Dukane 8776-RJ User Manual

Size:
11.85 Mb
Download

Portable LCD Projector

Models 8776

Model 8776-RJ

Model 8755E-RJ

User's Manual

#070035

Projector

8755E-RJ,8776 & 8776RJ

User's Manual – Operating Guide

Thank you for purchasing this projector.

WARNING ►Before using this product, please read this manual and related manuals to ensure the proper use of this product.

After reading, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are described below.

WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

Please refer to the pages written following this symbol.

NOTE • The information in this manual is subject to change without notice.

The manufacturer assumes no responsibility for any errors that may appear in this manual.

The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.

Trademark acknowledgment

VGA and XGA are registered trademarks of International Business Machines Corporation.

Apple and Mac are registered trademarks of Apple Computer, Inc.

VESA and SVGA are trademarks of Video Electronics Standard Association.

Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

Technical Information Sec. . . . 1-17

Network Functions Section . . . 1-38

Projector features / Preparations

Projector features

This projector is used to project various computer signals as well as NTSC/PAL/ SECAM, Component (SD, HD) video signals onto a screen. It requires a small space for installation and produces a large image at a short throw distance.

High Brightness

Newly developed 200W UHB (Ultra High Brightness) lamp gives you a brighter image on the screen. The image is bright enough for use in fully lighted rooms.

Low Noise

WHISPER mode is available for reducing acoustic noise and quieter operation. It is perfect for use in dimly lighted rooms where low noise is more important than brightness.

Rich Connectivity

This projector has a variety of I/O ports. It can be easily connected to many signal sources like PC, DVD and so on. The rich connectivity provides you more options for an impressive presentation.

Compact Body

Even with its many features, this projector has a small form factor.

Preparations

About contents of package

Your projector should come with items indicated on literature sheet. Contact your dealer immediately if anything is missing.

NOTE • Keep the original packing materials for future reshipment. When moving the projector, be sure to use the original packing materials. Use special caution for the lens part.

Fastening the lens cover

To avoid losing the lens cover, please fasten the lens cap to the projector using the strap.

 

Strap ring

 

Strap

Bottom side

Strap hole

 

 

1. Fix the strap to the strap ring of the lens cover.

2. Put the strap into the groove on the rivet.

3. Push the rivet into the strap hole.

Part names

Part names

Projector

ê

Lamp cover (54) (Lamp unit is inside.)

Zoom ring (19)

Focus ring (19)

Vent

Lens (17)

Lens cover (3)

ê

Control buttons (6)

Remote sensor (16) Speaker

Security bar (10) (Use for attaching a commercialanti-theftchain or wire.)

Elevator button (9)

Front-Rightside

 

B

 

 

 

 

 

T

US

 

 

 

 

 

OUO

 

L

 

 

 

 

UDIA T

RO

 

 

 

 

OUB

 

CONT

 

 

 

 

RG

 

 

 

 

 

 

 

2

 

 

 

 

N

 

INB

 

 

O

 

 

RG

 

2IN

LA

 

 

 

1

VIDE-S

 

 

 

 

INO O

EODVI

 

 

 

 

1INB UDIAUDIA

 

 

 

 

 

RG

R

 

 

 

 

 

 

/PRC

 

 

 

 

 

 

B

 

 

 

 

 

 

/PBC

 

 

 

 

 

3IN

 

 

 

 

 

 

UDIOA

 

 

 

 

 

 

Y

Elevator foot (9)

Filter cover (55)

(Air filter and intake vent are inside.)

Bottom side

WARNING ►During use or immediately after use, do not touch around the lamp and vents of the projector. (ê) It could cause a burn.

Ports (See below.)

CB/PB

 

 

 

 

 

 

 

CR/PR

 

 

RGB IN1

 

 

 

 

VID

A

A

 

 

 

 

EO

UDIOUDIO IN1

 

 

 

 

S-VI

 

 

IN2

RGB IN2

 

 

DEO

 

 

 

 

LAN

 

 

 

 

CO

NTR

RGB

OUT

 

 

 

 

 

 

 

 

 

 

 

A

 

 

 

 

 

OL

 

UDIO

 

 

 

 

 

 

USB

OUT

 

 

 

 

 

 

 

Rear-Leftside

Part names

Power switch (17)

AC inlet (14)

Elevator button (9)

AC

IN

Elevator foot (9)

Vent

 

 

 

AUDIO IN1 port (12)

 

 

 

 

(In the default setting, the AUDIO IN1 port is the audio

AUDIO IN3 L/R port (13)

 

port for the RGB IN1 port, however, it is possible to

 

change the settings. 36)

 

(In the default setting, the

 

 

 

 

 

AUDIO IN3 L/R port is the audio

 

RGB IN1 port (12)

 

port for the VIDEO, S-VIDEO

 

 

and COMPONENT VIDEO

 

 

 

Restart switch (*) (62)

 

ports, however it is possible to

 

 

RJ Only

 

 

 

change the settings. 36)

 

 

 

RGB IN2 port (12)

 

 

 

LAN port (12)

 

 

 

 

 

 

COMPONENT

 

 

 

 

LAN

Used for Ethernet

Y R

 

 

 

input/output.

VIDEO ports (13)

 

 

 

This port is used

 

 

AUDIO IN3

 

 

 

Y

 

 

 

RGB IN1

RGB IN2 RGB OUT AUDIO OUT

when utilizing

CB/PB

CB/PB

L

 

AUDIO IN1

 

network functions.

CR/PR

 

AUDIO IN2

 

 

CR/PR

 

USB

AUDIO OUT port

 

 

 

K

VIDEO port (13)

 

 

 

CONTROL

(12)

VIDEO

 

 

 

 

 

 

 

 

 

 

 

S-VIDEO

 

 

 

Ports

S-VIDEOport (13)

 

 

 

 

 

 

 

 

 

RGB OUT port (12)

AUDIO IN2 port (12)

 

 

 

 

 

 

USB port (12)

(In the default setting, the AUDIO

 

 

IN2 port is the audio port for

 

 

CONTROL port (12)

 

the RGB IN2 port, however, it is

 

 

 

possible to change the settings.

Kensington lock slot

 

36)

 

 

 

 

NOTE (*) About Restart switch: This projector is controlled by an internal microprocessor. Under certain exceptional circumstances, the projector may not operate correctly and the microprocessor will need to be reset. In such a case, please push the Restart switch by using a cocktail stick or similar, and before turning on again, make the projector cool down at least 10 minutes without operating. Only push the Restart switch in these exceptional instances.

Part names

Control buttons

Cursor buttons

▲,▼,◄,► (24)

STANDBY/ON button (17)

Remote control

LAMP indicator (60, 61)TEMP indicator (60, 61)POWER indicator (17, 60, 61)

INPUT button (18)

SEARCH button (19) RGB button (18) VIDEO button (19) ASPECT button (19) HOME button (23)

MAGNIFY

ON button (21) OFF button (21)

END button (23)

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

OFF

END

PAGE DOWN

MUTE

 

 

 

FREEZE

MY BUTTON

KEYSTONE

 

1

2

 

FREEZE button (22)

POSITION

MENU

POSITION button (20)

 

ENTER

ESC button (23)

ESC

RESET

Battery cover (15)(on the back)

STANDBY/ON button (17) AUTO button (20) BLANK button (22)

PAGE UP button (23) VOLUME button (18)

MUTE button (18) PAGE DOWN button (23)

KEYSTONE button (21) MY BUTTON button (41)

MENU button (24)

Cursor buttons

▲,▼,◄,► (24) ENTER button (24) RESET button (24)

Setting up

Setting up

WARNING ►Place the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. Then using damaged projector could result in a fire and/or an electric shock.

Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand.

Do not place the projector in the side/front/rear-upposition, except cleaning the air filter.

►Place the projector in a cool place, and pay attention enough to ventilation. The high temperature of the projector could cause a fire, a burn and/or malfunction to the projector.

Do not stop up, block and cover the projector's vents.

Keep a space of 30 cm or more between the sides and other objects such as walls.

Do not place the projector on a metallic thing or anything weak in heat.

Do not place the projector on a carpet, cushion or bedding.

Do not place the projector in direct sunlight or near a hot object such as a heater.

Put nothing about lens and vents of the projector. Put nothing on the projector.

Put nothing that is sucked or sticks to the bottom of projector. This projector has some intake vents also on the bottom.

►Do not place the projector on the place that gets wet. Damping the projector or inserting liquid in the projector could cause a fire, an electric shock and/or malfunction to the projector.

Do not place the projector in a bathroom or the outdoors.

Put nothing containing the liquid near the projector.

CAUTION ►Avoid a smoky, humid or dusty place. Placing the projector in such place could cause a fire, an electric shock and/or malfunction to the projector.

• Do not place the projector near a humidifier, a smoking space or a kitchen. ►Adjust the position of the projector to prevent any strong light, like direct sunlight or inverter fluorescent lamp light, from hitting the projector's remote sensor.

Setting up

Arrangement

Refer to the illustrations and tables below to determine the screen size and projection distance.

The values shown in the table are calculated for a full size screen: 1024×768

(a) The screen size (diagonal) (b)

(b) Distance from the projector to the screen (±10%)

(c) The height of the screen (±10%)

4:3

16:9

(c) up

 

(a)

(a)

(c) down

 

 

(a) Screen

 

 

 

 

4 : 3 screen

 

 

 

 

 

 

16 : 9 screen

 

 

size

 

(b) Projection distance

 

(c) Screen height

 

(b) Projection distance

(c) Screen height

 

 

[m (inch)]

 

 

 

[cm (inch)]

 

 

 

[m (inch)]

 

 

[cm (inch)]

 

[inch (m)]

 

 

 

 

 

 

 

 

 

 

 

 

min.

max.

down

up

 

min.

max.

down

up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30

(0.8)

0.9

(34)

1.1

(41)

5

(2)

41

(16)

 

1.0

(38)

1.1

(45)

-1

(0)

39

(15)

40

(1.0)

1.2

(46)

1.4

(56)

6

(2)

55

(22)

 

1.3

(50)

1.5

(61)

-2

(-1)

51

(20)

50

(1.3)

 

1.5

(58)

1.8

 

(70)

8

(3)

69

(27)

 

1.6

(63)

1.9

(76)

-2

(-1)

64

(25)

60

(1.5)

 

1.8

(70)

2.1

 

(84)

9

(4)

82

(32)

 

1.9

(76)

2.3

(91)

-2

(-1)

77

(30)

70

(1.8)

 

2.1

(81)

2.5

 

(98)

11

(4)

96

(38)

 

2.3

(89)

2.7

(107)

-3

(-1)

90

(35)

80

(2.0)

 

2.4

(93)

2.8

 

(112)

12

(5)

110

(43)

 

2.6

(102)

3.1

(122)

-3

(-1)

103

(41)

90

(2.3)

 

2.7

(105)

3.2

 

(126)

14

(5)

123

(49)

 

2.9

(115)

3.5

(138)

-4

(-1)

116

(46)

100

(2.5)

 

3.0

(117)

3.6

 

(140)

15

(6)

137

(54)

 

3.2

(127)

3.9

(153)

-4

(-2)

129

(51)

120

(3.0)

 

3.6

(140)

4.3

 

(169)

18

(7)

165

(65)

 

3.9

(153)

4.7

(184)

-5

(-2)

154

(61)

150

(3.8)

 

4.5

(176)

5.4

 

(211)

23

(9)

206

(81)

 

4.9

(192)

5.8

(230)

-6

(-2)

193

(76)

200

(5.1)

 

6.0

(235)

7.2

 

(282)

30

(12)

274

(108)

 

6.5

(256)

7.8

(307)

-8

(-3)

257

(101)

250

(6.4)

 

7.5

(294)

9.0

 

(353)

38

(15)

343

(135)

 

8.1

(320)

9.8

(384)

-10

(-4)

322

(127)

300 (7.6) 9.0 (352) 10.8 (423) 46 (18) 411 (162) 9.8 (384) 11.7 (461) -12(-5)386 (152)

Setting up

Adjusting the projector's elevator

CAUTION ►If you press the elevator button without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet.

►Do not incline the projector rightward or leftward. Also do not incline it backward or forward exceeding 30 degrees. Exceeding these range could cause malfunction, and could shorten the lifetime of the consumables.

►Except for inclining by the elevator feet adjustment, place the projector horizontally.

You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.

Elevator feet Elevator button

1. After making sure that the projector is cool adequately, press and hold in the elevator buttons while holding the projector.

The elevator buttons and the elevator feet are on the both sides.

2. Raise or lower the projector to the desired height and release the elevator buttons.

When you release the elevator buttons, the elevator feet will lock into position.

3. If necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand.

Setting up

Using the Security Bar

WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or injury.

CAUTION ►The security bar is not a comprehensive theft prevention measure. It is intended to be used as an extra theft prevention measure.

A commercial anti-theftchain or wire can be attached to the security bar on the projector.

1. How to attach

An anti-theftchain or wire can be attached as shown in the illustration.(Anti-theftchains or wires of up to 10mm in diameter can be used)

 

LAN

 

T

 

O OU

T

AUDI

B OU

 

RG

 

 

 

 

 

 

IN2

 

 

 

 

 

 

RGB

 

 

 

 

B

IN1

OL

B

 

 

RG

 

1

R

 

 

R

O IN

CONT

 

Y

 

AUDI

 

 

 

 

 

2

 

 

 

 

 

 

O IN

 

 

 

 

 

 

AUDI

 

 

 

 

B

L

 

 

 

 

 

CB/P

 

 

 

 

 

 

R

 

 

 

 

 

 

R/P

O

 

 

 

 

 

C

 

 

 

 

 

VIDE

 

 

 

 

 

 

DEO

 

 

 

 

 

S-VI

 

 

 

 

 

 

Security Bar

Anti-theftchain or wire [sold separately]

10

Setting up

Connecting your devices

CAUTION ►Turn off all devices prior to connecting them to the projector.

Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector.

►Use the accessory cable or a designated-typecable for the connection.

Some cables have to be used with core set. A too long cable may cause a certain picture degradation. Please consult with your dealer for details. For cables that have a core only at one end, connect the core to the projector.

►Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

NOTE • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

Secure the screws on the connectors and tighten.

Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

For some RGB signal modes, the optional Mac adapter is necessary.

When the image resolution is changed on a computer, depending on an input, automatic adjustment function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original. It might be recommended to use other CRT or LCD monitors to change the resolution.

About Plug-and-Playcapability

Plug-and-Playis a system composed of the computer, its operating system and peripheral equipment (i.e. display devices). This projector is compatible with VESA DDC 2B.Plug-and-Playcan be achieved by connecting this projector to a computer is VESA DDC (display data channel) compatible.

Please take advantage of this function by connecting the accessory RGB cable to the RGB IN1 port (DDC 2B compatible). Plug-and-Playmay not work properly if any other type of connection is attempted.

Please use the standard drivers in your computer as this projector is a Plug-and-Playmonitor.

11

Setting up

Examples of connection with a computer

* In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1, and the AUDIO IN2 port is the audio port for the RGB IN2 ports. To change the settings, refer to the AUDIO item in the SETUP menu. (36)

RGB cable

 

 

 

USB cable

 

 

 

 

 

LAN

Y

AUDIO IN3

 

 

R

 

 

 

 

RGB IN1

RGB IN2 RGB OUT AUDIO OUT

CB/PB

L

AUDIO IN1

 

RGB out Audio out RS-232CUSBCR/PR

IN2

 

 

 

 

 

 

VIDEO

 

K

USB

 

 

 

S-VIDEO

 

 

Stereo mini

RS-232Ccable

audio cable

 

 

Stereo mini audio cable

RGB out

Audio out

LAN

AUDIO IN

Y R

 

 

 

RGB IN1

RGB IN2

RGB OUT

AUDIO OUT

 

CB/PB

L

AUDIO IN1

 

 

 

 

 

AUDIO IN2

 

 

 

 

CR/PR

 

 

 

 

 

 

K

CONTROL

USB

 

 

VIDEO

 

 

 

 

 

 

 

 

 

RGB cable

S-VIDEO

 

 

 

 

 

 

 

 

 

 

Connecting to a monitor (output) and a speaker with amplitier (output)

RGB in

Audio in

RGB cable

 

 

 

 

LAN

Y

AUDIO IN3

 

 

R

 

 

 

 

 

RGB IN1

RGB IN2

RGB OUT

 

 

 

 

RGB OUT AUDIO OUT

CB/PB

L

AUDIO IN1

 

 

 

AUDIO IN2

 

 

CR/PR

 

 

 

 

K

CONTROL

 

VIDEO

 

 

 

 

 

 

 

S-VIDEO

 

 

 

Stereo mini audio cable

Connecting to a Network

LAN

AUDIO IN3

Y R

LAN

CB/PBL

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

AUDIO IN1

 

 

 

 

 

 

 

CR/PR

AUDIO IN2

 

 

 

K

CONTROL

USB

 

VIDEO

 

LAN cable

 

 

 

S-VIDEO

 

 

 

(CAT-5cable)

 

 

 

 

CAUTION ►For safety, do not connect LAN port to any network that might have the excessive voltage.

12

Setting up

Examples of connection with a VCR/DVD player

* In the default setting, the AUDIO IN3 L/R port is the audio port for the VIDEO, S-VIDEO

and COMPONENT VIDEO ports. To change the settings, refer to the AUDIO item in the SETUP menu. (36)

Audio/Video cable

Audio (R) out

Audio (L) out

Video out

Audio cable

 

 

 

LAN

Y

AUDIO IN3

 

 

R

 

 

 

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

CB/PB

AUDIO IN1

 

 

 

AUDIO IN2

 

 

CR/PR

K

CONTROL

USB

 

 

VIDEO

S-VIDEO

LAN

Audio (R) out

Audio (L) out

S-Videoout

Y

AUDIO IN3

 

 

 

R

 

 

 

 

 

 

RGB IN1

RGB IN2

RGB OUT

AUDIO OUT

CB/PB

L

AUDIO IN1

 

 

 

 

AUDIO IN2

 

 

 

 

 

 

 

 

CR/PR

 

K

CONTROL

USB

 

VIDEO

 

 

 

 

 

 

 

 

S

S-Videocable

Component video out

Component video cable

 

 

LAN

Y

 

 

 

 

 

 

 

 

 

IN3

 

 

 

 

Y

R

 

 

 

 

 

 

 

 

CB/PB

 

 

RGB IN1

RGB IN2

RGB OUT

AUDIO OUT

 

CB/PB

L

AUDIO IN1

 

 

 

CR/PR

CR/PR

AUDIO IN2

CONTROL

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

 

K

 

USB

 

Audio (R) out

 

 

 

 

 

S-VIDEO

 

 

 

 

 

 

 

 

 

Audio (L) out

Audio cable

 

 

 

SCART cable

G

 

B

 

R

SCART

Video

out

 

Y

AUDIO IN3

R

 

 

 

RGB IN1

CB/PB

L

AUDIO IN1

 

AUDIO IN2

 

 

CR/PR

 

K

VIDEO

 

 

 

Note: Only the RJ has the LAN connector port.

LAN

RGB IN2

RGB OUT AUDIO OUT

CONTROL

USB

13

Setting up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.

Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

Only plug the power cord into an outlet rated for use with the power cord's specified voltage range.

Never modify the power cord. Never attempt to defeat the ground connection of the three-prongedplug.

C/P

C /P

VIDEO S-VIDEO

 

A

RGB

IN1

A

UDIO

UDIO IN2

IN1

 

 

 

RGB IN2

 

 

 

CO

 

 

 

NTROL

LAN

RGBOUT AUDIO OUT USB

AC inlet

AC

IN

 

Connector

of the power cord

1.

2.

Connect the connector of the power cord to the AC inlet of the projector.

Firmly plug the power cord's plug into the outlet.

