for any damages or injuries that occur because of mishandling or incorrect assembly.

Use a soft cushion or covering to prevent scratching or damage to the TV screen or cabinet.

The speaker is not intended to support the weight of the TV. Do not move or handle the TV by the speaker. This can cause damage that is not covered by your warranty.

Before assembly or removal of the stand, unplug the power cord. You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column.

Installing the stand

You must install the stand to use the TV in an upright position on a flat surface.

Note: Your TV may differ from the illustrations shown.

To install the stand:

1 Remove the stand from the box and place it on a table or bench.

2Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV.

4 Carefully lift the TV into an upright position.

To remove the stand, perform these steps in reverse order.

Removing the stand column

You must remove the stand column before you can wall-mount the TV.

Note: Your TV may differ from the illustrations shown.

To remove the stand column:

1Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV.

2Remove the four screws holding the stand column to the TV, then remove the stand column.

Stand column

Table edge

Stand

Stand column

3Align the locators on the stand column with the locating holes on the stand, then secure the stand to the column with the four M5 screws (provided).

Locators

Locating holes

Table edge

Stand

Installing a wall-mount bracket

If you want to attach the TV to a wall-mount bracket (not provided), you should first remove the stand pedestal, if it is already attached.

To install a wall-mount bracket:

1Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched.

2 Remove the pedestal stand.

3Remove the stand column. See “Removing the stand column” on page 4.

4Secure the wall-mount bracket to the back of your TV using the four M6 screws provided with the bracket.

TV components

Accessories

Make sure the following accessories are included in the box with your TV:

Remote control

Composite video & audio cable

AC power cord

AAA batteries (2)

Stand

Quick Start Guide

Four M5 screws

TV components

DX-32L151A11/DX-37L130A11

5

Front

Side

Item

Name

Description

 

 

 

 

Remote control

Receives signals from the remote control.

1

Do not block. For more information, see

sensor

 

“Aiming the remote control” on page 8.

 

 

 

 

 

 

Power indicator

Lights red when your TV is in standby mode.

2

Flashes red when your TV is turned on, then

 

 

turns off when the TV stabilizes.

 

 

 

Item

Name

Description

 

 

 

In TV mode, press to select the next or

1

CH / CH

previous channel.

 

 

 

In menu mode, press to move up or down.

 

 

 

 

 

 

 

In TV mode, press to increase or decrease the

2

VOL+ / VOL-

volume.

In menu mode, press to move right or left or to

 

 

 

 

 

 

adjust menu settings.

 

 

 

 

3

MENU

Press to open the on-screen menu.

 

 

 

 

 

INPUT

Press to open the INPUT SOURCE menu. For

4

more information, see “Selecting the video

 

 

 

input source” on page 12.

 

 

 

 

 

 

 

Press to turn on the TV or put the TV in standby

5

 

 

mode.

 

(power)

Caution: The TV continues to receive power

 

 

 

 

 

even in standby mode. Unplug the power cord

 

 

 

to disconnect power.

Dynex DX37L130A11, DX-32L151A11 User Manual

6

DX-32L151A11/DX-37L130A11

TV components

Back

 

SERVICE PORT

 

HDMI 2

 

R

IN

AUDIO

AV

L

 

VIDEO

Item

Name

Description

 

 

Connect component video devices to these

9

COMPONENT IN

jacks

jacks. For more information, see “Connecting

 

a component video device” on page 9.

 

 

 

 

 

 

AUDIO OUT jacks

Connect an audio amplifier to these jacks.

10

For more information, see “Connecting a

 

 

home theater system“ on page 10.

 

 

 

 

ANT/CABLE IN

Connect an antenna or cable TV to this jack.

11

For more information, see “Connecting an

 

jack

antenna, cable TV, or satellite TV box” on

 

 

page 9.

 

 

 

Remote control

 

 

 

AUDIO

 

 

 

AUDIO OUT

L AUDIO R ANT/ CABLE IN

 

 

 

 

 

 

 

 

 

 

 

 

 

VGA

Y

PB

 

PR

L AUDIO R

 

DIGITAL OUTPUT HDMI 1

PC IN

 

 

 

COMPONENT IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item

Name

Description

 

 

 

1

SERVICE PORT

For software updates only. Do not use.

 

 

 

 

(headphone)

Plug headphones into this jack. For more

 

 

 

2

information, see “Connecting headphones”

 

 

 

jack

 

 

 

 

on page 11.

