LetraTag®
LT-100T
User Guide
www.dymo.com
T Momentum AUS.indd 1 |
19-03-2007 09:12:46 |
LetraTag User Guide
≠ |
Label Exit |
∑ |
Settings |
Æ |
Memory Save |
∏ |
Clear |
ß |
Memory Recall |
π |
Space Bar |
∞ |
∫ |
OK |
|
± |
LCD Display |
ª |
Navigation |
≤ |
Power Connector |
º |
Cancel |
≥ |
Power |
Ω |
Num Lock |
¥ |
Cutter |
æ |
CAPS |
µ |
Insert |
ø |
Back Space |
∂Format
≠ |
Æ ß ∞ ± |
≤ |
≥ |
|
|
¥ |
|
∫ |
µ |
|
ª |
∂ |
Cancel |
º |
∑
Ω
Clear |
æ |
∏ |
ø |
π
Figure 1 DYMO LetraTag Labelmaker
T Momentum AUS.indd 2 |
19-03-2007 09:12:47 |
About Your New Labelmaker |
° |
With your new DYMO LetraTag® labelmaker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different font sizes and styles. The labelmaker uses DYMO LetraTag (LT) 12 mm label cassettes. LT cassettes are available in multiple colors of plastic and metallic tape, and in white iron-on tape.
Visit www.dymo.com for information on obtaining labels and accessories for your labelmaker.
Warranty Registration
Please complete the warranty registration card and return it to the appropriate Customer Support address within seven days. Visit www.dymo.com/registration for details or to register online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The labelmaker is powered by standard batteries or an AC power adapter. To save power, the labelmaker will automatically turn off after two minutes of inactivity.
T Momentum AUS.indd 3 |
19-03-2007 09:12:47 |
Inserting the Batteries
The labelmaker uses four high-capacity AA alkaline batteries.
To insert the batteries
1. Remove the battery compartment cover. See Figure 2.
2. Insert the batteries following the polarity markings (+ and –).
3. Replace the cover.
ÇRemove the batteries if the |
|
labelmaker will not be used for a long |
|
period of time. |
Figure 2 |
Connecting the Optional Power Adapter
An optional 9 Volt,1.5 A power adapter can also be used to power the labelmaker. Connecting the AC adapter to the labelmaker disconnects the batteries as a power source.
To connect the power adapter
1.Plug the power adapter into the power connector on the top of the labelmaker.
2.Plug the other end of the power adapter into a power outlet.
T Momentum AUS.indd 4 |
19-03-2007 09:12:48 |
ÇMake sure the labelmaker power is turned off before you disconnect the power adapter from the main power source. Otherwise, your most recent memory settings will be lost.
Inserting the Label Cassette
Your labelmaker comes with one label cassette. Visit www.dymo. com for information about purchasing additional label cassettes.
To insert the label cassette
1.Lift the label cassette cover to open the label compartment.
See Figure 3.
ÇBefore using the labelmaker for the first time, remove the protective cardboard insert from label exit slot. See Figure 4.
2.Insert the cassette with the label positioned between the print head and pinch roller.
3.Press firmly until cassette clicks into place.
Figure 3
Figure 4
4. Close the label cassette cover and press âto turn on the power.
T Momentum AUS.indd 5 |
19-03-2007 09:12:50 |
Selecting a Language
The first time you turn on the power, you are asked to select your desired language. By default, the language is set to English. The language option you choose determines the character set that is available.
To select a language
1.Press ä.
2.Use the up or down arrow key to select Language and press ã.
3.Use the up or down arrow key to select the language you want and press ã.
Setting the Date and Time
You need to set the current date and time so that the date is correct if you choose to automatically insert a date on your label.
To set the date and time
1.Press ä.
2.Use the up or down arrow key to select Set Date and press ã. The default date is displayed.
3.Use the left or right arrow key to move the cursor over each setting (month, day, and year) and use the up or down arrow
keys to increase or decrease the value.
T Momentum AUS.indd 6 |
19-03-2007 09:13:36 |
4.When finished, press ã. The default time is displayed.
5.Use the left or right arrow key to move the cursor over each setting (hours and minutes) and use the up or down arrow keys to increase or decrease the value.
6.When finished, press ã.
Printing Your First Label
You are now ready to print your first label.
To print a label
1.Enter text to create a simple label.
2.Press å.
3.Press the cutter button to cut the label.
Congratulations! You printed your first label. Continue reading to learn more about the options available for creating labels.
T Momentum AUS.indd 7 |
19-03-2007 09:13:37 |
Getting to Know the Labelmaker
Become familiar with the location of the feature and function keys on your labelmaker. Refer to Figure 1 on the inside front cover. The following sections describe each feature in detail.
Power
The âbutton turns the power on and off. After two minutes of no activity, the power is switched off automatically. The last label created is remembered and displayed when the power is turned back on. The previously selected style settings are also restored.
You can also press âto cancel printing and return to edit mode.
LCD Display
You can enter up to 100 characters and |
|
|
|
spaces on a label; however, the display |
|
|
|
|
|
|
|
will only show a small portion of the |
|
|
|
characters. And, with DYMO’s exclusive |
|
|
|
graphical display, any formatting you |
≠ Font size |
ß CAPS |
|
add is visible instantly. |
|||
For example, the italics and rounded |
Æ # lines |
∞ Num Lock |
|
border added to the text in Figure 5 |
|
Figure 5 |
|
are clearly displayed. |
|
|
|
Feature indicators appear along the top of the display to let you know when a feature is selected.
T Momentum AUS.indd 8 |
19-03-2007 09:13:39 |
Loading...