14

Remote control

Remote control

Putting batteries

WARNING ►Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

And also improper use may result in cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

Make sure the plus and minus terminals are correctly aligned when loading a battery.

Keep a battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

Do not short circuit or solder a battery.

Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

If you observe a leakage of a battery, wipe out the flower and then replace a battery.

If the liquid adheres to your body or clothes, rinse well with water immediately.

Obey the local laws on disposing the battery.

1. Remove the battery cover.

Slide back and remove the battery cover in the direction of the arrow.

2. Insert the batteries.

Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control.

3. Close the battery cover.

Replace the battery cover in the direction of the arrow and snap it back into place.

15

Remote control

Using the remote control

CAUTION ►Be careful in handling the remote control.

Do not drop or expose the remote control to physical impact.

Do not get the remote control wet or place it on wet objects. It may result in malfunction.

Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period.

Replace the batteries whenever the remote control starts malfunctioning.

When strong lights (such as direct sunlight) or light from an extremely close range (such as from an inverter fluorescent lamp), hit the projector’s remote sensor, the remote control may cause to function. Adjust the direction of the projector to keep the light from directly hitting the projector’s remote sensor.

The signal settings for the remote control transmitter and the projector's remote sensor can be changed. If the remote control does not function properly try changing the signal setting.

Changing the signal setting for the remote control transmitter

(1)Setting 1 (FREQ. : NORMAL)

Simultaneously press and hold the MUTE and RESET buttons for about 3 seconds. (2)Setting 2 (FREQ. : HIGH)

Simultaneously press and hold the MAGNIFY OFF and ESC buttons for about 3 seconds.

Setting 1 is the factory default setting.

When the batteries are removed from the remote control, user-specifiedsettings are saved for about half a day. If the batteries are removed from the remote control for longer than half a day, the remote will reset to Setting 1.

Changing the signal setting for the projector's remote sensor

Switch between Setting 1 and 2 using the SERVICE/REMOTE FREQ. item found in OPTION MENU. (43)

If the remote control does not seem to function properly, try changing the settings for the remote control and the projector's remote sensor.

The remote control will not function properly if the remote control transmitter settings and the projector's remote sensor settings are not the same.

The remote control works with the projector’s remote sensor.

30º

approx. 3 meters

30º

 

The range of the remote sensor is 3 meters with a 60 degree range (30 degrees to the left and right of the remote sensor).

Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a remote signal to the sensor directly, please try to use the reflected signal.

Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control’s output signal to the projector.

16

POWER
(Blinking in orange)
POWER
(Steady orange)
17

Power on/off

Power on/off

WARNING ►When the power is on, a strong light is emitted. Do not look into the lens of projector. Also do not peep at the inside of projector through a hole.

NOTE • Turn the power on/off in right order. Please power on the projector prior to the connected devices. Power off the projector later than the connected devices.

Turning on the power

1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet.

2. Remove the lens cover, and set the power switch to the ON position.

The power indicator will light up in steady orange. Then wait several seconds because the buttons may not function for these several seconds.

STANDBY/ON button

(1)When AUTO ON in the OPTION menu is set to TURN ON:(40) The lamp will only be automatically turned on when the Power switch is turned on after the power was turned off by Power switch last time. Afterwards the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in green.

(2)When AUTO ON in the OPTION menu is set to TURN OFF please see step 3.

3.Press the STANDBY/ON button on the projector or the remote control.

To display the picture, select an input signal according to the section "Selecting an input signal" (18).

POWER indicator

POWER

(Steady orange)

POWER

(Blinking in green)

POWER

(Steady green)

Turning off the power

Please pay special attention to below two points when you do:

(1)Please do not turn the projector on again for at least 10 minute in this case. Neglect could shorten the lifetime of the lamp.

(2)During use or immediately after use, do not touch around the lamp and vents of the 1.projector (4 ê) It could cause a burn. Power off?Press the STANDBY/ON button on the projector or the remotecontrol.

The message "Power off?" will appear on the screen for about 5 seconds.

2. Press the STANDBY/ON button on the projector or the remote control again while the message appears.

The projector lamp will go off, and the POWER indicator will begin blinking in orange.

Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.

3. Make sure that the power indicator lights in steady orange, and set the power switch to the OFF position. The POWER indicator will go

off. Attach the lens cover.

1.
2.

Operating

Operating

Adjusting the volume

Press the VOLUME button on the remote control.

A dialog will appear on the screen to aid you in adjusting the volume.

Use the cursor buttons ▲/▼ to adjust the volume.

To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

Temporarily muting the sound

1. Press the MUTE button on the remote control.

A dialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE or VOLUME button. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

END

PAGE DOWN

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

OFF

END

PAGE DOWN

MUTE

 

 

 

FREEZE

MY BUTTON

 

 

1

2

 

Selecting an input signal

1. Press the INPUT button on the projector.

Each time you press the button, the projector switches its input port as below.

RGB IN1 RGB IN2

VIDEO S-VIDEOCOMPONENT VIDEO

1. Press the RGB button on the remote control to select an input port for the RGB signal.

Each time you press the button, the projector switches its RGB input port as below.

VIDEO

RGB SEARCH

ASPECT

AUTO BLANK

RGB IN1 RGB IN2

If the RGB button is pushed (when switching from VIDEO to RGB signals) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the RGB IN1 port first. If no input is detected at the port, the projector will check the RGB IN2 port.

18

Operating

Selecting an input signal (continued)

1. Press the VIDEO button on the remote control to select an input for video signal.

Each time you press the button, the projector switches its video input port as below.

COMPONENT VIDEO S-VIDEOVIDEO

VIDEO RGB SEARCH

AUTO BLANK

If the VIDEO button is pushed (when switching from RGB to VIDEO signals) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the COMPONENT VIDEO port first. If no input is detected at the port, projector will begin to check other ports in above order.

Searching an input signal

1.

Press the SEARCH button on the remote control.

VIDEO

RGB SEARCH

 

The projector will start to check its input ports in order to

ASPECT

BLANK

find any input signals.

When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.

RGB IN 1 RGB IN 2COMPONENT VIDEOS-VIDEOVIDEO

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect ratio in turn.

For an RGB signal

NORMAL 4:316:9SMALL

For a video signal, s-videosignal or component video signal

4:3 16:914:9SMALL

VIDEO

RGB SEARCH

ASPECT

AUTO BLANK

ON

HOME

PAGE UP VOLUME

 

 

For a no signal

4:3 (fixed)

The NORMAL mode keeps the original aspect ratio of the signal.

Performing the automatic adjustment initializes the aspect ratio setting.

Adjusting the zoom and focus

Focus ring

Zoom ring

1.

Use the zoom ring to adjust the screen size.

 

 

 

2.

Use the focus ring to focus the picture.

 

 

19

AUTO BLANK
VOLUME

Operating

Using the automatic adjustment feature

1. Press the AUTO button on the remote control.

VIDEO RGB SEARCH

For an RGB signal

ASPECT

The vertical position, the horizontal position, the horizontal

phase and the horizontal size will be automatically adjusted. ON MAGNIFY HOME

And the aspect ratio will be automatically set to default. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.

For a video signal or s-videosignal

The video format best suited for the respective input signal will be selected automatically.

This function is available only when the AUTO mode is selected to the VIDEO FORMAT item in the INPUT menu (33). For a component video signal, the signal type is identified automatically independently of this function.

For a video signal, s-videosignal or component video signal

The vertical position, horizontal position and aspect ratio will be automatically set to default.

For a component video signal

The horizontal phase will be automatically set to default.

The automatic adjustment operation requires about 10 seconds. Also please note that it may not function correctly with some input.

Adjusting the position

1. Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen.

2. Use the cursor buttons ▲/▼/◄/► to adjust the picture position.

OFF

 

 

FREEZE

MY BUTTON

KEYSTONE

 

1

2

POSITION

 

MENU

When you want to reset the operation, press the RESET button on the remote control during the operation.

To complete this operation, press the POSITION button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

When this function is performed at a video signal, a certain extra such as a line may appear outside a picture.

20

Correcting the keystone distortions

1.

Press the KEYSTONE button on the

 

 

 

-';5610'

 

 

 

remote control. A dialog will appear on the

 

 

 

#761

 

':'%76'

 

 

screen to aid you in correcting the distortion. /#07#.

 

 

 

 

2. Use the cursor buttons ▲/▼ to select

AUTO or MANUAL operation, and press the button ► to perform the following.

1)AUTO executes automatic vertical keystone correction.

2)MANUAL displays a dialog for vertical keystone correction.

Use the buttons ▲/▼ for adjustment.

To close the dialog and complete this operation, press the KEYSTONE button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

Operating

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

OFF

END

PAGE DOWN

MUTE

 

 

 

FREEZE

MY BUTTON

KEYSTONE

 

1

2

 

-';5610'

The adjustable range for correction will vary among inputs. For some input, this function may not work well.

When V:INVERT or H&V:INVERT is selected to the MIRROR item in the

SETUP menu, if the projector screen is inclined or angled downward, the Auto Keystone function may not work correctly.

When the zoom adjustment is set to the TELE (telephoto focus), this correction may be excessive. This function should be used when the zoom adjustment is set to the WIDE (wide-anglefocus) whenever possible.

When vertical degree is almost 0 degree, the automatic keystone distortion correction may not work.

When vertical degree is almost ±30 degree, the automatic keystone distortion correction may not work well.

This function will be unavailable when Transition Detector is on (48).

Using the magnify feature

1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen

(although the indication will disappear in several seconds with no operation), and the projector will enter the MAGNIFY mode.

 

VIDEO RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

 

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

 

 

 

END

PAGE DOWN

MUTE

2. Use the cursor buttons ▲/▼ to adjust the zoom level.

To move the zoom area, press the POSITION button in the MAGNIFY mode, then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the zoom area, press the POSITION button again.

To exit the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control.

The projector automatically exits the MAGNIFY mode when the input signal is changed, or when the display condition is changed.

Although in the MAGNIFY mode, the keystone distortion condition may vary, it

will be restored when the projector exits the MAGNIFY mode.

21

 

Operating

Freezing the screen

1. Press the FREEZE button on the remote control.

The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode.

To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

OFF

END

PAGE DOWN

MUTE

 

 

 

FREEZE

MY BUTTON

KEYSTONE

 

1

2

 

The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, MUTE, KEYSTONE, POSITION, MENU, MAGNIFY and MY BUTTON is pressed.

If the projector continues projecting a still image for a long time, the LCD panel might possibly be printed. Do not leave the projector in the FREEZE mode for too long.

Temporarily blanking the screen

1. Press the BLANK button on the remote control.

The blank screen will be displayed instead of the screen of input signal. Please refer to the BLANK item in the SCREEN menu (37).

 

VIDEO RGB

SEARCH

ASPECT

 

AUTO BLANK

 

MAGNIFY

HOME

PAGE UP

ON

 

 

 

 

To exit the blank screen and return to the input signal screen, press the BLANK button again.

The projector automatically returns to the input signal screen when one of the projector’s buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted from the control port.

22

Operating

Operating the computer screen

CAUTION ►Mistaken use of the mouse/keyboard control could damage your equipment.

While using this function, please connect only with a computer.

Before connecting, read the manuals of the computer you will connect.

NOTE • It may not be possible to control notebook PC, and other computers withbuilt-inpointing device (e.g. track ball), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing device. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

The USB control can be used only for the functions listed below. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

This function is not available while the lamp is warming up (the POWER indicator flashes green), and while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.

USB mouse and keyboard control

1. Connect the projector’s USB port to the computer via the mouse cable.

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

OFF

END

PAGE DOWN

MUTE

 

 

 

FREEZE

MY BUTTON

KEYSTONE

 

1

2

 

POSITION

 

 

MENU

 

ENTER

 

ESC

 

 

RESET

Available function

Remote control operation

 

 

Move pointer

Use ▲, ▼, ◄, ► buttons

Left click with mouse

Press ENTER button

Right click with mouse

Press RESET button

Press keyboard’s HOME key

Press HOME button

Press keyboard’s END key

Press END button

Press keyboard’s PAGE UP key

Press PAGE UP button

Press keyboard’s PAGE DOWN key

Press PAGE DOWN button

Press keyboard’s ESC key

Press ESC button

23

Multifunctional settings

Multifunctionalsettings

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, NETWORK, and EASY MENU. EASY MENU consists of functions often used, and the other menus are classified into each purpose. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.

MENU buttonENTER buttonCursor buttons

RESET button

 

 

SEARCH

 

 

 

AUTO

BLANK

POSITION

MENU

PAGE UP

VOLUME

 

 

PAGE DOWN

MUTE

 

ENTER

BUTTON1 2 KEYSTONE

 

 

 

 

 

 

MENU

ESC

RESET

 

 

 

 

ENTER

 

RESET

1. Press the MENU button on the remote control or one of the cursor buttons on the projector.

The Advanced MENU or EASY MENU will appear.

In the EASY MENU

2. If you want to change it to the Advanced MENU, select the "Go to Advanced Menu"

3. Use the cursor buttons ▲/▼ to select an item to operate.4. Use the cursor buttons◄/► to operate the item.

In the Advanced MENU

2. Use the cursor buttons ▲/▼ to select a menu.

If you want to change it to the EASY MENU, select the EASY MENU.

Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to select an item. The display of the selected menu will be active.

/'07 =4)$ ?

 

5'.'%6

2+%674'

 

 

 

$4+)*60'55

 

+/#)'

%1064#56

 

+0276

)#//#

&'(#7.6

5'672

%1.14 6'/2

/+&&.'

5%4''0

%1.14

 

126+10

6+06

 

0'6914-

5*#420'55

'#5; /'07

/; /'/14; 5#8'

'#5; /'07 =4)$ ?

 

#52'%6

#761 -';5610'

':'%76'

 

 

-';5610'

 

2+%674' /1&'

014/#.

$4+)*60'55

 

 

%1064#56

 

%1.14

 

6+06

 

5*#420'55

 

9*+52'4

014/#.

/+4414

014/#.

4'5'6

 

(+.6'4 6+/'

J

.#0)7#)'

'0).+5*

)Q VQ #FXCPEGF /GPW

3. Use the cursor buttons ▲/▼ to select an item to operate.

Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear.

4. Use the cursor buttons▲/▼ to operate the item.

When you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.

In the advanced menu, when you want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control.

5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you don't do anything, the dialog will

automatically disappear after about 10 seconds.

Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed.

24

EASY Menu

With the EASY MENU, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

EASY Menu

'#5; /'07 =4)$ ?

 

#52'%6

#761 -';5610'

':'%76'

 

 

-';5610'

 

2+%674' /1&'

014/#.

$4+)*60'55

 

 

%1064#56

 

%1.14

 

6+06

 

5*#420'55

 

9*+52'4

014/#.

/+4414

014/#.

4'5'6

 

(+.6'4 6+/'

J

.#0)7#)'

'0).+5*

)Q VQ #FXCPEGF /GPW

Item

Description

ASPECT

Using the buttons ◄/► switches the mode for aspect ratio.

See the ASPECT item in the IMAGE menu (30).

 

AUTO

Using the button ► executes the auto keystone function.

KEYSTONE

See the AUTO KEYSTONE EXECUTE item in the SETUP menu (35).

EXECUTE

This function will be unavailable when Transition Detector is on (48).

 

Using the buttons ◄/► corrects the keystone distortion.

KEYSTONE

See the item KEYSTONE of section SETUP menu. (35)

 

This function will be unavailable when Transition Detector is on (48).

 

Using the buttons ◄/► switches the mode of picture type. The

 

modes of picture type are combinations of a mode of GAMMA and

 

a mode of COLOR TEMP. Choose a suitable mode according to the

 

projected source.

 

NORMAL ó CINEMAó DYNAMIC

 

WHITEBOARD ó BOARD(GREEN)ó BOARD(BLACK)

 

NORMAL: (COLOR TEMP = MID DEFAULT) + (GAMMA = #1 DEFAULT)

 

CINEMA: (COLOR TEMP = LOW DEFAULT) + (GAMMA = #2 DEFAULT)

PICTURE MODE

DYNAMIC: (COLOR TEMP = HIGH DEFAULT) + (GAMMA = #3 DEFAULT)

BOARD(BLACK): (COLOR TEMP = Hi-BRIGHT-1DEFAULT) +

 

(GAMMA = #4 DEFAULT)

 

BOARD(GREEN): (COLOR TEMP = Hi-BRIGHT-2DEFAULT) +

 

(GAMMA = #4 DEFAULT)

 

WHITEBOARD: (COLOR TEMP = MID DEFAULT) + (GAMMA = #5

 

DEFAULT)

 

• When the combination of GAMMA and COLOR TEMP differs

 

from pre-assignedmodes above, the display on the menu for the

 

PICTURE MODE is “CUSTOM”. Please refer to the GAMMA (27)

 

and COLOR TEMP (28) items in the PICTURE menu.

 

• When this function is performed, a certain extra such as a line may appear.

BRIGHTNESS

Using the buttons ◄/► adjusts the brightness.

See the item BRIGHTNESS in the PICTURE menu (27).

 

25

EASY Menu

EASY Menu (continued)

Item

Description

CONTRAST

Using the buttons ◄/► adjusts the contrast.

See the CONTRAST item in the PICTURE menu (27).

 

COLOR

Using the buttons ◄/► adjusts the strength of whole color.

See the COLOR item in the PICTURE menu (28).

 

TINT

Using the buttons ◄/► adjusts the tint.

See the TINT item in the PICTURE menu (28).

 

 

Using the buttons ◄/► adjusts the sharpness.

SHARPNESS

See the SHARPNESS item in the PICTURE menu (28).

• There may be some noise when an adjustment is made. This is

 

 

not a malfunction.

WHISPER

Using the buttons ◄/► turns off/on the whisper mode.

See the WHISPER item in the SETUP menu (35).

 

 

Using the buttons ◄/► switches the mode for mirror status.

MIRROR

See the MIRROR item in the SETUP menu (36).

If Transition Detector is TURN ON and MIRROR status is changed,

 

Transition Detector Alarm (48) will be displayed when projector is

 

restarted after the power switch is turned off.

 

Performing this item resets all of the items of EASY MENU except

RESET

FILTER TIME and LANGUAGE.

A dialog is displayed for confirmation. Selecting RESET using the

 

 

button ▲ performs resetting.

 

Performing this item resets the filter timer which counts usage time

 

of the air filter.

FILTER TIME

A dialog is displayed for confirmation. Selecting RESET using the

 

button ▲ performs resetting.

 

See the FILTER TIME item in the OPTION menu (41).

 

Using the buttons ◄/► selects the LANGUAGE item to toggle

LANGUAGE

the menu language. Refer to description of LANGUAGE in the

 

SCREEN menu (37).

Go to

Select “Go to Advanced Menu” and press the button ► or the

ENTER button to use the menu of PICTURE, IMAGE, INPUT,

Advanced Menu

SETUP, SCREEN, OPTION or NETWORK.

 

26

PICTURE Menu

PICTUREMenu

With the PICTURE menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

/'07 =4)$ ?

 

5'.'%6

2+%674'

 

 

 

$4+)*60'55

+/#)'

%1064#56

 

+0276

)#//#

&'(#7.6

5'672

%1.14 6'/2

/+&&.'

5%4''0

%1.14

 

126+10

6+06

 

0'6914-

5*#420'55

'#5; /'07

/; /'/14; 5#8'

Item

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BRIGHTNESS

Using the buttons ▲/▼ adjusts the brightness. :

 

 

Light ó Dark

 

 

 

CONTRAST

Using the buttons ▲/▼ adjusts the contrast. :

Strong ó Weak

 

Using the buttons ▲/▼ switches the GAMMA mode.