 

 

 

 

 

 

 

 

 

HDMI 2 jack

Connect an HDMI device to this jack. For

 

 

 

3

more information, see “Connecting an HDMI

 

 

 

 

 

device” on page 9.

 

 

 

4

AV IN jacks

Connect a standard AV device, such as a

 

 

 

camcorder or game console, to these jacks.

 

 

 

 

 

 

 

 

 

AC IN

Plug the power cord into this jack and into a

 

 

 

5

power outlet. For more information, see

 

 

 

 

 

“Connecting the power” on page 8.

 

 

 

 

 

Connect a digital optical cable to this

 

 

 

6

DIGITALOUTPUT connector, then to a digital sound system.

 

 

 

jack

For more information, see “Connecting

 

 

 

 

 

 

 

 

 

using a digital audio cable” on page 11.

 

 

 

 

HDMI 1 jack

Connect an HDMI device to this jack. For

 

 

 

7

more information, see “Connecting an HDMI

 

 

 

 

 

device” on page 9.

 

 

 

 

PC IN VGA /

Connect a computer to these jacks. For more

Item

Name

Description

8

information, see “Connecting a computer”

 

 

 

AUDIO jacks

 

 

Press to turn on the TV or put the TV in standby

 

on page 10.

 

 

 

 

 

 

 

 

 

 

 

mode.

 

 

 

1

POWER

Caution: The TV continues to receive power

 

 

 

 

 

even in standby mode. Unplug the power cord

 

 

 

 

 

to disconnect power.

 

 

 

2

COMP

Press to select the device connected to the

 

 

 

COMPONENT IN jacks

 

 

 

 

 

Using the remote control

DX-32L151A11/DX-37L130A11

7

Item

Name

Description

 

 

 

 

 

 

Press once to select a device connected to the

3

HDMI

HDMI 1 jack.

 

Press twice to select a device connected to the

 

 

 

 

HDMI 2 jack.

 

 

 

 

 

 

Press the number buttons to enter channel

 

 

numbers or the parental control password.

4

Numbers/.

Press the dot button to select a digital

sub-channel.

 

 

 

 

 

 

For more information, see “Selecting a channel”

 

 

on page 12.

 

 

 

 

 

INPUT

Press to open the INPUT SOURCE menu. For

5

more information, see “Selecting the video

 

 

input source” on page 12.

6

VOL+ / VOL–

Press to increase or decrease the volume.

 

 

 

7

MENU

Press to open the on-screen menu.

 

 

 

 

 

 

 

Press

or

to move up or down in on-screen

8

 

menus.

 

 

 

Press

or

to move left or right in on-screen

 

 

 

 

menus or to adjust menu settings.

 

 

 

9

ENTER

Press to confirm selections in on-screen menus

or to open sub-menus.

 

 

 

 

 

 

GUIDE

Press to open the DTV program guide (if

10

available). For more information, see

 

 

“Displaying program information” on page 13.

 

 

 

 

 

In analog TV mode, press to select STEREO,

11

MTS/SAP

SAP (secondary audio language), or MONO.

In digital TV mode (DTV), press to select the

 

 

audio track. For more information, see

 

 

“Selecting the audio mode” on page 16.

 

 

 

 

CCD

Press to turn closed captioning on or off. For

12

more information, see “Turning closed

 

 

captioning on or off” on page 23.

 

 

 

 

 

Press to select the screen aspect ratio. You can

13

ZOOM

select Auto, Normal, Zoom, Wide, and

Cinema. For more information, see “Adjusting

 

 

 

 

the TV picture” on page 14.

 

 

 

 

FAVORITE

Press to open the favorite channel list. For more

14

information, see “Setting up a favorite channel

 

 

list” on page 18.

 

 

 

15

VIDEO

Press to select the device connected to the AV

IN Jack.

 

 

 

 

 

 

 

 

 

 

TV

Press to select the TV as the video input source.

16

For more information, see “Selecting the video

 

 

input source” on page 12.

 

 

 

 

RECALL

Press to go to the last viewed channel. For more

17

information, see “Selecting a channel” on page

 

 

12.

 

 

 

 

 

 

 

Press to go to the next or previous channel in

18

CH /CH

the channel list. For more information, see

“Automatically scanning for channels” on

 

 

 

 

page 17 and “Selecting a channel” on page 12.

 

 

 

19

MUTE

Press to mute the sound. Press again to restore

the sound.

 

 

 

 

 

 

 

 

INFO

Press to display the information banner. For

20

more information, see “Displaying program

 

 

information” on page 13.

