M25
Digital USB Postal Scale User Guide
Guide d'utilisation de la Balance postale USB numérique
M10
|
M25
DYMO® Digital USB Postal Scale. . . . . . . . . . . . .1
Balance postale USB numérique DYMO . . . . .7
M10
|
M25
1
DYMO® Digital USB Postal Scale
This User Guide provides instructions for
using your DYMO
®
Digital USB Postal Scale.
Visit
www.dymo.com/register
to register
your scale.
Setting Up the Scale
The scale is powered through a USB port on
your computer. When not connected to your
computer, the scale can be powered by three
AAA batteries.
To set up the scale
1. Unpack the scale.
2. Set the scale on a firm, flat surface.
3. Plug the USB cable into the USB port on
the back of the scale.
4. Plug the USB cable into an available USB
port on your computer.
The scale is automatically recognized by
your computer when the power is turned on.
When connecting the scale through a
USB hub, always use a powered hub.
Inserting the Batteries
When not connected to your computer, the scale can be powered by
three AAA alkaline batteries. The scale automatically turns off after
three minutes of inactivity.
To insert the battery
1. Disconnect the USB cable from the computer or USB hub.
2. Turn the scale over.
3. Remove the battery compartment cover.
4. Insert three AAA batteries as shown.
Make sure to insert the batteries correctly. Inserting the
batteries backwards can damage the scale.
5. Replace battery compartment cover.
Remove the batteries if the scale will not be used for a long period of time.
Power
LCD
display
Kg/Lb
Hold
Zero/
Tar e
USB port
LED
!
AAA
AAA
AAA
AAA
AAA
AAA
!
!
2
Turning On the Power
The scale has an Auto Shut Off feature which automatically turns off the scale after three
minutes of inactivity.
To turn the scale on
♦
Press on the front of the scale.
When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing
items. The display shows
0.0
when ready.
To turn the scale off
♦
Press on the front of the scale to turn the scale off.
The scale turns off automatically after three minutes of inactivity.
Using the Scale
Always wait for
0.0
to display before placing an item on the
scale platform.
After placing an item on the scale, wait for several seconds for
the weight to appear. When the scale is ready, a
o
appears to the
left of the weight.
To weigh an item
♦
Place an item on the scale platform.
Using the Tare Feature
You can weigh small items or items that cannot be easily placed on the scale platform by
placing the items in a container and using the Tare/Zero button to eliminate the weight of
the container.
To use the tare feature
1. Place an empty container on the platform.
2. When the scale is ready, press .
The display is set to zero.
3. Place the items to be weighed in the container.
The display shows the weight of the items, without the weight of the container.
4. After removing the container, press to reset the scale to zero.
0.0
TARE
0.0
TARE
Loading...