 

 

 

 

 

 

 

 

 

#1 DEFAULT ó#1 CUSTOMó#2 DEFAULTó#2 CUSTOMó#3 DEFAULT

 

 

#5 CUSTOM ó#5 DEFAULTó#4 CUSTOMó#4 DEFAULTó#3 CUSTOM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To adjust CUSTOM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selecting a mode of CUSTOM and then

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressing the button ► or the ENTER button

 

 

 

 

 

 

ENTER :

 

 

 

 

 

 

 

 

 

 

 

 

 

 

displays a dialog to aid you in adjusting the

 

 

1 2 3 4

5 6 7

8

 

 

 

mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This function is useful when you want to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

change the brightness of particular tones.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Choose an item using the buttons ◄/►, and

+0 +0 +0 +0

+0 +0 +0

+0

 

 

 

 

 

 

GAMMA [CUSTOM 1]

 

 

 

 

adjust the level using the buttons ▲/▼.

 

 

 

 

 

 

 

GAMMA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can display a test pattern for checking the effect of your

 

 

 

 

 

 

 

 

adjustment by pressing the ENTER button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Each time you press the ENTER button, the pattern changes as

 

 

 

 

below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No pattern ð Gray scale of 9 steps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ramp Gray scale of 15 steps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The eight equalizing bars correspond to eight tone levels of the test

 

pattern except the darkest in the left end. If you want to adjust the

 

2nd tone from left end on the test pattern (Gray scale of 9 steps),

 

use the equalizing adjustment bar “1”. The darkest tone at the left

 

end of the test pattern cannot be controlled with any of equalizing

 

adjustment bar.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• When this function is performed, a certain extra such as a line

 

 

 

 

may appear.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27

PICTURE Menu

PICTURE Menu (continued)

Item

Description

 

 

 

Using the buttons ▲/▼ switches the mode of color temperature.

 

To adjust CUSTOM

 

 

 

 

 

 

 

 

 

 

 

 

 

Selecting the CUSTOM and then pressing the

 

 

 

 

 

ENTER :

 

 

 

button ► or the ENTER button displays a dialog

 

 

 

 

 

 

 

 

 

OFFSET

 

GAIN

 

 

 

to aid you in adjusting the OFFSET and/or GAIN

R G B

R G B

 

 

 

 

 

 

 

 

 

 

 

 

 

of the CUSTOM mode.

 

 

 

 

 

 

 

 

 

 

 

 

OFFSET adjustments change the color intensity

 

 

 

 

 

 

 

 

 

 

 

COLOR TEMP

on the whole tones of the test pattern.

+0

+0 +0

+0 +0 +0

 

 

 

GAIN adjustments mainly affect color intensity

 

COLOR TEMP [CUSTOM-1]

 

 

 

 

 

 

 

 

 

 

 

 

 

on the brighter tones of the test pattern.

 

 

 

 

 

 

 

 

 

 

 

 

Choose an item using the buttons ◄/►, and adjust the level using

 

the buttons ▲/▼.

 

 

 

 

 

 

 

 

 

 

 

 

You can display a test pattern for checking the effect of your

 

adjustment by pressing the ENTER button.

 

 

 

 

 

 

 

 

 

 

 

 

Each time you press the ENTER button, the pattern changes as

 

below.

 

 

 

 

 

 

 

 

 

 

 

 

No pattern ð Gray scale of 9 steps

 

 

 

 

 

 

 

 

 

 

 

 

Ramp Gray scale of 15 steps

 

 

 

 

 

 

 

 

 

 

 

 

• When this function is performed, a certain extra such as a line

 

may appear.

 

 

 

 

 

 

 

 

 

 

 

 

Using the buttons ▲/▼ adjusts the strength of whole color.

COLOR

Strong ó Weak

 

 

 

 

 

 

 

 

 

 

 

• This item can be selected only for a video signal, s-videoor

 

 

component video signal.

 

 

 

 

 

 

 

 

 

 

 

 

Using the buttons ▲/▼ adjusts the tint.

 

 

 

 

 

 

 

 

 

 

 

TINT

Greenish ó Redish

 

 

 

 

 

 

 

 

 

 

 

• This item can be selected only for a video signal, s-videoor

 

 

component video signal.

 

 

 

 

 

 

 

 

 

 

 

 

Using the buttons ▲/▼ adjusts the sharpness.

 

 

 

 

 

 

 

 

 

 

 

SHARPNESS

Strong ó Weak

 

 

 

 

 

 

 

 

 

 

 

• There may be some noise and/or the screen may flicker for a

 

 

moment when an adjustment is made. This is not a malfunction.

28

PICTURE Menu

PICTURE Menu (continued)

Item

 

Description

 

 

 

 

 

Selecting a mode of MY MEMORY using the buttons ▲/▼ and then

 

pressing the button ► or the ENTER button performs each function.

 

LOAD1 ó LOAD2ó LOAD3ó LOAD4

 

SAVE4 óSAVE3ó SAVE2ó SAVE1

 

This projector has 4 numbered memories for adjustment data.

 

Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on

 

the memory whose number corresponds to the command’s number,

 

and adjusts the picture automatically depending on the data.

 

Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current

 

adjustment data on the memory whose number corresponds to the

 

command’s number.

 

 

 

 

• The current adjustment data of the items in the PICTURE menu is

 

stored.

 

 

 

MY MEMORY

• There may be some noise and/or the screen may flicker for a

 

moment when data is loaded to memory. This is not a malfunction.

 

When the current settings are not saved to memory the following

 

dialog is displayed.

 

 

 

 

 

6GORQTCT[ EQPFKVKQP

 

 

 

 

/'/14; 4GECNN UCXGF RCTCOGVGTU

 

 

 

 

3WKV

 

 

 

 

 

 

To load saved adjustment settings press the MY BUTTON button. When there are no saved adjustment settings the following dialog is displayed.

0Q UCXGF FCVC

~Note~

You have to assign the MY MEMORY function to the MY BUTTON (41).

29

IMAGE Menu

IMAGEMenu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

/'07 =4)$ ?

5'.'%6

 

 

2+%674'

#52'%6

+/#)'

18'4 5%#0

+0276

8 215+6+10

5'672

* 215+6+10

5%4''0

* 2*#5'

126+10

* 5+<'

0'6914-

#761 #&,756 ':'%76'

'#5; /'07

 

Item

Description

 

 

 

Using the buttons ▲/▼ switches the mode for aspect ratio.

 

For an RGB signal

 

NORMAL ó 4:3ó 16:9ó SMALL

ASPECT

For a video signal, s-videosignal or component video signal

4:3 ó 16:9ó 14:9ó SMALL

 

 

For a no signal

 

4:3 (fixed)

 

• The NORMAL mode keeps the original aspect ratio of the signal.

 

Using the buttons ▲/▼ adjusts the over-scanratio.

OVER SCAN

Large (It reduces picture) ó Small (It magnifies picture)

• This item can be selected only for a video, s-videoand component signal.

 

• When this adjustment is too large, certain degradation may appear

 

at the frame area of the picture. In such a case, please adjust small.

 

Using the buttons ▲/▼ adjusts the vertical position.

 

Up ó Down

 

Over-adjustingthe vertical position may cause noise to appear

V POSITION

on the screen. If this occurs please reset the vertical position to the

default setting. Pressing the RESET button when V POSITION is

 

selected will reset the V POSITION to the default setting.

 

For a video signal, s-videosignal or component video signal

 

The adjustable range of V.POSITION depends on the OVERSCAN setting.

 

It is not possible to adjust when the OVERSCAN is set to 10.

 

Using the buttons ▲/▼ adjusts the horizontal position.

 

Left ó Right

 

Over-adjustingthe horizontal position may cause noise to appear

H POSITION

on the screen. If this occurs please reset the horizontal position to

the default setting. Pressing the RESET button when H POSITION

 

is selected will reset the H POSITION to the default setting.

 

For a video signal, s-videosignal or component video signal

 

The adjustable range of H.POSITION depends on the OVERSCAN setting.

 

It is not possible to adjust when the OVERSCAN is set to 10.

 

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate flicker.

H PHASE

Right ó Left

• This item can be selected only for an RGB signal or a component

 

 

video signal.

30

IMAGE Menu

IMAGE Menu (continued)

Item

Description

 

 

 

Using the buttons ▲/▼ adjusts the horizontal size.

 

Large ó Small

H SIZE

• This item can be selected only for an RGB signal.

• When this adjustment is excessive, the picture may not be

 

 

displayed correctly. In such a case, please reset the adjustment

 

by pressing the RESET button on the remote control during this

 

operation.

 

Selecting this item performs the automatic adjustment feature.

 

For an RGB signal

 

The vertical position, the horizontal position, the horizontal phase

 

and the horizontal size will be automatically set to default. And the

 

aspect ratio will be automatically selected.

 

Make sure that the application window is set to its maximum size

 

prior to attempting to use this feature. A dark picture may still be

 

incorrectly adjusted. Use a bright picture when adjusting.

 

For a video signal or s-videosignal

AUTO ADJUST

The video format best suited for the respective input signal will be

selected automatically.

EXECUTE

This function is available only when the AUTO mode is selected to

 

the VIDEO FORMAT item in the INPUT menu. For a component

 

video signal, the signal type is identified automatically independently

 

of this function.

 

For a video signal, s-videosignal or component video signal

 

The vertical position, horizontal position and aspect ratio will be

 

automatically set to default.

 

For a component video signal

 

The horizontal phase will be automatically set to default.

 

• The automatic adjustment operation requires about 10 seconds.

 

Also please note that it may not function correctly with some input.

31

INPUT Menu

INPUTMenu

With the INPUT menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

/'07 =4)$ ?

5'.'%6

 

 

2+%674'

241)4'55+8' 68

+/#)'

8+&'1 04 /+&

+0276

%1.14 52#%' #761

5'672

%1/210'06 %1/210'06

5%4''0

8+&'1 (14/#6 #761

126+10

(4#/' .1%- 6740 10

0'6914-

4)$ +0

'#5; /'07

4'51.76+10

Item

Description

 

 

 

Using the buttons ▲/▼ switches the progress mode.

 

TV ó FILMó TURN OFF

 

• This function is performed only for an interlaced signal of a VIDEO

 

input, an S-VIDEOinput or COMPONENT VIDEO input of 525i (480i)

PROGRESSIVE

or 625i (576i) signal.

• When TV or FILM is selected, the screen image will be sharp.

 

 

FILM adapts to the 2-3Pull-Downconversion system. But these

 

may cause a certain defect (for example, jagged line) of the picture

 

for a quick moving object. In such a case, please select TURN OFF,

 

even though the screen image may lose the sharpness.

 

Using the buttons ▲/▼ switches the noise reduction mode.

 

HIGH ó MIDó LOW

VIDEO NR

• This function performs only at a VIDEO input, an S-VIDEOor

COMPONENT VIDEO input of 525i(480i) or 625i(576i) signal.

 

 

• When this function is excessive, it may cause a certain

 

degradation of the picture.

 

Using the buttons ▲/▼ switches the mode for color space.

 

AUTO ó RGBó SMPTE240ó REC709ó REC601

• This item can be selected only for an RGB signal or a component COLOR SPACE video signal (except signals of SCART RGB from the component

video port).

The AUTO mode automatically selects the optimum mode.

The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

32

INPUT Menu

INPUT Menu (continued)

Item

 

Description

 

 

 

 

 

Using the buttons ▲/▼ switches the function of COMPONENT

 

VIDEO port.

 

 

 

 

COMPONENT ó SCART RGB

 

 

COMPONENT

When the SCART RGB is selected, the COMPONENT VIDEO port

 

function as a port for a SCART RGB signal input and VIDEO port

 

function as a port for SCART RGB sync input. A SCART adapter

 

and SCART cable realize a SCART RGB input to the projector. For

 

details, contact your dealer.

 

 

 

Set the video format for the s-videoport and video port.

 

 

(1) Use the ◄/► buttons to select the input port.

8+&'1 (14/#6

 

(2) Using the buttons ▲/▼ switches the mode

5 8+&'1

8+&'1

 

 

 

 

for video format.

 

 

#761

 

 

 

065%

 

AUTO ó NTSCó

PAL ó SECAM

 

2#.

 

 

5'%#/

 

N-PALó M-PAL

ó NTSC4.43

 

VIDEO FORMAT

 

065%

 

/ 2#.

 

• This item is performed only for a video signal

 

0 2#.

 

 

 

 

from the VIDEO port or the S-VIDEOport.

 

 

The AUTO mode automatically selects the optimum mode.

The AUTO operation may not work well for some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), please select the mode depending on the input signal.

 

Using the buttons ▲/▼ turns the frame lock function on/off.

 

TURN ON ó TURN OFF

 

• This item performs only at a RGB signal with vertical frequency of

FRAME LOCK

50 to 60 Hz.

• When the TURN ON is selected, a moving picture is displayed

 

 

more smoothly.

 

• This function may cause a certain degradation of the picture. In

 

such a case, please select the TURN OFF.

Set the RGB input signal type for the RGB port.

 

(1) Use the ◄/► buttons to select the RGB

4)$ 4)$

 

port to be set.

 

 

4)$ +0

 

RGB1 ó RGB2

5;0% 10 ) 10

 

(2) Use the ▲/▼ buttons to select the RGB

5;0% 10 ) 1((

 

 

RGB IN

input signal type.

 

SYNC ON G ON ó SYNC ON G OFF

 

 

 

Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode allows reception of SYNC ON G.

In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal.

33

INPUT Menu

INPUT Menu (continued)

Item

Description

 

 

 

The resolution for the RGB1 and RGB2 input signals can be set on

 

this projector.

 

 

 

(1) In the INPUT menu select RESOLUTION using the ▲/▼ buttons and

 

press the ► button.

 

 

 

The RESOLUTION menu will be displayed.

4'51.76+10

 

(2) In the RESOLUTION menu select the

 

#761

 

56#0&

Z

 

resolution you wish to display using the ▲/▼

Z

 

 

 

buttons.

 

Z

 

 

 

 

Selecting AUTO will set a resolution

%7561/

Z

 

appropriate to the input signal.

RESOLUTION MENU

 

(3) Pressing the ► or Enter button when

 

 

 

 

selecting a STANDARD resolution will

 

 

 

automatically adjust the horizontal and

INFORMATION

 

vertical positions, clock phase and horizontal

 

RGB

 

size and automatically select an aspect ratio.

80x 768@ 60

 

The INFORMATION dialog (43) will be

 

 

 

displayed.

 

 

RESOLUTION

(4) To set a custom resolution use the ▲/▼

%7561/ 4'51.76+10

 

 

*2

buttons to select CUSTOM and the CUSTOM

*14< Z 8'46

RESOLUTION BOX will be displayed. Set

Z

 

 

the horizontal (HORZ) and vertical (VERT)

37+6

5'6

 

resolutions using the ▲/▼/◄/►

CUSTOM RESOLUTION

 

buttons. *1

 

BOX

 

 

 

 

 

(5) To save the setting place the cursor on the

INFORMATION

 

right-mostdigit and press the ► button.

 

 

RGB

 

The horizontal and vertical positions,

99 x 744@ 60

 

clock phase and horizontal size will be

 

 

 

automatically adjusted and an aspect ratio will

4'51.76+10

 

be automatically selected.

 

 

 

After the INFORMATION(43) dialog has

 

#761

 

 

Z

 

displayed for about 10 seconds the screen will

56#0&

 

Z

 

 

 

return to the RESOLUTION menu displaying

 

Z

 

the changed resolution.

%7561/

Z

 

 

 

(6) To revert back to the previous resolution

 

 

 

without saving changes place the cursor on

 

 

 

the left-mostdigit and press the ◄ button.

 

 

 

The screen will then return to the RESOLUTION menu displaying the

 

previous resolution.

 

 

*1 Not all resolutions are guaranteed.

*2 For some pictures, this function may not work well.

34

SETUP Menu

SETUP Menu

With the SETUP menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

/'07 =4)$ ?

5'.'%6

 

 

2+%674'

#761 -';5610'':'%76'

+/#)'

-';5610'

+0276

9*+52'4 014/#.

5'672

/+4414 014/#.

5%4''0

81.7/'

126+10

#7&+1

0'6914-

 

'#5; /'07

 

Item

Description

 

 

 

Selecting this item performs the Automatic keystone distortion

 

correction. Projector automatically corrects vertical keystone

 

distortion due to the (forward/backward) setup angle by itself.

 

• This function will be executed only once when selected in the

 

Menu. When the slant of the projector is changed, executes this

 

function again.

 

• When V:INVERT or H&V:INVERT is selected to the MIRROR item

AUTO

in the SETUP menu, if the projector screen is inclined or angled

downward, this function may not work correctly.

KEYSTONE

EXECUTE

• When the zoom adjustment is set to the TELE (telephoto focus),

 

this correction may be excessive. This function should be used

 

when the zoom adjustment is set to the WIDE (wide-anglefocus)

 

whenever possible.

 

• When vertical degree is almost 0 degree, the automatic keystone

 

distortion correction may not work.

 

• When vertical degree is over ±30 degree, the automatic keystone

 

distortion correction may not work well.

 

• This function will be unavailable when Transition Detector is on (48).

 

Using the buttons ▲/▼ corrects the keystone distortion.

KEYSTONE

Upper in the data ó Lower in the data

• The adjustable range of this function will vary with the type of input

 

signal. At some signals, this function may not work well.

 

• This function will be unavailable when Transition Detector is on (48).

 

Using the buttons ▲/▼ turns off/on the whisper mode.

WHISPER

NORMAL ó WHISPER

• When the WHISPER is selected, acoustic noise and screen

 

 

brightness are reduced.

35

SETUP Menu

SETUP Menu (continued)

Item

 

 

 

 

Description

 

Using the buttons ▲/▼ switches the mode for mirror status.

 

 

 

 

 

 

 

 

 

 

MIRROR

NORMAL ó H:INVERTó V:INVERTó H&V:INVERT

If Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (48) will be displayed when projector is restarted after the power switch is turned off.

VOLUME

Using the buttons ▲/▼ adjusts the volume.

 

 

High ó Low

 

 

 

 

 

 

Allocates the audio ports.

37+6

 

 

Choose a picture input port using the buttons

#7&+1

 

 

 

 

 

▲/▼ (1), then select the audio port to be

4)$

 

 

4)$

 

 

interlocked with the input port using the

5 8+&'1

 

 

 

%1/210'06

 

AUDIO

buttons ◄/► (2). When off is selected, all

8+&'1

 

 

 

 

 

audio ports do not work for the input port.

 

 

(1)RGB1 ó RGB2ó COMPONENTó S-VIDEOó VIDEO

(2)1 ó 2ó 3ó

36

SCREEN Menu

SCREEN Menu

With the SCREEN menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

/'07 =4)$ ?

5'.'%6

 

 

2+%674'

.#0)7#)' '0).+5*

+/#)'

/'07 215+6+10

+0276

$.#0- $.#%-

5'672

56#46 72 14+)+0#.

5%4''0

/[5ETGGP

126+10

/[5ETGGP .QEM 6740 1((

0'6914-

/'55#)' 6740 10

'#5; /'07

5174%' 0#/'

Item

 

Description

 

 

 

Using the buttons ▲/▼ switches the OSD (On Screen Display)

 

language.

 

 

ENGLISH ó FRANÇAISó DEUTSCHó ESPAÑOLó ITALIANO

LANGUAGE

NORSK ó NEDERLANDSó PORTUGUÊSó

 

ó

ó ó SVENSKAó

 

 

SUOMI ó POLSKIó TÜRKÇE

Using the buttons ◄/►/▲/▼ adjusts the menu position.

MENU POSITION To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds.

Using the buttons ▲/▼ switches the mode for the blank screen.

The blank screen is a screen for the temporarily blanking feature

(22). It is displayed by pressing the BLANK button on the remote control.