 

 

 

21

EXIT

Press to close the on-screen menu.

 

 

 

22

SLEEP

Press to set the sleep timer. For more

information, see “Setting the sleep timer” on

 

 

page 26.

 

 

 

 

 

 

 

Item

Name

Description

 

 

 

Press to open the channel list. For more 23 CH-LIST information see “Selecting a channel” on

page 12.

Press to select the picture mode. You can select

24 PICTURE Vivid, Standard, Theater, Sports, Energy Saving, and Custom. For more information, see

“Adjusting the TV picture” on page 14.

Press to select the sound mode. You can select

25 AUDIO Standard, Movie, Music, News, or Custom. For more information, see “Adjusting the sound” on

page 15.

Using the remote control

Installing remote control batteries

To install remote control batteries:

1Press down on the battery compartment cover lock, then remove the remote control cover.

2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.

3Replace the cover. Make sure that the lock snaps into place.

Battery precautions:

Dispose of batteries as hazardous waste.

Do not mix batteries of different types.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and can cause old batteries to leak.

Remove batteries as soon as they become inoperable. Chemicals that can leak from the batteries can cause a rash. If the batteries leak, clean the battery compartment with a cloth.

If the remote control is not used for an extended period of time, remove the batteries.

Do not expose batteries to excessive heat such as sunshine, fire, or other heat sources.

8

DX-32L151A11/DX-37L130A11

Making connections

Aiming the remote control

To aim the remote control:

Point the remote control towards the remote sensor on the front of your TV.

Notes:

Do not expose the remote control to shock or liquids.

Do not use the remote control in an area with high humidity.

Do not place the remote control in direct sunlight.

Do not place objects, such as furniture, between the remote control and the remote sensor.

The remote control may not work if direct sunlight or bright light shines on the remote sensor. Either move your TV or change the angle at which you use the remote control.

Programming a universal remote control to work with your TV

You can operate your TV with a new or existing universal remote control.

To program your existing universal remote control:

1To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit www.dynexproducts.com for the latest remote control code information.

Dynex TV codes for universal remote controls

(for all Dynex TVs manufactured after Jan. 1, 2007)

Universal remote control manufacturer and model

 

 

 

 

 

 

Philips

RCA

One for All

Sony

 

PHDVD5,

RCU807

URC-6690

RM-VL600

 

PH5DSS,

 

 

 

 

 

PMDVR8,

 

 

 

 

PDVR8

 

 

 

 

115

135

0464

8043

 

 

 

 

 

 

 

Set-top box manufacturer and model

 

 

 

 

 

 

 

Comcast

Dish

Motorola

TIVO

DirectTV

M1057

Network

DRC800

Series 3, HD RC23

VIP508,

 

 

 

 

 

VIP622

 

 

 

 

 

 

 

 

0463

720

0463

0091

10463

 

 

 

 

 

Codes for other remote controls are available online at: http://www.dynexproducts.com/universalcontrolcodes.aspx

Tips:

The brand name is often visible on the front of the universal remote control, and the model number is often visible on the back.

The codes shown above are common codes, but are subject to change. Please refer to Dynexproducts.com for the most up to date codes.

If your universal remote control isn’t listed on the chart, refer to your universal remote control’s instructions and try codes for the brands Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need to try several codes before finding a match.

2Follow your universal remote control’s instructions to enter the code you found in Step 1.

Tips:

If your universal remote control has a code search feature, run a code search to identify a code that matches your TV. See your universal remote control’s instructions for details.

If your universal remote control has a “learn” feature, you can manually program it using your TV remote to “teach” the commands one at a time. See your universal remote control’s instructions for details.

3If all else fails, you must use a different universal remote control that can operate both your set-top box and your TV. Five such remotes are listed on the chart, but many other compatible models are available in the market.

4For more help, call technical support for your universal remote control or set-top box manufacturer, or call the Dynex Customer Care Center. For US and Canada markets, call 1-800-305-2204.

For Mexico markets, call 01-800-926-3020.

Making connections

Before you make any connections:

Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV.

Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems.

When connecting devices to the TV, make sure that the TV and the device are turned off and that the power cords are unplugged.

Selecting a location

You should select a location for the TV:

Where direct light does not reflect on the screen

That has indirect and soft lighting

Where the TV has access to an antenna or cable TV connection

Where the TV has access to a power outlet

Note: Watching TV in total darkness or with a reflection on the screen may cause eye strain.

Connecting the power

To connect the power cord:

Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet.

Power cord

Power outlet

Loading...
+ 25 hidden pages