 

MyScreen ó ORIGINALó BLUEó WHITEó BLACK

BLANK

MyScreen is a screen you can register as a desired screen. The

 

ORIGINAL screen is the existing standard screen. BLUE, WHITE

 

and BLACK are non-patterned(plain) screens in each color.

To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes.

For the MyScreen, please refer to the MyScreen item (38).

37

SCREEN Menu

SCREEN Menu (continued)

Item

Description

 

 

 

Using the buttons ▲/▼ switches the mode for the start-upscreen.

 

The start-upscreen is a screen displayed when no signal or an

 

unsuitable signal is detected.

 

MyScreen ó ORIGINALó TURN OFF

 

MyScreen is a screen you can register as a desired screen.The

 

ORIGINAL screen is the existing standard screen. When TURN

START UP

OFF is selected, the BLACK screen is used.

• To avoid remaining as an afterimage, the MyScreen and the

 

 

ORIGINAL screens will change to the BLANK screen after several

 

minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it

 

will change to the BLACK screen.

 

• For the MyScreen, please refer to the item MyScreen below. For

 

the BLANK screen, please refer to the BLANK item (37).

 

• This function will be unavailable and fixed to Myscreen when

 

MyScreen Password in the Security Menu is on.

 

This item functions for capturing the MyScreen of the blank screen

 

and the start-upscreen. Please execute displaying the input

 

including the picture you want to capture.

 

1. Selecting this item displays a dialog titled “MyScreen”. It will ask

 

you if you start capturing the picture from the current screen.

 

Please wait for the target picture to be displayed, and press the

 

ENTER button on the remote control when the picture is displayed.

 

The picture will freeze and the frame for capturing appears.

 

To stop performing, press the RESET or ESC button on the

 

remote control.

 

2. Using the buttons ◄/►/▲/▼ adjusts the frame position. Please

MyScreen

move the frame to the position of the picture which you want to use.

The frame may not be able to be moved for some input signals.

 

To start registration, press the ENTER button on the remote control.

 

To restore the screen and return to the previous dialog, press the

 

RESET or ESC button on the remote control.

 

Registration takes several minutes. When the registration is

 

completed, the registered screen and the message “MyScreen

 

registration is finished.” are displayed for several seconds. If the

 

registration failed, the message “A capturing error has occurred.

 

Please try again.” is displayed.

 

• This function will be unavailable when MyScreen Password in the

 

Security Menu is on.

 

NOTE : The KEYSTONE cannot be adjusted while using the

 

MyScreen function.

Using the buttons ▲/▼ turns on/off the MyScreen lock function.

TURN ON ó TURN OFF

MyScreen Lock When the TURN ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen.

• This function will be unavailable when MyScreen Password in the Security Menu is on.

38

SCREEN Menu

SCREEN Menu (continued)

Item

Description

Using the buttons ▲/▼ turns on/off the message function.

TURN ON ó TURN OFF

When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting

”NO INPUT IS DETECTED”

”SYNC IS OUT OF RANGE” "Searching….” while searching for the input

MESSAGE ”Detecting….” while an input signal is detected

The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the My Memory displayed by changing The indication of the Picture Mode displayed by changing

The indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button.

• When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (22).

Each input port for this projector can have a name applied to it.

 

(1) Use the ▲/▼ buttons on the SCREEN

5174%' 0#/'

 

 

menu to select SOURCE NAME and press

4)$

 

 

the ► button. The SOURCE NAME menu

4)$ &'5-6122%

 

will be displayed.

%1/210'06 &8&

 

 

5 8+&'1 %#/'4#

 

 

 

 

(2) Use the ▲/▼ buttons on the SOURCE

8+&'1 864

 

 

 

 

 

NAME menu to select the port to be named

SOURCE NAME MENU

 

and press the ► button. The SOURCE

*Right side of the menu is blank

NAME dialog will be displayed.

until a name is specified

 

 

 

 

(3) The current name will be displayed

0#/' 4)$

5'.'%6

 

4)$

 

 

on the first line. Use the ◄/►/▲/▼ and

 

 

#$% & ' ( ) * + ,-. / 0

 

ENTER or INPUT buttons to select and

1 2 3 4 5 6 7 8 9 : ; <

 

 

C D E F G H I J K L M N O P

 

enter characters. The RESET button can

 

Q R S T U V W X Y Z [ \

 

be used to erase 1 character at a time. The

 

 

A !

 

 

SOURCE NAME name can be a maximum of 16 characters.

'5%37+6

'06'40':6

(4) To change an already inserted character, 0#/' 4)$

5'.'%6

 

press the ▲ button while the cursor is on the

4 )$

 

 

 

 

[A-N]row to move the cursor to the name

# $% & ' ( ) * + ,-. / 0

 

1 2 3 4 5 6 7 8 9 : ; <

displayed on the first line and use the ◄/►

 

C D E F G H I J K L M N O P

 

buttons to select character to be changed.

Q R S T U V W X Y Z [ \

 

 

 

Once a character in the name is selected

A !

 

 

use the ▼ button to move the cursor back

'5%37+6

 

 

down to the character entry area to select

0#/' 4)$

5'.'%6

 

and enter characters as described above.

4 )$

 

 

 

 

(5) Select

and press the ENTER or

#$% & ' ( ) * + ,-. / 0

 

1 2 3 4 5 6 7 8 9 : ; <

 

INPUT buttons when finished entering text.

C D E F G H I J K L M N O P

 

Q R S T U V W X Y Z [ \

 

To revert to the previous name without

 

 

saving changes press the ESC or ◄ button

A !

 

 

'5%37+6

'06'40':6

and the INPUT button simultaneously.

 

 

 

 

 

 

39

 

OPTION Menu

OPTION Menu

With the OPTION menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table.

/'07 =4)$ ?

5'.'%6

2+%674'

#761 5'#4%* 6740 1((

+/#)'

#761 -';5610'6740 1((

+0276

#761 10 6740 1((

5'672

#761 1(( OKP

5%4''0

.#/2 6+/' J

126+10

(+.6'4 6+/' J

0'6914-

/; $76610

'#5; /'07

5'48+%'

 

5'%74+6;

Item

Description

 

 

 

Using the buttons ▲/▼ turns on/off the automatic signal search function.

 

TURN ON TURN OFF

 

When the TURN ON is selected, detecting no signal automatically cycles

AUTO SEARCH

through input ports in the following order. The search is started from the

current port. Then when an input is found, the projector will stop searching

 

 

and display the image.

 

RGB IN1 RGB IN2COMPONENT VIDEOS-VIDEOVIDEO

 

 

 

Using the buttons ▲/▼ turns on/off the automatic keystone function.

 

TURN ON TURN OFF

 

TURN ON : Automatic keystone distortion correction will be

AUTO

executed whenever changing the slant of the projector.

TURN OFF : This function is disabled. Please execute the AUTO

KEYSTONE

KEYSTONE EXECUTE in the SETUP Menu for automatic keystone

 

distortion correction.

 

When the projector is suspended from the ceiling this feature will

 

not function properly so select TURN OFF.

 

This function will be unavailable when Transition Detector is on (48).

 

Using the buttons ▲/▼ turns on/off the AUTO ON function.

 

TURN ON TURN OFF

 

When set to TURN ON, the lamp will only be automatically turned on when

 

the Power switch is turned on after the power was turned off by Power

 

switch last time.

 

The lamp will not be automatically turned on when the Power switch is

 

turned on if the lamp was turned off with the following procedures.

 

• The lamp was turned off with a remote control, projector button, or

 

power turn off command.

AUTO ON

• The lamp was turned off with an AUTO OFF function (41).

 

• The lamp was turned on by an AUTO ON function and was turned

 

off about 30 minutes after no signal had been detected.

 

When no input is detected after the power on and AUTO OFF time is set to 0,

 

the projector will be turned off after about 30 minutes passed.

 

When no input is detected after the power on and AUTO OFF time is set to

 

1 to 99, the projector will be turned off after the passed time reaches at the

 

set time.

 

If one of the projector's buttons or the remote control buttons is pressed

 

or one of the commands (except get commands) is transmitted from the

 

control port during the corresponding time, projector will not be turned off.

40

OPTION Menu

OPTION Menu (continued)

Item

 

Description

 

 

 

Using the buttons ▲/▼ adjusts the time to count down to

 

automatically turn the projector off.

 

Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)

 

AUTO OFF

AUTO OFF

 

ENABLE

DISABLE

 

 

0

AUTO OFF

When the time is set to 0, the projector is not turned off automatically.

When the time is set to 1 to 99, and when the passed time with no-

 

signal or an unsuitable signal reaches at the set time, the projector

 

lamp will be turned off.

 

 

If one of the projector's buttons or the remote control buttons

 

is pressed or one of the commands (except get commands) is

 

transmitted from the control port during the corresponding time,

 

projector will not be turned off.

 

Please refer to the section “Turning off the power” (17).

The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp.

Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. To reset the lamp time, select the

LAMP TIME RESET using the button ▲.

RESET ï CANCEL

Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

For the lamp replacement, see the section "Lamp" (53, 54).

 

The filter time is the time counted after the last resetting. It is shown

 

in the OPTION menu as the usage time of the air filter.

 

Pressing the RESET button on the remote control or the button ► of the

 

projector displays a dialog. To reset the filter time, select the RESET using

FILTER TIME

the button ▲.

 

RESET ï CANCEL

 

• Please reset the filter time only when you have cleaned or replaced

 

the air filter, for a suitable indication about the air filter.

 

• For the air filter cleaning, see the section "Air filter" (55, 56).

 

Sets the assigned function for the MY BUTTON1 and 2 buttons on

 

the included remote control.

 

• RGB1: Sets port to RGB1.

 

• RGB2: Sets port to RGB2.

 

• COMPONENT: Sets port to COMPONENT.

 

S-VIDEO:Sets port toS-VIDEO.

 

• VIDEO: Sets port to VIDEO.

MY BUTTON

e-SHOT:Displays thee-SHOTmenu (51).

• INFORMATION: Displays INPUT INFORMATION (43).

 

AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE correction (35).

MY MEMORY: Loads MY MEMORY settings (29).

PICTURE MODE: Changes the PICTURE mode (25).

FILTER RESET: Displays the filter time reset confirmation dialogue (41).

VOLUME+: Sets the volume up.

VOLUME-:Sets the volume down.

41

OPTION Menu

OPTION Menu (continued)

Item

Description

 

 

 

Selecting this item displays the SERVICE menu.

 

Select an item using the buttons ▲/▼, and press the button ► or

 

the ENTER button on the remote control to execute the item.

 

FAN SPEED AUTO ADJUSTGHOSTFILTER MESSAGEKEY LOCK

 

FACTORY RESET INFORMATIONREMOTE FREQ.

 

FAN SPEED

 

Using the buttons ▲/▼ switches the rotation speed of the cooling

 

fans. The HIGH is the mode for use at highlands etc. Note that the

 

projector is noisier when the HIGH is selected.

 

HIGH ó NORMAL

 

AUTO ADJUST

 

Using the buttons ▲/▼ enables/disables the automatic adjustment.

 

When DISABLE is selected, the automatic adjustment feature is

 

disabled, although rough adjustment is automatically performed

 

depending on the basic setting.

 

ENABLE ó DISABLE

 

• Depending on conditions, such as input image, signal cable to the

 

projector, environment around the projector, etc., the automatic adjustment

 

may not work correctly. In such a case, please choose DISABLE to

 

disable the automatic adjustment, and make adjustment manually.

 

GHOST

SERVICE

1. Select a color element of ghost using the buttons ◄/►.

2. Adjust the selected element using the buttons ▲/▼ to disappear ghost.

FILTER MESSAGE

Use the ▲/▼ button to set the timer for the interval to show the message for cleaning up the air filter.

50h ó 100hó 200hó 300hó TURN OFF

After selecting “50h”, “100h”, “200h”, or “300h”, the message “REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK” will appear after the timer reaches the interval time set by the menu. (59) When the “TURN OFF” is chosen, the air filter cleaning message will not appear.

Please check and clean the air filter periodically, even if there is no message. If the air filter becomes to be blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.

It is recommended to choose “100h” in general. Please be careful with the operating environment of the projector and the condition of the air filter, especially when the “200h”, “300h” or “TURN OFF” is chosen.

KEY LOCK

Using the buttons ▲/▼ turns on/off the key lock feature. When

TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked.

TURN ON ó TURN OFF

• Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.

42

OPTION Menu

OPTION Menu (continued)

Item

 

Description

 

 

REMOTE FREQ.

 

 

 

Use the ▲/▼ button to change the Projector's remote sensor

 

setting (16).

 

 

 

1:NORMAL ó 2:HIGH

 

 

 

Items with a checkmark are on. The factory default setting is for

 

both 1:NORMAL and 2:HIGH to be on. If the remote control does

 

not function correctly set the this to either only 1 or only 2 as

 

described in Remote Control Settings (16).

 

 

Neither can be turned off at the same time.

 

 

INFORMATION

 

 

 

Selecting this item displays a dialog titled “INPUT INFORMATION”.

 

It shows the information about the current input.

 

 

INPUT-INFORMATION

INPUT-INFORMATION

INPUT-INFORMATION

SERVICE

RGB

S-VIDEO

COMPONENT

0 4x768 @60Hz

SECAM

576i @50

 

FRAME LOCK

AUTO

SCART RGB

The “FRAME LOCK” message on the dialog means the frame lock function is working.

The “SCART RGB” message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the

COMPONENT item in INPUT menu. (33)

• This item can't be selected for no signal and sync out.

FACTORY RESET

Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and OPTION_SECURITY are not reset.

RESET ï CANCEL

43

OPTION Menu

OPTION Menu (continued)

Item

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This projector is equipped with security functions.

 

 

 

 

 

 

 

 

User registration is required before using the security functions.

 

Please contact your local dealer.

 

 

 

 

 

 

 

 

1. Using Security Features

 

 

 

 

 

 

 

 

1.1 Inputting the PASSWORD

 

 

 

 

 

 

 

 

1.1-1Use the ▲/▼ buttons on the OPTION

 

 

 

 

 

 

 

 

menu to select SECURITY and press the ►

 

 

 

 

 

 

 

 

button. The ENTER PASSWORD box will be

 

 

 

 

 

 

 

 

displayed. The factory default PASSWORD is

5'%74+6;

 

 

 

 

3046. This PASSWORD can be changed (1.2

'06'4 2#55914&

 

 

 

 

Changing the PASSWORD).

 

 

 

 

 

 

 

NOTE : It is strongly recommended the factory

 

 

 

 

 

 

 

 

37+6

0':6

 

 

 

 

default PASSWORD to be changed as

 

ENTER PASSWORD

 

soon as possible.

 

BOX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5'%74+6;

 

 

 

 

 

1.1-2Use the ▲/▼/◄/► buttons to enter the

5'%74+6; 2#55914& %*#0)'

 

 

 

 

/[5ETGGP 2#55914& 6740 1((

 

 

registered PASSWORD. Move the cursor to

2+0 .1%- 6740 1((

 

 

 

64#05+6+10 &'6'%614 6740 1((

 

 

 

the right side of the ENTER PASSWORD

 

 

 

 

 

 

 

 

 

 

 

BOX and press the ► button to display the

 

 

 

 

 

 

 

 

SECURITY menu. If an incorrect PASSWORD

 

 

 

 

 

 

 

 

 

 

SECURITY MENU

 

is input the ENTER PASSWORD BOX will

 

 

 

 

 

 

 

 

 

 

 

be displayed again. If incorrect PASSWORD

 

 

 

 

 

 

 

 

is input 3 times the projector will turn off.

 

 

 

 

 

 

 

 

Afterwards the projector will turn off every time

 

 

 

 

 

 

 

SECURITY

an incorrect PASSWORD is input.

 

 

 

 

 

 

 

 

 

5'%74+6;

 

 

 

 

1.2 Changing the PASSWORD

'06'4 0'9 2#55914&

 

 

 

 

 

 

 

 

 

1.2-1Use the ▲/▼ buttons on the SECURITY menu

 

 

 

 

 

 

 

 

 

 

 

 

 

to select SECURITY PASSWORD CHANGE

37+6

0':6

 

 

 

 

 

 

 

 

 

 

 

and press the ► button to display the ENTER

ENTER NEW PASSWORD

 

NEW PASSWORD BOX.

BOX

 

 

 

 

 

1.2-2Use the ▲/▼/◄/► buttons to enter the new

 

 

 

 

 

 

 

 

PASSWORD.

 

 

 

 

 

 

 

 

1.2-3Move the cursor to the right side of the

5'%74+6;

 

 

 

 

0'9 2#55914& #)#+0

 

 

 

ENTER NEW PASSWORD BOX and press

 

 

 

 

 

 

the ► button to display the NEW PASSWORD

 

 

 

 

 

 

%#0%'.

1-

 

 

 

AGAIN BOX, enter the same PASSWORD

 

 

NEW PASSWORD

 

again.

 

 

 

 

 

AGAIN BOX

 

1.2-4Move the cursor to the right side of the NEW

 

 

 

 

 

 

 

 

PASSWORD AGAIN BOX and press the ►

 

 

 

 

 

 

 

 

button and the NOTE NEW PASSWORD BOX

5'%74+6;

 

 

 

 

will be displayed for about 20 seconds, please

016' 0'9 2#55914&

 

 

 

 

 

 

 

 

 

 

 

make note of the PASSWORD during this time.

 

 

 

 

 

 

Pressing the ENTER button on the remote

 

 

 

 

 

 

 

'06'4

':+6

 

 

 

 

controll or INPUT button on the projector will

 

 

NOTE NEW

 

close the NOTE NEW PASSWORD BOX.

 

 

PASSWORD BOX

 

NOTE : Please do not forget your PASSWORD.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

44

OPTION Menu

OPTION Menu (continued)

Item

Description

 

 

 

 

 

 

 

1.3 If you have forgotten your PASSWORD

 

 

 

1.3-1Follow the procedure in1.1-1to display the

 

 

 

ENTER PASSWORD BOX.

 

 

 

1.3-2While the ENTER PASSWORD BOX is

 

 

 

displayed, press and hold the RESET button

5'%74+6; 2#55914&

 

 

+PSWKTKPI %QFG

 

 

on the remote control for about 3 seconds or

 

 

 

 

 

press and hold the INPUT and ► buttons on

 

 

 

 

 

 

 

the projector for about 3 seconds.

Inquiring Code

 

The 10 digit Inquiring Code will be displayed.

(PASSWORD)

 

NOTE: If there is no key input for about 55 seconds

 

 

 

while the Inquiring Code is displayed the menu will

 

 

 

close. If necessary repeat the process from 1.3-1.

 

 

 

1.3-3Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD

 

will be sent after your user registration information is confirmed.

 

2. Using the MyScreen PASSWORD Function

 

 

 

The MyScreen PASSWORD function can be used to prohibit access to the

 

MyScreen function and prevent the currently registered MyScreen image

 

from being overwritten.

 

 

 

 

SECURITY

2.1 Turning on the MyScreen PASSWORD

 

/[5ETGGP 2#55914&

 

Function

 

 

6740 10

 

 

2.1-1Use the ▲/▼ buttons on the SECURITY

 

 

6740 1((

 

 

menu to select MyScreen PASSWORD and

MyScreen PASSWORD

 

press the ► button to display the MyScreen

 

 

on/off menu

 

PASSWORD on/off menu.

 

 

 

 

 

 

 

2.2 Setting the PASSWORD

 

 

 

 

 

2.2-1Display the MyScreen on/off menu using the

 

 

 

 

 

procedure in 2.1-1.

 

 

 

 

 

2.2-2Use the ▲/▼ buttons on the MyScreen

 

/[5ETGGP

 

'06'4 2#55914&

 

 

PASSWORD on/off menu to select TURN ON.

 

 

 

 

The ENTER PASSWORD BOX (small) will be

 

 

 

 

 

37+6

0':6

 

 

displayed.

ENTER PASSWORD

 

2.2-3Use the ▲/▼/◄/► buttons to enter the

 

BOX (small)

 

 

 

 

 

 

PASSWORD. Move the cursor to the right

 

/[5ETGGP

 

side of the ENTER PASSWORD BOX

%*'%- 2#55914&

 

 

(small) and press the ► button to display the

 

 

 

 

CHECK PASSWORD BOX, enter the same

 

 

 

 

 

37+6

0':6

 

 

PASSWORD again.

CHECK PASSWORD

 

 

BOX

 

 

45

OPTION Menu

OPTION Menu (continued)

Item

Description

 

 

 

 

 

 

 

2.2-4Move the cursor to the right side of the CHECK

 

 

 

PASSWORD BOX and press the ► button to

/[5ETGGP

 

display the PASSWORD for about 20 seconds,

%1/2.'6'

 

 

please make note of the PASSWORD during

 

 

 

this time. After the PASSWORD has displayed

 

 

 

'06'4 ':+6

 

 

for about 20 seconds the screen will return to

 

 

PASSWORD BOX

 

the MyScreen PASSWORD on/off menu.

 

 

 

 

Pressing the ENTER button on the remote control

 

 

 

or INPUT button on the projector will close the

 

 

 

PASSWORD box.

 

 

 

When a PASSWORD is set for MyScreen:

 

 

The MyScreen registration function (and menu) will be unavailable.

The START UP setting will be locked on MyScreen (and the menu will be unavailable).

Turning the MyScreen PASSWORD off will allow normal operation of both functions.

NOTE : Please do not forget your MyScreen PASSWORD.

2.3 Turning the PASSWORD off

2.3-1Follow the procedure in2.1-1to display the MyScreen PASSWORD

 

on/off menu.

 

 

 

2.3-2Select TURN OFF to display the ENTER PASSWORD BOX (large).

 

Enter the registered PASSWORD and the screen will return to the

 

 

MyScreen on/off menu.

 

 

SECURITY

If an incorrect PASSWORD is input the menu will close. If necessary repeat

 

the process from 2.3-1.

 

 

 

2.4 If you have forgotten your PASSWORD

 

 

 

2.4-1Follow the procedure in2.1-1to display the MyScreen PASSWORD

 

on/off menu.

/[5ETGGP

 

 

 

 

 

2.4-2Select TURN OFF to display the ENTER

'06'4 2#55914&

 

 

+PSWKTKPI %QFG

 

 

PASSWORD BOX (large). The 10 digit

 

 

 

 

 

Inquiring Code will be displayed inside the

 

 

 

 

 

37+6

0':6

 

BOX.

ENTER PASSWORD BOX

 

2.4-3Contact your dealer with the 10 digit Inquiring

(large)

 

 

 

 

 

Code. Your PASSWORD will be sent after

 

 

 

your user registration information is confirmed.

 

 

 

3. Using the PIN LOCK Function

 

 

 

PIN LOCK is a function which prevents the projector from being used unless

 

a registered Code is input.

 

 

 

3.1 Registering the PIN Code

2+0 .1%-

 

 

3.1-1Use the ▲/▼ buttons on the SECURITY menu

6740 10

 

 

to select PIN LOCK and press the ► button

6740 1((

 

 

or the ENTER button to display the PIN LOCK

 

 

 

on/off menu.

PIN LOCK on/off

 

 

menu

 

3.1-2Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed.

46

OPTION Menu

OPTION Menu (continued)

Item

Description

 

 

 

 

 

 

 

 

 

3.1-3Input a 4 part PIN Code using the ▲/▼/◄/►

 

 

 

 

/RGB and INPUT buttons.

 

 

 

 

2+0$1:

 

 

 

A CONFIRMATION BOX will appear. Reenter the

+PRWV 2+0 %QFG

 

 

 

 

 

 

same PIN Code. This will complete the PIN Code

 

 

4)

$

 

 

registration.

PIN BOX

 

 

 

NOTE: If there is no key input for about 55 seconds

 

 

 

 

while the PIN BOX or the CONFIRMATION BOX are

 

 

 

 

displayed the menu will close. If necessary repeat

 

 

 

 

2+0$1:

 

 

 

the process from 3.1-1.

%QPHKTOCVKQP

 

 

 

Afterwards, anytime the projector is restarted after

 

 

 

4)

$

 

 

the power switch is turned off the PIN BOX will be

 

 

CONFIRMATION BOX

 

displayed. Enter the registered PIN Code.

 

(PIN BOX)

 

 

 

The projector can be used after entering the

 

 

 

 

registered PIN Code. If an incorrect PIN Code is

 

 

 

 

input the PIN BOX will be displayed again.

 

 

 

 

If an incorrect PIN Code is input 3 times the projector will turn off. Afterwards

 

the projector will turn off every time an incorrect PIN Code is input. The

 

 

 

projector will also turn off if there is no key input for about 5 minutes while

 

the PIN BOX is displayed.

 

 

 

 

This function will activate only when the projector is started after the power

SECURITY

switch was turned off.

 

 

 

NOTE : Please do not forget your PIN Code.

 

 

 

3.2 Turning Off the PIN LOCK Function

3.2-1Follow the procedure in3.1-1to display the PIN LOCK on/off menu.

Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be displayed.

Enter the registered PIN Code to turn the PIN LOCK function off. If an incorrect PASSWORD is entered the menu will close.

3.3 If you have forgotten your PIN Code

3.3-1While the PIN BOX is displayed, press and

2+0$1:

+PSWKTKPI %QFG

hold the RESET button for three seconds or

 

press and hold the INPUT and ► buttons for

 

Inquiring Code

three seconds. The 10 digit Inquiring Code will

(PIN Code)

be displayed.

 

NOTE: If there is no key input for about 5 minutes

 

while the Inquiring Code is displayed the projector

 

will turn off.

 

3.3-2Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed.

47

OPTION Menu

OPTION Menu (continued)

Item

Description

 

4. Using the Transition Detector Function

 

 

 

 

 

 

 

 

While the Transition Detector function is ON, when power switch is started to

 

supply to the projector, it might react as below.

 

 

 

 

 

 

 

 

• Transition Detector alarm shown below might appear on screen, if the

 

projector has been moved or re-installed.

 

 

 

 

 

 

 

 

• Transition Detector alarm might appear on screen, if the MIRROR setting

 

has been changed.

 

 

 

 

 

 

 

 

• Keystone adjustment feature has been prohibited as long as the Transition

 

Detector function is ON.

 

 

 

 

 

 

 

 

4.1 Turning On the Transition Detector Function

 

 

 

 

4.1-1Use the ▲/▼ buttons on the SECURITY menu to

 

 

 

 

 

 

 

 

select Transition Detector and press the ► or the

 

 

 

6TCPUKVKQP &GVGEVQT

 

ENTER button to display the Transition Detector

 

6740 10

 

 

 

on/off menu. Select TURN ON and the current

 

6740 1((

 

 

 

angle and mirror setting will be recorded.

 

Transition Detector

 

NOTE: This feature may not function properly if the projector

 

 

is not in a stable position when TURN ON is selected.

 

 

 

on/off menu

 

 

 

 

 

 

 

 

 

4.1-2If this function is set to TURN ON when the

 

64#05+6+10 &'6'%614 10

 

 

 

 

 

 

 

 

 

 

 

vertical angle of the projector or mirror setting

 

6JG RTQLGEVQT JCU DGGP VTCPUHGTTGF

 

 

HTQO RTGXKQWUN[ KPUVCNNGF RQUKVKQP

 

at which the projector is turned on is different

 

2+0 $1:

 

 

 

 

 

+H [QW YKUJ VQ JCXG C USWCTG KOCIG

 

than the previously recorded the Transition

 

 

 

QP UETGGP CICKP

 

 

FKUCDNG 6TCPUKVKQP &GVGEVQT QP /GPW

 

Detector Alarm will be displayed and the

Transition Detector Alarm

 

projector will not display the input signal.

 

Set the Transition Detector off in the SECURITY menu or set the projector at the

 

recorded angle to display the input signal.

 

 

 

 

 

 

 

SECURITY

If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off.

 

This function will activate only when the projector is started after the power

 

switch was turned off.

 

 

 

 

 

 

 

 

4.2 Setting the Transition Detector PASSWORD

 

 

 

 

4.2-1Use the ▲/▼ buttons on the SECURITY menu to select Transition

 

Detector and press the ► or the ENTER button to display the Transition

 

Detector on/off menu.

 

 

 

 

 

 

 

 

4.2-2Use the ▲/▼ buttons on the Transition Detector

 

 

 

6TCPUKVKQP &GVGEVQT

 

on/off menu to select TURN ON. The ENTER

 

'06'4 2#55914&

 

 

 

PASSWORD BOX (small) will be displayed.

 

 

 

 

 

 

4.2-3Use the ▲/▼/◄/► buttons to enter a PASSWORD.

 

 

 

 

 

 

 

 

 

37+6

0':6

 

 

 

 

ENTER PASSWORD

 

Move the cursor to the right side of the ENTER

 

 

PASSWORD BOX (small) and press the ► button

 

 

 

BOX (small)

 

 

 

 

6TCPUKVKQP &GVGEVQT

 

to display the CHECK PASSWORD BOX, enter the

 

 

 

 

 

%*'%- 2#55914&

 

 

 

same PASSWORD again.

 

 

 

 

 

 

 

 

 

 

4.2-4Move the cursor to the right side of the CHECK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

37+6

0':6

 

 

 

PASSWORD BOX and press the ► button to

 

CHECK PASSWORD

 

display the PASSWORD for about 20 seconds,

 

 

 

BOX

 

 

 

 

please make note of the PASSWORD during

 

 

 

6TCPUKVKQP &GVGEVQT

 

this time. After the PASSWORD has displayed

 

%1/2.'6'

 

 

 

 

 

 

 

 

 

 

 

for about 20 seconds the screen will return to

 

 

 

 

 

 

the Transition Detector on/off menu.

 

 

 

 

 

 

 

 

'06'4

':+6

 

 

 

Pressing the ENTER button on the remote controll or the

 

 

PASSWORD BOX

 

INPUT button on the projector will close the PASSWORD BOX.

 

 

 

 

NOTE : Please do not forget your Transition Detector PASSWORD.

 

 

 

 

 

 

 

 

 

 

 

 

48

OPTION Menu

OPTION Menu (continued)

Item

 

Description

 

 

 

4.3 Setting the Transition Detector off

4.3-1

Follow the procedure in 4.1-1to display the Transition Detector on/off

 

 

menu.

4.3-2

Select TURN OFF to display the ENTER PASSWORD BOX (large).

 

 

Enter the registered PASSWORD and the screen will return to the

 

 

Transition Detector on/off menu.

 

If an incorrect PASSWORD is input the menu will close. If necessary repeat

 

the process from 4.3-1.

SECURITY

4.4 If you have forgotten your PASSWORD

 

 

4.4-1Follow the procedure in4.1-1to display the Transition Detector on/off

 

 

menu.

 

 

 

4.4-2Select TURN OFF to display the ENTER

6TCPUKVKQP &GVGEVQT

 

 

PASSWORD BOX (large). The 10 digit

'06'4 2#55914&

 

 

+PSWKTKPI %QFG

 

 

Inquiring Code will be displayed inside the

 

 

 

BOX.

 

 

 

 

 

37+6

0':6

ENTER PASSWORD BOX

4.4-3Contact your dealer with the 10 digit Inquiring(large) Code. Your PASSWORD will be sent after your

user registration information is confirmed.

49

NETWORK Menu

NETWORK Menu RJ Model Only.

Select [Network] from the main menu to access the following functions.

/'07 =4)$ ?

 

5'.'%6

2+%674'

&*%2

6740 1((

+/#)'

+2 #&&4'55

 

+0276

57$0'6 /#5-

 

5'672

&'(#7.6 )#6'9#;

5%4''0

6+/' &+(('4'0%'

126+10

' #0& 6+/'

 

0'6914-

G 5*16

 

'#5; /'07 +0(14/#6+10

 

 

5'48+%'

 

NOTE • The factory default setting for DHCP is “TURN ON”. You do not have to set up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network has DHCP enabled.(User’s Manual - Network Functions)

• If you are not utilizing SNTP (User’s Manual - Network Functions), then you must set the DATE AND TIME during the initial installation. Please refer to the item DATE AND TIME on the following list.

NOTE Ask with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause unnecessary troubles on the network.

Item

Operation

 

DHCP

DHCP TURN ON/TURN OFF:

DHCP

Use the ▲/▼ buttons to turn DHCP on/off

 

(Dynamic Host

TURN OFF

Configuration

TURN ON TURN OFF

 

Select TURN OFF when the network does not have DHCP

Protocol)

enabled.

 

 

 

 

Input the IP ADDRESS :

 

 

Use the ▲/▼/◄/► buttons to enter the IP

192. 168. 1. 254

 

ADDRESS. This function is available as

IP ADDRESS

IP ADDRESS

long as DHCP is set to “TURN OFF”.

 

~Note~

 

 

 

 

IP ADDRESS is a number which identifies this projector on the

 

network. You cannot have two devices with the same IP ADDRESS

 

on the same network.

 

 

Input the SUBNET MASK :

 

SUBNET MASK

Use the buttons ▲/▼/◄/► to enter the

255. 255.255. 0

same SUBNET MASK of your PC.

SUBNET MASK

 

This function is available as long as DHCP

 

 

is set to “TURN OFF”.

 

50

NETWORK Menu

NETWORK Menu (continued)

8776-RJOnly.

 

 

 

 

 

Item

 

Operation

 

 

 

 

 

 

Input the DEFAULT GATEWAY :

 

 

 

 

 

DEFAULT

Use the ▲/▼/◄/► buttons to enter the DEFAULT

 

0.

0.

0.

0

 

 

 

 

 

GATEWAY (a node on a computer network that serves

DEFAULT GATEWAY

GATEWAY

as an access point to another network) address.

 

 

 

 

 

 

 

 

 

 

 

 

This function is available as long as DHCP is set to “TURN OFF”.

 

Input the TIME DIFFERENCE :

 

6+/' &+(('4'0%'

 

 

Use the ▲/▼ buttons to enter the TIME

 

 

 

 

 

TIME

DIFFERENCE.

 

 

 

 

 

Set the same TIME DIFFERENCE as that on your

 

 

 

 

 

DIFFERENCE

 

 

 

 

 

PC. If unsure, ask your network administrator.

 

 

 

 

 

 

 

 

 

 

 

 

Use the ◄ button to return to the menu

 

 

 

 

 

 

after setting the TIME DIFFERENCE.

 

 

 

 

 

 

 

 

 

 

 

Input DATE AND TIME :

 

 

 

 

 

 

Use the ▲/▼/◄/► buttons to enter the Year (last two digits),

 

 

Month, Date, Hour and Minute.

 

 

 

 

 

DATE AND TIME

~Note~

 

 

DATE AND TIME

 

The projector will override this setting and retrieve

 

information from the Timeserver when SNTP is enabled. See [Date/

 

Time Settings] in [User’s Manual - Network Functions: Configuring

 

and Controlling the Projector via a Web Browser] for SNTP settings.

 

e-SHOTdisplay :

 

 

 

 

 

 

Use the ▲/▼ buttons to select an item and the ► or ENTER

 

 

buttons to display the image.

 

 

 

 

 

 

Image1

G 5*16

 

 

 

 

 

 

Image2

+/#)' &'/10564#6+10

 

 

 

 

 

 

0'9+/#)' 24'5'06#6+10(+.'

 

 

 

 

 

 

Image3

 

 

 

 

 

 

+/#)' &'/10564#6+10

 

 

 

 

 

 

Image4

+/#)' 6#$.'

 

 

 

 

 

 

 

 

 

 

 

 

 

File names of registered images are

 

 

 

 

 

 

displayed by 16 characters or less.

 

 

 

 

 

 

Example: DEMONSTRATION-01

 

 

 

 

 

 

"NEW" stamp is added to the head of line when

 

 

 

 

 

e-SHOT

the image is registered newly. After the image

 

 

 

IMAGE 1

 

is displayed, "NEW" stamp will be erased.

 

 

 

 

 

 

Once an image is displayed, you can use the

e SHOT

 

 

 

 

 

 

 

 

 

 

 

▲/▼ buttons to page through the images. Use

RESET : IMAGE 1

 

 

 

 

the ◄ or ESC buttons to return to the menu.

ESC,

+ :NO

ENTER

:YES

 

Pressing the RESET button on the remote control while an image is

 

being displayed will display the RESET menu. The displayed image

 

can be deleted from the RESET menu using the ENTER button on

 

the remote control or the INPUT button on the projector.

 

 

 

If you do not wish to delete the image use the ESC button on the remote

 

control or push the ◄ and INPUT buttons on the projector at the same time.

~Note~

Items with no image stored cannot be selected.

Images can be changed using the ▲/▼ buttons while the image data downloads.

51

NETWORK Menu

NETWORK Menu (continued) RJ Model Only.

Item

Operation

 

 

 

 

 

INFORMATION display :

0'6914-+0(14/#6+10

 

Use the ► or ENTER buttons to view

0#/'

 

network information and confirm settings.

+2 #&&4'55

 

57$0'6/#5-

 

 

&'(#7.6 )#6'9#;

 

 

/#% #&&4'55 #% %

 

 

6+/' &+(('4'0%' )/6

 

 

' #0& 6+/'

INFORMATION ~Note~

Only the first 16 characters of the projector name are displayed.

When the voltage level of battery for built in clock decreases, set time may become incorrect even though accurate date and time are

input.

Replace a battery through the following the instructions. (57)

Excuting this item restarts and initializes the Network Function.

Choose the RESTART using the button ►.

5'48+%'

4'56#46

Then use the button ▲ to execute.

SERVICE

4'56#46

':'%76'

%#0%'.

Network will be once cut off when choose restart.

If DHCP is selected on, IP address may be changed.

After selecting RESTART, Network menu may not be controlled approx. 30 seconds.

Network Functions

Refer to the separate volume on Network Functions.

52

Maintenance

Maintenance

Lamp

WARNING

HIGH VOLTAGE

 

HIGH TEMPERATURE

HIGH PRESSURE

 

►The projector uses a high-pressuremercury glass lamp. The lamp canbreak

with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible forshards of glass to fly into the lamp housing, and forgas containing mercury to escape from the projector’s vent holes.

About disposal of a lamp • This product contains a mercury lamp; do not

put it in a trash. Dispose of it in accordance with environmental laws. For lamp recycling, go to www.lamprecycle.org. (in the US)

For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).

For more information, call your dealer.

• If the lamp should break (it will make a loud bang when it does), unplug

the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the inside of the projector, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.

Disconnect • If the lamp should break (it will make a loud bang when it does),

the plug

ventilate the room well, and make sure not to breathe the gas that

from the

comes out of the projector vents, or get it in your eyes or mouth.

power

• Before replacing the lamp, turn the projector off and unplug the power

outlet

cord, then wait at least 45 minutes for the lamp to cool sufficiently.

 

Handling the lamp while hot can cause burns, as well as damaging the

 

lamp.

Never unscrew except the appointed (marked by an arrow) screws.

Do not open the lamp cover while the projector is suspended from the ceiling. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken.

Do not use the projector with the lamp cover removed. To replace the lamp, make sure that the screws are tightened firmly. Loose screws could result in damage or injury.

Use only the lamp of the specified type.

If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.

Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

Using the lamp for long periods of time, could cause it dark, not to light up or to burst. When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage.

53

6.
7.
1.
2.

Maintenance

Lamp (continued)

A lamp has a finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.

To prepare a new lamp, contact your dealer and tell the lamp type number.

Type number = 456-8776and456-8755E.

Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes.

Prepare a new lamp.

If the projector is mounted on the ceiling, or if the lamp the dealer to replace the lamp.

In the case of replacement by yourself,

has broken, also ask

Lamp cover

3. Loosen the lamp cover screw (marked by arrow) and then slide the lamp cover to the side to

remove it.

4. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handles.

5. Insert the new lamp, and retighten firmly the two screws that are loosened in the previous process

to lock it in place.

Slide the lamp cover back in place and firmly fasten the lamp cover a screw.

Turn the projector on and reset the lamp time using the LAMP TIME function in the OPTION

menu (41).

(1)Press the MENU button to display a menu. Only when the EASY MENU has appeared, please perform the next step (2).

(2)Point at the “Go to Advanced Menu …” in the menu using ▼/▲ button, then press the ► button.

(3)Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press the ► button.

(4)Point at the ”LAMP TIME” using ▼/▲ button, then press the ► button. A dialog will appear.

(5)Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp time.

C/P

C /P

VIDEO S-VIDEO

 

A

RGB

IN1

A

UDIO

UDIO IN2

IN1

 

 

 

RGB IN2

 

 

 

CO

 

 

 

NTROL

LAN

RGBOUT

AUDIO OUT

USB

Screw

Screws

Handle

NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

54

Maintenance

Air filter

WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector.

►Use only the air filter of the specified type. Do not use the projector with the air filter and the filter cover removed. It could result in a fire and/or malfunction to the projector.

►The air filter should be cleaned periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector.

NOTE • Please replace the air filter when it is damaged or too soiled, and also when you replace the lamp.

Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. (41)

The projector may display the message such as “CHECK THE AIR FLOW” or turn off the projector, to prevent the internal heat level rising.

If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector. When the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible.

Please check and clean the air filter periodically, even if there is no message.

Please replace the air filter when it is damaged or too soiled. Preparation of a new air filter is recommended.

To prepare a new air filter, contact your dealer and tell the air filter type number.

Type number = NJ22222

And also when you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector.

1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at

least 45 minutes.

2. When the projector is suspended from the ceiling, apply the vacuum cleaner to

and around the filter cover first, to prevent penetration of dust or the like.

3. While supporting the projector with one hand, use your other hand to pull the filter cover forward in the direction of the arrow.

Remove the air filter.

Handle

Filter cover

55

Maintenance

Air filter (continued)

4. Apply a vacuum cleaner to the air filter and the filter cover. Please replace the air filter when it is damaged or too soiled.

5. Replace the air filter in its original position. Secure the air filter in place by pressing each of the sixlocations. Make sure there is no dust or dirt remaining after the cover is in place. If any dust or dirt remains use a vacuum cleaner to remove it as when placing the filter cover on the air filter.

Reattach the filter cover to the projector by aligning the filter cover with the grooves on the projector. While holding the handle, push down on the filter cover until it locks firmly in place.

6. Turn the projector on and reset the filter time using the FILTER TIME function in the

OPTION menu (41).

Air filter’s knob

Air filter

mark

Filter cover

 

(1)Press the MENU button to display a menu. When the EASY MENU has appeared, please skip the next step (2).

(2)Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press the ► button.

(3)Point at the “FILTER TIME” using ▼/▲ button, then press the ► button. A dialog will appear.

(4)Press the ▲ button to select “RESET” on the dialog. It performs resetting the filter time.

56

Maintenance

Replacing Internal Clock battery RJ Model Only.

Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped, please replace the battery according to the following procedures.

WARNING ►Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

And also improper use may result in cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

Make sure the plus and minus terminals are correctly aligned when loading a battery.

If the battery is placed in the battery holder upside-down,it may be hard to remove.

Keep a battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

Do not short circuit or solder a battery.

Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the liquid adheres to your body or clothes, rinse well with water immediately.

Obey the local laws on disposing the battery.

1.

Turn the projector off, and unplug the power cord. Allow the

 

projector to cool sufficiently.

 

2.

After making sure that the projector has cooled adequately,

 

slowly turn over the projector, so that the bottom is facing.

 

3.

Remove the battery cover.

Battery Cover

Turn the battery cover in the direction indicated “OPEN”

 

using such as coins. Then the battery cover will come up. While

 

removing the battery cover, pick its knob.

OPEN

4.

Take the old battery out.

Knob

 

Press the metal claw of the battery holder. Then the battery

Metal claw

will come up. Remove the battery.

 

5.

Put a new battery in.

 

Replace battery with HITACHI MAXELL, Part No.CR2032

 

only. Use of another battery may present a risk of fire or

 

explosion.

“+” marking

Insert a new battery in the battery holder according to its minus terminal

 

as indicated in the battery holder, so that the side marked by + is

 

facing. And push the battery into the battery holder fully to fix.

 

6.

Close the battery cover.

CLOSE

 

Replace the battery cover in place, then turn it in the

 

direction indicated “CLOSE” using such as coins, to fix.

If the battery is placed in the battery holder upside-down,follow the procedure below to remove and reload it properly.

1.Remove the battery cover as described in steps 1 through 3 above.

2.Turn the projector over again, so that the top of the projector is facing up.

3.While lifting the side of the projector closest to the lens, press the metal claw of the battery holder. The battery will fall out of the holder, so be careful not to lose it.

4.Turn the projector over once more, so that the bottom faces up, and reload the battery correctly.

NOTE • The internal clock’s time will be reset when the battery is removed.

Please reconfigure the time via the menu or a web browser after replacing the battery.

(Please refer to 51 and User’sManual-NetworkFunctions: Date/Time Settings for more information.)

57

58
After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc.
►Do not use cleaner or chemicals other than those listed below. ►Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of handling.

Maintenance

Other care

WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently.

The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and/or malfunction to the projector.

Do not put a container containing water, cleaner or chemicals near the projector.

Do not use aerosols or sprays.

Troubleshooting

Troubleshooting

Related messages

When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below. If the same message is displayed after the remedy, or if a message other than the following appears, please contact your dealer or service company.

Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

Message

Description

 

 

NO INPUT IS DETECTED

There is no input signal.

Please confirm the signal input connection, and the status



 

of the signal source.

SYNC IS OUT OF RANGE

The horizontal or vertical frequency of the input signal

is not within the specified range.



fH kHz fVHz

Please confirm the specs for your projector or the signal

 

source specs.

 

The internal temperature is rising.

 

Please turn the power off, and allow the projector to cool

 

down at least 20 minutes. After having confirmed the

 

following items, please turn the power ON again.

CHECK THE AIR FLOW

• Is there blockage of the air passage aperture?

 

• Is the air filter dirty?

 

• Does the peripheral temperature exceed 35°C?

 

If the same indication is displayed after the remedy, please set

 

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

REMINDER

A note of precaution when cleaning the air filter.

*** HRS PASSED AFTER THE

Please immediately turn the power off, and clean or change

LAST FILTER CHECK.

the air filter referring to the “Air Filter” section of this manual

FILTER MAINTENANCE IS ESSENTIAL

(55). After you have cleaned or changed the air filter,

TO REMOVE WARNING MESSAGE,

please be sure to reset the filter timer (41).

RESET FILTER TIMER.

 

SEE MANUAL FURTHER INFO.

 

59

Troubleshooting

Regarding the indicator lamps

Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company.

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

Lighting

Turned

Turned

The projector is in a standby state.

In Orange

off

off

Please refer to the section “Power On/Off”.

Blinking

Turned

Turned

The projector is warming up.

In Green

off

off

Please wait.

Lighting

Turned

Turned

The projector is in an on state.

In Green

off

off

Ordinary operations may be performed.

Blinking

Turned

Turned

The projector is cooling down.

In Orange

off

off

Please wait.

 

 

 

The projector is cooling down. A certain error

Blinking

(discre-

(discre-

has been detected.

In Red

tionary)

tionary)

Please wait until the POWER indicator finishes

 

 

 

blinking, and then perform the proper measure using

 

 

 

the item descriptions below.

 

 

 

The lamp does not light, and there is a

 

 

 

possibility that interior portion has become

 

 

 

heated.

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 20 minutes. After the projector has

In Red

 

 

Lighting

Turned

sufficiently cooled down, please make confirmation of

or

In Red

off

the following items, and then turn the power on again.

Lighting

 

 

• Is there blockage of the air passage aperture?

In Red

 

 

 

 

• Is the air filter dirty?

 

 

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

If the same indication is displayed after the remedy,

 

 

 

please change the lamp referring to the section “Lamp”.

 

 

 

The lamp cover has not been properly fixed.

 

 

 

Please turn the power off, and allow the projector to

Blinking

 

 

cool down at least 45 minutes. After the projector has

In Red

Blinking

Turned

sufficiently cooled down, please make confirmation

or

In Red

off

of the attachment state of the lamp cover. After

Lighting

performing any needed maintenance, turn the power

 

 

In Red

 

 

on again. If the same indication is displayed after

 

 

 

the remedy, please contact your dealer or service

 

 

 

company.

60

Troubleshooting

Regarding the indicator lamps (continued)

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

 

 

 

The cooling fan is not operating.

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 20 minutes. After the projector has

In Red

 

 

Turned

Blinking

sufficiently cooled down, please make confirmation

or

off

In Red

that no foreign matter has become caught in the fan,

Lighting

 

 

etc., and then turn the power on again.

In Red

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

 

 

 

please contact your dealer or service company.

 

 

 

There is a possibility that the interior portion

 

 

 

has become heated.

 

 

 

Please turn the power off, and allow the projector to

Blinking

 

 

cool down at least 20 minutes. After the projector has

 

 

sufficiently cooled down, please make confirmation of

In Red

 

 

Turned

Lighting

the following items, and then turn the power on again.

or

off

In Red

• Is there blockage of the air passage aperture?

Lighting

 

 

• Is the air filter dirty?

In Red

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

please set FAN SPEED of the SERVICE item in the

 

 

 

OPTION menu to HIGH.

 

 

 

It is time to clean the air filter.

 

 

 

Please immediately turn the power off, and clean or

Lighting

Simultaneous

change the air filter referring to the section “Air Filter”.

In Green

blinking in Red

After cleaning or changing the air filter, please be sure

 

 

 

to reset the filter timer. After the remedy, reset the

 

 

 

power to ON.

 

 

 

There is a possibility that the interior portion

Lighting

Alternative

has become overcooled.

Please use the unit within the usage temperature

In Green

blinking in Red

parameters (5°C to 35°C). After the treatment, reset

 

 

 

 

 

 

the power to ON.

Blinking in

 

 

At least 1 “Power ON” schedule is saved to the

Green for

Turned

Turned

projector.

approx. 3

off

off

(Please refer to the User’s Manual-NetworkFunctions:

seconds

 

 

Schedule Settings for more information.)

NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “” (OFF) side of the power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

61

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact

your dealer or service company.

1. Before requesting repair, please check in accordance with the following chart. This

operation sometimes resolves your problem.

CB/PB

CR/PR

RGB

LAN

IN2

If the situation cannot be corrected,

CONTROL

RGB

OUT

 

 

A

 

UDIO

 

OUT

2. The projector’s microprocessor may need to be

USB

reset. Please push the Restart switch by using a cocktail stick or similar and the projector will restart.

3. Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu(43) to reset all settings to factory default.

Then, if the problem is not removed after the remedy, please contact your dealer or service company.

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The electrical power cord is not plugged in.

14

 

Correctly connect the power cord.

 

 

 

The power switch is not set to the on position.

17

 

Set the power switch to [ | ] (On).

 

 

 

The main power source has been interrupted during

 

Power does not

operation such as by a power outage (blackout), etc.

17

Please turn the power off, and allow the projector to cool

come on.

down at least 2 minutes, then turn the power on again.

 

 

 

 

Either there is no lamp and/or lamp cover, or either

 

 

of these has not been properly fixed.

 

 

Please turn the power off, and allow the projector to cool down

53, 54

 

at least 45 minutes. After the projector has sufficiently cooled

 

 

 

down, please make confirmation of the attachment state of the

 

 

lamp and lamp cover, and then turn the power on again.

 

 

The signal cables are not correctly connected.

12, 13

 

Correctly connect the connection cables.

 

 

Neither sounds

Signal source does not correctly work.

 

nor pictures are

Correctly set up the signal source device by referring to the

outputted.

manual of the source device.

 

 

The input changeover settings are mismatched.

18, 19

 

Select the input signal, and correct the settings.

 

 

62

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The signal cables are not correctly connected.

12,13

 

Correctly connect the audio cables.

 

 

 

The MUTE function is working.

18

 

Restore the sound pressing the MUTE or VOLUME button

Sound does not

on the remote control.

 

come out.

The volume is adjusted to an extremely low level.

18

 

Adjust the volume to a higher level using the menu function

 

or the remote control.

 

 

The AUDIO setting is not correct.

36

 

Correctly set the AUDIO item in the SETUP menu.

 

 

 

The lens cap is attached.

17

 

Remove the lens cover.

 

 

 

The signal cables are not correctly connected.

12, 13

 

Correctly connect the connection cables.

 

 

 

The brightness is adjusted to an extremely low level.

25

No pictures are

Adjust BRIGHTNESS to a higher level using the menu

function or the remote control.

 

displayed.

 

The computer cannot detect the projector as a plug

 

 

 

 

and play monitor.

11

 

Make sure that the computer can detect a plug and play

 

 

 

monitor using another plug and play monitor.

 

 

The BLANK screen is displayed.

22

 

Press the BLANK button on the remote control.

 

 

Video screen

The FREEZE function is working.

22

display freezes.

Press the FREEZE button to restore the screen to normal.

 

 

Color settings are not correctly adjusted.

26, 28,

Colors have a

Perform picture adjustments by changing the COLOR

fadedout

TEMP, COLOR, TINT and/or COLOR SPACE settings,

32

appearance, or

using the menu functions.

 

Color tone is

COLOR SPACE setting is not suitable.

 

poor.

Change the COLOR SPACE setting to AUTO, RGB,

32

 

SMPTE240, REC709 or REC601.

 

63

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The brightness and/or contrast are adjusted to an

 

 

extremely low level.

25, 26

 

Adjust BRIGHTNESS and/or CONTRAST settings to a

 

 

 

higher level using the menu function.

 

Pictures appear

The WHISPER function is working.

 

dark.

Select NORMAL for the WHISPER item in the SETUP

26, 35

 

menu.

 

 

The lamp is approaching the end of its product

 

 

lifetime.

53, 54

 

Replace the lamp.

 

 

Either the focus and/or horizontal phase settings are

 

 

not properly adjusted.

19, 30

Pictures appear

Adjust the focus using the focus ring, and/or H PHASE

 

blurry.

using the menu function.

 

 

The lens is dirty or misty.

58

 

Clean the lens referring to the section “Caring for the lens”.

 

 

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

64

Warranty And After-Service

Warranty and after-service

If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Specifications

Specifications

NOTE • These specifications are subject to change without notice.

 

 

Item

Specification

 

 

Product name

Liquid crystal projector

Liquid

 

Panel size

1.6 cm (0.63 type)

Crystal

Drive system

TFT active matrix

panel

 

 

 

 

Pixels

786,432 pixels (1024 horizontal x 768 vertical)

 

 

Lens

 

Zoom lens F=1.7 ~ 1.9 f=18.9 ~ 22.6 mm

Lamp

 

200W UHB

Speaker

 

1W x 1

Power Supply

AC100-120V/3.5A,AC220-240V/1.5A

Power Consumption

330W

Temperature range

5 ~ 35°C (Operating)

 

 

306 (W) x 86 (H) x 249 (D) mm, RJ is 106 (H) mm.

Size

 

(Not including protruding parts)

 

 

 

 

• Please refer to the following figure.

 

Weight (mass)

3.3 kg

 

 

 

 

 

RGB input:

Video input:

 

 

 

RGB IN1...

D-sub15pin mini x1

COMPONENT VIDEO

 

 

RGB IN2...

D-sub15pin mini x1

(Y, CB/PB, CR/PR)...... RCA x3

 

 

RGB output:

S-Video ................

Mini DIN x1

 

 

RGB OUT..D-sub15pin mini x1

Video...........................

RCA x1

Ports

 

Audio input:

Communication port:

 

 

AUDIO 1............

Stereo mini x1

CONTROL............

D-sub9pin x1

 

 

AUDIO 2............

Stereo mini x1

USB.........................

USB(B) x1

 

 

AUDIO 3......................

RCA x2

LAN...........................

RJ-45x1

 

 

Audio output:

 

 

 

 

AUDIO OUT .....Stereo mini x1

 

 

Optional

Lamp

456-8776,8755E-RJis456-8755E

 

Air filter

NJ22222

 

 

 

parts

 

 

 

 

 

Others

• Please consult your dealer.

 

 

 

 

 

65

Specifications

Specifications (continued)

 

 

 

S-VIDEO

 

USB

 

 

 

VIDEO

 

 

CONTROL

 

 

CR/PR

 

 

AUDIOIN2

L

 

 

 

 

 

AUDIOIN1

B

B

C

 

 

 

 

/P

RGBOUTAUDIOOUT

RGBIN2

RGBIN1

 

 

 

 

 

 

 

R

Y

 

 

 

AUDIOIN3

 

 

 

LAN

 

 

 

 

 

 

249 mm

IN AC

 

306 mm

106 mm

120 mm

Note: The non RJ Model (8776) is 86 and 100mm high.

66

Projector

8755E-RJ,8776 &8776-RJ

User's Manual – Operating Guide

Technical

Example of computer signal

Resolution (H x V)

H. frequency (kHz)

V. frequency (Hz)

Rating

Signal mode

 

 

 

 

 

 

 

 

 

 

7 0 x 400

37.9

85.0

VESA

TEXT

640 x 480

31.5

59.9

VESA

VGA (60Hz)

640 x 480

37.9

7 .8

VESA

VGA (7 Hz)

640 x 480

37.5

75.0

VESA

VGA (75Hz)

640 x 480

43.3

85.0

VESA

VGA (85Hz)

800 x 600

35.

56.3

VESA

SVGA (56Hz)

800 x 600

37.9

60.3

VESA

SVGA (60Hz)

800 x 600

48.1

7 .

VESA

SVGA (7 Hz)

800 x 600

46.9

75.0

VESA

SVGA (75Hz)

800 x 600

53.7

85.1

VESA

SVGA (85Hz)

83 x 6 4

49.7

74.5

 

Mac 16” mode

10 4 x 768

48.4

60.0

VESA

XGA (60Hz)

10 4 x 768

56.5

70.1

VESA

XGA (70Hz)

10 4 x 768

60.0

75.0

VESA

XGA (75Hz)

10 4 x 768

68.7

85.0

VESA

XGA (85Hz)

115 x 864

67.5

75.0

VESA

115 x 864 (75Hz)

1 80 x 960

60.0

60.0

VESA

1 80 x 960 (60Hz)

1 80 x 10 4

64.0

60.0

VESA

SXGA (60Hz)

1 80 x 10 4

80.0

75.0

VESA

SXGA (75Hz)

1 80 x 10 4

91.1

85.0

VESA

SXGA (85Hz)

1600 x 1 00

75.0

60.0

VESA

UXGA (60Hz)

1 80 x 768

47.7

60.0

VESA

W-XGA(60Hz)

1400 x 1050

65.

60.0

VESA

SXGA+ (60Hz)

NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.

Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

Depending on the input signal, full-sizedisplay may not be possible in some cases. Refer to the number of display pixels above.

Although the projector can display signals with resolution up to UXGA (1600x1 00), the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical.

Automatically adjustment may not function correctly with some input signals.

The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.

Example of computer signal

Initialset signals

The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu.

Back porch (B)

Front porch (D)

Back porch (b)

Front porch (d)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Data

 

 

Display interval (C)

 

 

 

Data

 

 

 

 

 

Display interval (c)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H. Sync.

 

 

 

 

V. Sync.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sync (A)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sync (a)

 

 

 

 

 

 

Computer/

Horizontal signal timing (μs)

Signal

(A)

(B)

(C)

(D)

 

 

 

 

 

TEXT

.0

3.0

0.3

1.0

VGA (60Hz)

3.8

1.9

5.4

0.6

VGA (7 Hz)

1.3

4.1

0.3

0.8

VGA (75Hz)

.0

3.8

0.3

0.5

VGA (85Hz)

1.6

.

17.8

1.6

SVGA (56Hz)

.0

3.6

.

0.7

SVGA (60Hz)

3.

.

0.0

1.0

SVGA (7 Hz)

.4

1.3

16.0

1.1

SVGA (75Hz)

1.6

3.

16.

0.3

SVGA (85Hz)

1.1

.7

14.

0.6

Mac 16" mode

1.1

3.9

14.5

0.6

XGA (60Hz)

.1

.5

15.8

0.4

XGA (70Hz)

1.8

1.9

13.7

0.3

XGA (75Hz)

1.

.

13.0

0.

XGA (85Hz)

1.0

.

10.8

0.5

115 x 864

1.

.4

10.7

0.6

(75Hz)

 

 

 

 

1 80 x 960

1.0

.9

11.9

0.9

(60Hz)

 

 

 

 

SXGA (60Hz)

1.0

.3

11.9

0.4

SXGA (75Hz)

1.1

1.8

9.5

0.1

SXGA (85Hz)

1.0

1.4

8.1

0.4

UXGA (60Hz)

1.

1.9

9.9

0.4

W-XGA(60Hz)

1.7

.5

16.0

0.8

SXGA+ (60Hz)

1.

.0

11.4

0.7

Computer/

Vertical signal timing (lines)

Signal

(a)

(b)

(c)

(d)

 

 

 

 

 

TEXT

3

4

400

1

VGA (60Hz)

 

33

480

10

VGA (7 Hz)

3

8

480

9

VGA (75Hz)

3

16

480

1

VGA (85Hz)

3

5

480

1

SVGA (56Hz)

 

 

600

1

SVGA (60Hz)

4

3

600

1

SVGA (7 Hz)

6

3

600

37

SVGA (75Hz)

3

1

600

1

SVGA (85Hz)

3

7

600

1

Mac 16" mode

3

39

6 4

1

XGA (60Hz)

6

9

768

3

XGA (70Hz)

6

9

768

3

XGA (75Hz)

3

8

768

1

XGA (85Hz)

3

36

768

1

115 x 864

3

3

864

1

(75Hz)

 

 

 

 

1 80 x 960

3

36

960

1

(60Hz)

 

 

 

 

SXGA(60Hz)

3

38

10 4

1

SXGA (75Hz)

3

38

10 4

1

SXGA (85Hz)

3

44

10 4

1

UXGA (60Hz)

3

46

1 00

1

W-XGA(60Hz)

3

3

768

1

SXGA+ (60Hz)

3

33

1050

1

Connection to the ports

Connection to the ports

 

 

A

B

C

LAN

RJ Only.

 

 

 

 

Y

AUDIO IN3

 

 

 

 

R

 

 

 

 

 

 

 

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

CB/PB

L

AUDIO IN1

 

 

 

 

 

AUDIO IN2

 

 

 

 

CR/PR

 

 

 

 

 

 

K

CONTROL

USB

 

 

VIDEO

 

 

 

 

S-VIDEO

A RGB IN1,B RGB IN2,C RGB OUT

D-sub15pin mini shrink jack

Video signal: RGB separate, Analog, 0.7Vp-p,

75Ω terminated (positive)

H/V. sync. Signal: TTL level (positive/negative)

Composite sync. Signal: TTL level

 

At RGB signal

 

 

Pin

Signal

1Video Red

Video Green

3Video Blue

4(No connection)

5Ground

6Ground Red

7Ground Green

8Ground Blue

9(No connection) 10 Ground

11 (No connection)

1 A : SDA (DDC data),B /C : (No connection)

13H. sync / Composite sync.

14V. sync.

15A : SCL (DDC clock),B /C : (No connection)

5

4

3

 

 

1

 

10

9

8

7

6

15

14

13

 

1

11

Connection to the ports

 

 

 

 

 

LAN

 

AUDIO IN3

 

 

 

 

D

R

 

 

 

 

 

 

 

 

 

 

 

 

RGB IN1

RGB IN2

RGB OUT AUDIO OUT

E

L

 

AUDIO IN1

 

 

 

 

IN2

 

 

 

 

H

 

 

F

 

K

CONTROL

USB

 

 

 

 

 

 

S-VIDEO

G

 

 

 

COMPONENT VIDEO D Y,E CB/PB,F CR/PR

RCA jack x3

• System: 5 5i(480i), 5 5p(480p), 6 5i(576i), 750p(7 0p), 11 5i(1080i)

Port

Signal

 

 

Y

Component video Y, 1.0±0.1Vp-p,75Ω terminator with composite

CB/PB

Component video CB/PB,0.7±0.1Vp-p,75Ω terminator

CR/PR

Component video CR/PR,0.7±0.1Vp-p,75Ω terminator

G S-VIDEO

Mini DIN 4pin jack

1

 

3

4

Pin

Signal

1Color signal 0.286Vp-p(NTSC, burst), 75Ω terminator Color signal0.300Vp-p(PAL/SECAM, burst) 75Ω terminator

Brightness signal, 1.0Vp-p,75Ω terminator

3Ground

4Ground

H VIDEO

RCA jack

System: NTSC, PAL, SECAM, PAL-M,PAL-N,NTSC4.43

1.0±0.1Vp-p,75Ω terminator

 

 

 

 

 

Connection to the ports

 

 

 

 

 

LAN

 

I

 

 

 

 

L

IN3

 

 

 

 

 

 

 

 

M

CBK

J

IN1

RGB

O

RGB OUT AUDIO OUT

IN1

 

N

CR/PR

AUDIO IN2

 

 

 

 

K

CONTROL

USB

VIDEO

 

 

 

 

 

 

 

 

S-VIDEO

 

 

 

 

 

I AUDIO IN-1 (Ø3.5 stereo mini jack),

J AUDIOIN-2, K L AUDIO 3 L/R (RCA jack)

• 200mVrms(max.) 35kΩ termination

 

 

 

 

MAUDIO OUT (Ø3.5 stereo mini jack)

200mVrms(max.) 1kΩ output impedance

N USB

USB B type jack

O CONTROL

D-sub9pin plug

4

3

Pin

Signal

1

+5V

 

 

 

 

 

- Data

1

 

3

+ Data

4

Ground

 

 

9 8 7 6

5 4 3 1

• About the details of RS- 3 C communication, please refer to the following page.

Pin

Signal

Pin

Signal

Pin

Signal

1

(No connection)

4

(No connection)

7

RTS

 

RD

5

Ground

8

CTS

3

TD

6

(No connection)

9

(No connection)

Connection to the ports

 

 

 

 

P

 

 

 

 

LAN

 

Y

AUDIO IN3

 

 

R

 

 

 

 

 

RGB IN1

RGB IN2 RGB OUT AUDIO OUT

 

CB/PB

L

AUDIO IN1

 

 

 

AUDIO IN2

 

 

CR/PR

 

 

 

 

K

CONTROL

 

VIDEO

 

USB

 

 

 

 

 

S-VIDEO

 

 

P LAN

8776-RJOnly(RJ-45jack).

RJ-45jack

1 3 4 5 6 7 8

Pin

Signal

Pin

Signal

Pin

Signal

1

TX+

4

-

7

-

 

TX-

5

-

8

-

3

RX+

6

RX-

 

 

1..

RS-232CCommunication (continued)

RS- 3 C Communication

1

 

3

4 5

1

 

3

4 5

6

7

8

9

6

7

8

9

CONTROL port

RS- 3 C cable (Cross)

RS- 3 C port

of the projector

- (1)

(1)

CD

of the computer

 

 

 

RD ( )

 

( ) RD

 

 

TD (3)

 

(3) TD

 

 

- (4)

(4)

DTR

 

 

GND (5)

 

(5) GND

 

 

 

 

 

- (6)

(6)

DSR

 

 

RTS (7)

(7)

RTS

 

 

CTS (8)

(8)

DTS

 

 

- (9)

(9)

RI

 

Connecting the cable

Turn off the projector and the computer.

Connect the CONTROL port of the projector with a RS- 3 C port of the computer by a RS- 3 C cable (cross). Use the cable that fulfills the

specification shown in the previous page.

3. Turn the computer on, and after the computer has started up turn the projector on.

Communications setting

19 00bps, 8N1

1 . Protocol

Consist of header (7 bytes) + command data (6 bytes).

2 . Header

BE + EF + 03 + 06 + 00 + CRC_low + CRC_high

CRC_low : Lower byte of CRC flag for command data CRC_high : Upper byte of CRC flag for command data

3 . Command data

Command data chart

byte_0

byte_1

byte_

byte_3

 

byte_4

byte_5

 

Action

 

 

Type

 

Setting code

 

low

high

 

low

high

 

low

 

high

 

Action (byte_0 - 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Action

Classification

 

 

Content

 

 

1

SET

 

Change setting to desired value.

 

 

GET

 

Read projector internal setup value.

 

4

INCREMENT

 

Increment setup value by 1.

 

 

5

DECREMENT

Decrement setup value by 1.

 

 

6

EXECUTE

 

Run a command.

 

 

RS-232CCommunication (continued)

Requesting projector status (Get command)

(1)Send the request code Header + Command data (‘0 H’+‘00H’+ type ( bytes)+ ‘00H’ +‘00H’) from the computer to the projector.

( ) The projector returns the response code ‘1DH’+ data ( bytes) to the computer.

Changing the projector settings (Set command)

(1)Send the setting code Header + Command data (‘01H’+‘00H’+ type ( bytes) + setting code ( bytes)) from the computer to the projector.

( ) The projector changes the setting based on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1)The computer sends the default setting code Header + Command data (‘06H’+ ‘00H’ + type ( bytes) +‘00H’+‘00H’) to the projector.

(2)The projector changes the specified setting to the default value.

(3)The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1)The computer sends the increment code Header + Command data (‘04H’+ ‘00H’+ type ( bytes) +‘00H’+‘00H’) to the projector.

( ) The projector in creases the setting value on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1)The computer sends the decrement code Header + Command data (‘05H’+ ‘00H’+ type ( bytes) +‘00H’ + ‘00H’) to the projector.

( ) The projector decreases the setting value on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

When the projector cannot understand the received command

When the projector cannot understand the received command, the error code ‘15H’ is sent back to the computer.

Sometimes the projector cannot properly receive the command. In such a case, the command is not executed and the error code ‘15H’ is sent back to the computer. If this error code is returned, send the same command again.

When the projector cannot execute the received command.

When the projector cannot execute the received command, the error code ‘1CH’ + ‘xxxxH’ is sent back to the computer. When the data length is greater than indicated by the data length code, the projector ignore the excess data code.

Conversely when the data length is shorter than indicated by the data length code, an error code will be returned to the computer.

NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data.

Provide an interval of at least 40ms between the response code and any other code.

The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.

Commands are not accepted during warm-up.

RS-232CCommunication (continued)

Names 

 

Operation Type

 

Header

 

 

 

 

 

 

 

 

Command Data

 

 

 

 

 

 

CRC

 

Action

 

Type

 

Setting Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power

Set

Turn off

BE EF

03

06

00

 

2A

D3

 

01

00

 

00

60

 

00

00

 

 

Turn on

BE EF

03

06

00

 

BA D2

 

01

00

 

00

60

 

01

00

 

 

Get

BE EF

03

06

00

 

19 D3

 

02

00

 

00

60

 

00

00

 

 

 

(Example

return)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

00 00

 

01 00

 

 

02

00

 

 

 

 

 

 

 

 

 

(Off)

 

(On)

 

 

 

(Cool down)

 

 

 

 

 

Input Source

Set

RGB IN 1

BE EF

03

06

00

 

FE D2

 

01

00

 

00

20

 

00

00

 

 

RGB IN 2

BE EF

03

06

00

 

3E

D0

 

01

00

 

00

20

 

04

00

 

 

VIDEO

BE EF

03

06

00

 

6E

D3

 

01

00

 

00

20

 

01

00

 

 

S-VIDEO

BE EF

03

06

00

 

9E

D3

 

01

00

 

00

20

 

02

00

 

 

COMPONENT

BE EF

03

06

00

 

AE D1

 

01

00

 

00

20

 

05

00

 

 

Get

BE EF

03

06

00

 

CD D2

 

02

00

 

00

20

 

00

00

Error Status

 

Get

BE EF

03

06

00

 

D9

D8

 

02

00

 

20

60

 

00

00

 

 

 

(Example

return)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

00 00

 

01 00

 

 

02

00

 

 

 

03 00

 

 

 

 

(Normal)

(Cover error)

 

 

(Fan error)

 

(Lamp error)

 

 

 

 

04 00

 

05 00

 

 

06

00

 

 

 

07 00

 

 

 

 

(Temp error)

(Air flow error)

(Lamp time error)

 

(Cool error)

 

 

 

 

08 00

 

09 00

 

 

10 00

 

 

 

 

 

 

 

 

 

(Filter error)

(Filter missing error)(Inner Sencer error)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BRIGHTNESS

 

Get

BE EF

03

06

00

 

89 D2

 

02

00

 

03

20

 

00 00

 

 

Increment

BE EF

03

06

00

 

EF D2

 

04

00

 

03

20

 

00

00

 

 

Decrement

BE EF

03

06

00

 

3E

D3

 

05

00

 

03 20

 

00

00

BRIGHTNESS Reset

 

Execute

BE EF

03

06

00

 

58 D3

 

06

00

 

00

70

 

00

00

CONTRAST

 

Get

BE EF

03

06

00

 

FD D3

 

02

00

 

04

20

 

00

00

 

 

Increment

BE EF

03

06

00

 

9B

D3

 

04

00

 

04

20

 

00

00

 

 

Decrement

BE EF

03

06

00

 

4A

D2

 

05

00

 

04

20

 

00

00

CONTRAST Reset

 

Execute

BE EF

03

06

00

 

A4

D2

 

06

00

 

01

70

 

00

00

PICTURE MODE

Set

NORMAL

BE EF

03

06

00

 

23

F6

 

01

00

 

BA 30

 

00 00

 

 

CINEMA

BE EF

03

06

00

 

B3 F7

 

01

00

 

BA 30

 

01 00

 

 

DYNAMIC

BE EF

03

06

00

 

E3 F4

 

01 00

 

BA 30

 

04 00

 

 

BOARD(BLACK)

BE EF

03

06

00

 

E3 EF

 

01 00

 

BA 30

 

20 00

 

 

BOARD(GREEN)

BE EF

03

06

00

 

73 EE

 

01 00

 

BA 30

 

21 00

 

 

WHITEBOARD

BE EF

03

06

00

 

83 EE

 

01 00

 

BA 30

 

22 00

 

 

Get

BE EF

03

06

00

 

10

F6

 

02

00

 

BA 30

 

00 00

 

 

 

(Example

return)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

00 00

01

00

04 00

 

10 00

 

 

 

 

 

 

 

 

 

 

(Normal)

(Cinema)

(Dynamic)

(Custom)

 

 

 

 

 

 

 

 

20 00

 

21 00

 

 

 

22 00

 

 

 

 

 

 

 

 

BOARD(BLACK)

BOARD(GREEN)

 

(WHITEBOARD)

 

 

 

 

GAMMA

Set

#1 DEFAULT

BE EF

03

06

00

 

07 E9

 

01

00

 

A1 30

 

20 00

 

 

#1 CUSTOM

BE EF

03

06

00

 

07 FD

 

01

00

 

A1 30

 

10

00

 

 

#2 DEFAULT

BE EF

03

06

00

 

97 E8

 

01

00

 

A1 30

 

21

00

 

 

#2 CUSTOM

BE EF

03

06

00

 

97 FC

 

01

00

 

A1 30

 

11 00

 

 

#3 DEFAULT

BE EF

03

06

00

 

67 E8

 

01 00

 

A1 30

 

22

00

 

 

#3 CUSTOM

BE EF

03

06

00

 

67 FC

 

01

00

 

A1 30

 

12

00

 

 

#4 DEFAULT

BE EF

03

06

00

 

F7 E9

 

01 00

 

A1 30

 

23 00

 

 

#4 CUSTOM

BE EF

03

06

00

 

F7 FD

 

01 00

 

A1 30

 

13 00

 

 

#5 DEFAULT

BE EF

03

06

00

 

C7 EB

 

01 00

 

A1 30

 

24 00

 

 

#5 CUSTOM

BE EF

03

06

00

 

C7 FF

 

01 00

 

A1 30

 

14 00

 

 

Get

BE EF

03

06 00

 

F4 F0

 

02

00

 

A1 30

 

00

00

RS-232CCommunication (continued)

Names 

 

Operation Type

 

Header

 

 

 

 

 

 

Command Data

 

 

 

 

 

CRC

Action

Type

Setting Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

User Gamma Pattern

Set

Off

BE EF

03

06

00

FB FA

01

00

80

30

00

00

 

 

9 step gray scale

BE EF

03

06

00

6B

FB

01

00

80

30

01

00

 

 

15 steps gray scale

BE EF

03

06

00

9B

FB

01

00

80

30

02

00

 

 

Ramp

BE EF

03

06

00

0B

FA

01

00

80

30

03

00

 

 

Get

BE EF

03

06

00

C8 FA

02

00

80

30

00

00

User Gamma Point 1

 

Get

BE EF

03

06

00

08 FE

02

00

90

30

00

00

 

 

Increment

BE EF

03

06

00

6E

FE

04

00

90

30

00

00

 

 

Decrement

BE EF

03

06

00

BF FF

05

00

90

30

00

00

User Gamma Point 2

 

Get

BE EF

03

06

00

F4

FF

02

00

91

30

00

00

 

 

Increment

BE EF

03

06

00

92

FF

04

00

91

30

00

00

 

 

Decrement

BE EF

03

06

00

43 FE

05

00

91

30

00

00

User Gamma Point 3

 

Get

BE EF

03

06

00

B0

FF

02

00

92

30

00

00

 

 

Increment

BE EF

03

06

00

D6

FF

04

00

92

30

00

00

 

 

Decrement

BE EF

03

06

00

07 FE

05

00

92

30

00

00

User Gamma Point 4

 

Get

BE EF

03

06

00

4C

FE

02

00

93

30

00

00

 

 

Increment

BE EF

03

06

00

2A

FE

04

00

93

30

00

00

 

 

Decrement

BE EF

03

06

00

FB FF

05

00

93

30

00

00

User Gamma Point 5

 

Get

BE EF

03

06

00

38

FF

02

00

94

30

00

00

 

 

Increment

BE EF

03

06

00

5E

FF

04

00

94

30

00

00

 

 

Decrement

BE EF

03

06

00

8F

FE

05

00

94

30

00

00

User Gamma Point 6

 

Get

BE EF

03

06

00

C4

FE

02

00

95

30

00

00

 

 

Increment

BE EF

03

06

00

A2

FE

04

00

95

30

00

00

 

 

Decrement

BE EF

03

06

00

73

FF

05

00

95

30

00

00

User Gamma Point 7

 

Get

BE EF

03

06

00

80 FE

02

00

96

30

00

00

 

 

Increment

BE EF

03

06

00

E6

FE

04

00

96

30

00

00

 

 

Decrement

BE EF

03

06

00

37

FF

05

00

96

30

00

00

User Gamma Point 8

 

Get

BE EF

03

06

00

7C

FF

02

00

97

30

00

00

 

 

Increment

BE EF

03

06

00

1A

FF

04

00

97

30

00

00

 

 

Decrement

BE EF

03

06

00

CB FE

05

00

97

30

00

00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COLOR TEMP

Set

LOW

BE EF

03

06

00

6B

F4

01

00

B0 30

01

00

 

 

MIDDLE

BE EF

03

06

00

9B

F4

01

00

B0 30

02

00

 

 

HIGH

BE EF

03

06

00

0B

F5

01

00

B0 30

03

00

 

 

Hi-BRIGHT-1

BE EF

03

06

00

3B

F2

01

00

B0 30

08

00

 

 

Hi-BRIGHT-2

BE EF

03

06

00

AB F3

01 00

B0 30

09

00

 

 

CUSTOM-LOW

BE EF

03

06

00

AB F9

01

00

B0 30

11 00

 

 

CUSTOM-MID

BE EF

03

06

00

5B F9

01

00

B0 30

12

00

 

 

CUSTOM-HIGH

BE EF

03

06

00

CB F8

01

00

B0 30

13

00

 

 

CUSTOM-Hi-BRIGHT-1

BE EF

03

06

00

FB FF

01

00

B0 30

18

00

 

 

CUSTOM-Hi-BRIGHT-2

BE EF

03

06

00

6B FE

01 00

B0 30

19

00

 

 

Get

BE EF

03

06

00

C8 F5

02

00

B0 30

00

00

COLOR TEMP GAIN R

 

Get

BE EF

03

06

00

34

F4

02

00

B1 30

00

00

 

 

Increment

BE EF

03

06

00

52

F4

04

00

B1 30

00

00

 

 

Decrement

BE EF

03

06

00

83

F5

05

00

B1 30

00

00

10

RS-232CCommunication (continued)

Names 

 

Operation Type

 

Header

 

 

 

 

 

 

Command Data

 

 

 

 

 

CRC

Action

Type

Setting Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COLOR TEMP GAIN G

 

Get

BE EF

03

06

00

70

F4

02

00

B2 30

00

00

 

 

Increment

BE EF

03

06

00

16

F4

04

00

B2 30

00

00

 

 

Decrement

BE EF

03

06

00

C7 F5

05

00

B2 30

00

00

COLOR TEMP GAIN B

 

Get

BE EF

03

06

00

8C F5

02

00

B3 30

00

00

 

 

Increment

BE EF

03

06

00

EA F5

04

00

B3 30

00

00

 

 

Decrement

BE EF

03

06

00

3B

F4

05

00

B3 30

00

00

COLOR TEMP

 

Get

BE EF

03

06

00

04

F5

02

00

B5 30

00

00

OFFSET R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Increment

BE EF

03

06

00

62

F5

04

00

B5 30

00

00

 

 

 

 

Decrement

BE EF

03

06

00

B3

F4

05

00

B5 30

00

00

COLOR TEMP

 

Get

BE EF

03

06

00

40

F5

02

00

B6 30

00

00

OFFSET G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Increment

BE EF

03

06

00

26

F5

04

00

B6 30

00

00

 

 

 

 

Decrement

BE EF

03

06

00

F7

F4

05

00

B6 30

00

00

COLOR TEMP

 

Get

BE EF

03

06

00

BC F4

02

00

B7 30

00

00

OFFSET B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Increment

BE EF

03

06

00

DA F4

04

00

B7 30

00

00

 

 

 

 

Decrement

BE EF

03

06

00

0B

F5

05

00

B7 30

00

00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COLOR

 

Get

BE EF

03

06

00

B5 72

02

00

02

22

00

00

 

 

Increment

BE EF

03

06

00

D3 72

04

00

02

22

00

00

 

 

Decrement

BE EF

03

06

00

02

73

05

00

02

22

00

00

COLOR Reset

 

Execute

BE EF

03

06

00

80 D0

06

00

0A 70

00

00

TINT

 

Get

BE EF

03

06

00

49

73

02

00

03

22

00

00

 

 

Increment

BE EF

03

06

00

2F

73

04

00

03

22

00

00

 

 

Decrement

BE EF

03

06

00

FE 72

05

00

03

22

00

00

TINT Reset

 

Execute

BE EF

03

06

00

7C

D1

06

00

0B 70

00

00

SHARPNESS

 

Get

BE EF

03

06

00

F1

72

02

00

01

22

00

00

 

 

Increment

BE EF

03

06

00

97

72

04

00

01

22

00

00

 

 

Decrement

BE EF

03

06

00

46

73

05

00

01

22

00

00

SHARPNESS Reset

 

Execute

BE EF

03

06

00

C4

D0

06

00

09

70

00

00

PROGRESSIVE

Set

TURN OFF

BE EF

03

06

00

4A 72

01

00

07

22

00

00

 

 

TV

BE EF

03

06

00

DA 73

01

00

07

22

01

00

 

 

FILM

BE EF

03

06

00

2A 73

01

00

07

22

02

00

 

 

Get

BE EF

03

06

00

79

72

02

00

07

22

00

00

VIDEO NR

Set

LOW

BE EF

03

06

00

26

72

01

00

06

22

01

00

 

 

MIDDLE

BE EF

03

06

00

D6 72

01

00

06

22

02

00

 

 

HIGH

BE EF

03

06

00

46

73

01

00

06

22

03

00

 

 

Get

BE EF

03

06

00

85

73

02

00

06

22

00

00

MY MEMORY Load

Set

1

BE EF

03

06

00

0E

D7

01

00

14

20

00

00

 

 

2

BE EF

03

06

00

9E

D6

01

00

14

20

01

00

 

 

3

BE EF

03

06

00

6E

D6

01

00

14

20

02

00

 

 

4

BE EF

03

06

00

FE

D7

01

00

14

20

03

00

MY MEMORY Save

Set

1

BE EF

03

06

00

F2 D6

01

00

15

20

00

00

 

 

2

BE EF

03

06

00

62 D7

01

00

15

20

01

00

 

 

3

BE EF

03

06

00

92 D7

01

00

15

20

02

00

 

 

4

BE EF

03

06

00

02 D6

01

00

15

20

03

00

11

RS-232CCommunication (continued)

Names 

 

Operation Type

 

Header

 

 

 

 

 

 

Command Data

 

 

 

 

 

CRC

Action

Type

Setting Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ASPECT

Set

4:3

BE EF

03

06

00

9E

D0

01

00

08

20

00

00

 

 

16:9

BE EF

03

06

00

0E

D1

01

00

08

20

01

00

 

 

14:9

BE EF

03

06

00

CE D6

01 00

08 20

09 00

 

 

SMALL

BE EF

03

06

00

FE

D1

01

00

08

20

02

00

 

 

NORMAL

BE EF

03

06

00

5E DD

01

00

08

20

10

00

 

 

Get

BE EF

03

06

00

AD D0

02

00

08

20

00

00

OVER SCAN

 

Get

BE EF

03

06

00

91

70

02

00

09

22

00

00

 

 

Increment

BE EF

03

06

00

F7

70

04

00

09

22

00

00

 

 

Decrement

BE EF

03

06

00

26

71

05

00

09

22

00

00

OVER SCAN Reset

 

Execute

BE EF

03

06

00

EC D9

06

00

27

70

00

00

V POSITION

 

Get

BE EF

03

06

00

0D 83

02

00

00

21

00

00

 

 

Increment

BE EF

03

06

00

6B 83

04

00

00

21

00

00

 

 

Decrement

BE EF

03

06

00

BA 82

05

00

00

21

00

00

V POSITION Reset

 

Execute

BE EF

03

06

00

E0

D2

06

00

02

70

00

00

H POSITION

 

Get

BE EF

03

06

00

F1

82

02

00

01

21

00

00

 

 

Increment

BE EF

03

06

00

97

82

04

00

01

21

00

00

 

 

Decrement

BE EF

03

06

00

46

83

05

00

01

21

00

00

H POSITION Reset

 

Execute

BE EF

03

06

00

1C

D3

06

00

03

70

00

00

H PHASE

 

Get

BE EF

03

06

00

49

83

02

00

03

21

00

00

 

 

Increment

BE EF

03

06

00

2F

83

04

00

03

21

00

00

 

 

Decrement

BE EF

03

06

00

FE 82

05

00

03

21

00

00

H SIZE

 

Get

BE EF

03

06

00

B5 82

02

00

02

21

00

00

 

 

Increment

BE EF

03

06

00

D3 82

04

00

02

21

00

00

 

 

Decrement

BE EF

03

06

00

02

83

05

00

02

21

00

00

H SIZE Reset

 

Execute

BE EF

03

06

00

68 D2

06

00

04

70

00

00

AUTO ADJUST

 

Execute

BE EF

03

06

00

91 D0

06

00

0A 20

00

00

COLOR SPACE

Set

AUTO

BE EF

03

06

00

0E 72

01

00

04

22

00

00

 

 

RGB

BE EF

03

06

00

9E 73

01

00

04

22

01

00

 

 

SMPTE240

BE EF

03

06

00

6E 73

01

00

04

22

02

00

 

 

REC709

BE EF

03

06

00

FE 72

01

00

04

22

03

00

 

 

REC601

BE EF

03

06

00

CE 70

01

00

04

22

04

00

 

 

Get

BE EF

03

06

00

3D 72

02

00

04

22

00

00

COMPONENT

Set

COMPONENT

BE EF

03

06

00

4A

D7

01

00

17

20

00

00

 

 

SCART RGB

BE EF

03

06

00

DA D6

01

00

17

20

01

00

 

 

Get

BE EF

03

06

00

79 D7

02

00

17

20

00

00

C-VIDEOFORMAT

Set

AUTO

BE EF

03

06

00

A2 70

01

00

11 22

0A 00

 

 

NTSC

BE EF

03

06

00

C2 74

01

00

11 22

04

00

 

 

PAL

BE EF

03

06

00

52

75

01

00

11 22

05

00

 

 

SECAM

BE EF

03

06

00

52

70

01

00

11 22

09

00

 

 

NTSC4.43

BE EF

03

06

00

62

77

01

00

11 22

02

00

 

 

M-PAL

BE EF

03

06

00

C2 71

01

00

11 22

08

00

 

 

N-PAL

BE EF

03

06

00

32

74

01

00

11 22

07

00

 

 

Get

BE EF

03

06

00

31

76

02

00

11 22

00

00

S-VIDEOFORMAT

Set

AUTO

BE EF

03

06

00

E6 70

01

00

12

22

0A 00

 

 

NTSC

BE EF

03

06

00

86

74

01

00

12

22

04

00

 

 

PAL

BE EF

03

06

00

16

75

01

00

12

22

05

00

 

 

SECAM

BE EF

03

06

00

16

70

01

00

12

22

09

00

 

 

NTSC4.43

BE EF

03

06

00

26

77

01

00

12

22

02

00

 

 

M-PAL

BE EF

03

06

00

86

71

01

00

12

22

08

00

 

 

N-PAL

BE EF

03

06

00

76

74

01

00

12

22

07

00

 

 

Get

BE EF

03

06

00

75

76

02

00

12

22

00

00

1

RS-232CCommunication (continued)

Names 

 

 

Operation Type

 

Header

 

 

 

 

 

Command Data

 

 

 

 

 

 

CRC

Action

Type

Setting Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FRAME LOCK

Set

 

TURN OFF

BE EF

03

06

00

CB D6

01

00

14

30

00

00

 

 

 

TURN ON

BE EF

03

06

00

5B D7

01

00

14

30

01

00

 

 

 

Get

BE EF

03

06

00

F8 D6

02

00

14

30

00

00

 

 

 

 

 

 

 

 

 

 

 

 

RGB1 IN-1

Set

 

SYNC ON G OFF

BE EF

03

06

00

5E D7

01 00

10 20

02 00

 

 

 

SYNC ON G ON

BE EF

03

06

00

CE D6

01 00

10 20

03 00

 

 

 

Get

BE EF

03

06

00

0D D6

02 00

10 20

00 00

RGB IN-2

Set

 

SYNC ON G OFF

BE EF

03

06

00

A2 D6

01 00

11 20

02 00

 

 

 

SYNC ON G ON

BE EF

03

06

00

32 D7

01 00

11 20

03 00

 

 

 

Get

BE EF

03

06

00

F1 D7

02 00

11 20

00 00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KEYSTONE V

 

 

Get

BE EF

03

06

00

B9 D3

02

00

07

20

00

00

 

 

 

Increment

BE EF

03

06

00

DF D3

04

00

07

20

00

00

 

 

 

Decrement

BE EF

03

06

00

0E D2

05

00

07

20

00

00

KEYSTONE V Reset

 

 

Execute

BE EF

03

06

00

08 D0

06

00

0C 70

00

00

WHISPER

Set

 

NORMAL

BE EF

03

06

00

3B 23

01

00

00

33

00

00

 

 

 

WHISPER

BE EF

03

06

00

AB 22

01

00

00

33

01

00

 

 

 

Get

BE EF

03

06

00

08 23

02

00

00

33

00

00

MIRROR

Set

 

NORMAL

BE EF

03

06

00

C7 D2

01

00

01

30

00

00

 

 

 

H:INVERT

BE EF

03

06

00

57 D3

01

00

01

30

01

00

 

 

 

V:INVERT

BE EF

03

06

00

A7 D3

01

00

01

30

02

00

 

 

 

H&V:INVERT

BE EF

03

06

00

37 D2

01

00

01

30

03

00

 

 

 

Get

BE EF

03

06

00

F4 D2

02

00

01

30

00

00

AUDIO - RGB1

Set

 

TURN OFF

BE EF

03

06

00

FE DD

01 00

30 20

00 00

 

 

 

Audio1

BE EF

03

06

00

6E DC

01 00

30 20

01 00

 

 

 

Audio2

BE EF

03

06

00

9E DC

01 00

30 20

02 00

 

 

 

Audio3

BE EF

03

06

00

0E DD

01 00

30 20

03 00

 

 

 

Get

BE EF

03

06

00

CD DD

02 00

30 20

00 00

AUDIO - RGB2

Set

 

TURN OFF

BE EF

03

06

00

CE DC

01 00

34 20

00 00

 

 

 

Audio1

BE EF

03

06

00

5E DD

01 00

34 20

01 00

 

 

 

Audio2

BE EF

03

06

00

AE DD

01 00

34 20

02 00

 

 

 

Audio3

BE EF

03

06

00

3E DC

01 00

34 20

03 00

 

 

 

Get

BE EF

03

06

00

FD DC

02 00

34 20

00 00

AUDIO - Video

Set

 

TURN OFF

BE EF

03

06

00

02 DC

01 00

31 20

00 00

 

 

 

Audio1

BE EF

03

06

00

92 DD

01 00

31 20

01 00

 

 

 

Audio2

BE EF

03

06

00

62 DD

01 00

31 20

02 00

 

 

 

Audio3

BE EF

03

06

00

F2 DC

01 00

31 20

03 00

 

 

 

Get

BE EF

03

06

00

31 DC

02 00

31 20

00 00

AUDIO - S-Video

Set

 

TURN OFF

BE EF

03

06

00

46 DC

01 00

32 20

00 00

 

 

 

Audio1

BE EF

03

06

00

D6 DD

01 00

32 20

01 00

 

 

 

Audio2

BE EF

03

06

00

26 DD

01 00

32 20

02 00

 

 

 

Audio3

BE EF

03

06

00

B6 DC

01 00

32 20

03 00

 

 

 

Get

BE EF

03

06

00

75 DC

02 00

32 20

00 00

AUDIO - Component

Set

 

TURN OFF

BE EF

03

06

00

32 DD

01 00

35 20

00 00

 

 

 

Audio1

BE EF

03

06

00

A2 DC

01 00

35 20

01 00

 

 

 

Audio2

BE EF

03

06

00

52 DC

01 00

35 20

02 00

 

 

 

Audio3

BE EF

03

06

00

C2 DD

01 00

35 20

03 00

 

 

 

Get

BE EF

03

06

00

01 DD

02 00

35 20

00 00

13

RS-232CCommunication (continued)

Names 

 

Operation Type

 

Header

 

 

 

 

 

 

Command Data

 

 

 

 

 

CRC

Action

Type

Setting Code

 

 

 

 

 

 

 

MUTE

Set

TURN OFF

BE EF

03

06

00

46

D3

01

00

02

20

00

00

 

 

TURN ON

BE EF

03

06

00

D6 D2

01

00

02

20

01

00

 

 

Get

BE EF

03

06

00

75

D3

02

00

02

20

00

00

LANGUAGE

Set

ENGLISH

BE EF

03

06

00

F7

D3

01

00

05

30

00

00

 

 

FRANÇAIS

BE EF

03

06

00

67

D2

01

00

05

30

01

00

 

 

DEUTSCH

BE EF

03

06

00

97

D2

01

00

05

30

02

00

 

 

ESPAÑOL

BE EF

03

06

00

07

D3

01

00

05

30

03

00

 

 

ITALIANO

BE EF

03

06

00

37

D1

01

00

05

30

04

00

 

 

NORSK

BE EF

03

06

00

A7 D0

01

00

05

30

05

00

 

 

NEDERLANDS

BE EF

03

06

00

57

D0

01

00

05

30

06

00

 

 

PORTUGUÊS

BE EF

03

06

00

C7 D1

01

00

05

30

07

00

 

 

 

BE EF

03

06

00

37

D4

01

00

05

30

08

00

 

 

 

BE EF

03

06

00

A7 D5

01

00

05

30

09

00

 

 

 

BE EF

03

06

00

37 DE

01

00

05

30

10

00

 

 

 

BE EF

03

06

00

57

D5

01

00

05

30

0A 00

 

 

SVENSKA

BE EF

03

06

00

C7 D4

01

00

05

30

0B 00

 

 

PУCCKИЙ

BE EF

03

06

00

F7

D6

01

00

05

30

0C 00

 

 

SUOMI

BE EF

03

06

00

67

D7

01

00

05

30

0D 00

 

 

POLSKI

BE EF

03

06

00

97

D7

01

00

05

30

0E 00

 

 

TÜRKÇE

BE EF

03

06

00

07

D6

01

00

05

30

0F

00

 

 

Get

BE EF

03

06

00

C4 D3

02

00

05

30

00

00

MENU POSITION H

 

Get

BE EF

03

06

00

04

D7

02

00

15

30

00

00

 

 

Increment

BE EF

03

06

00

62

D7

04

00

15

30

00

00

 

 

Decrement

BE EF

03

06

00

B3 D6

05

00

15

30

00

00

MENU POSITION H

 

Execute

BE EF

03

06

00

DC C6

06

00

43

70

00

00

Reset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU POSITION V

 

Get

BE EF

03

06

00

40

D7

02

00

16

30

00

00

 

 

Increment

BE EF

03

06

00

26

D7

04

00

16

30

00

00

 

 

Decrement

BE EF

03

06

00

F7

D6

05

00

16

30

00

00

MENU POSITION V

 

Execute

BE EF

03

06

00

A8 C7

06

00

44

70

00

00

Reset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

RS-232CCommunication (continued)

Names 

 

Operation Type

 

Header

 

 

 

 

 

Command Data

 

 

 

 

 

CRC

Action

Type

Setting Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BLANK

Set

My Screen

BE EF

03

06

00

FB CA

01

00

00

30

20

00

 

 

ORIGINAL

BE EF

03

06

00

FB E2

01

00

00

30

40

00

 

 

BLUE

BE EF

03

06

00

CB D3

01

00

00

30

03

00

 

 

WHITE

BE EF

03

06

00

6B D0

01

00

00

30

05

00

 

 

BLACK

BE EF

03

06

00

9B D0

01

00

00

30

06

00

 

 

Get

BE EF

03

06

00

08 D3

02

00

00

30

00

00

BLANK On/Off

Set

TURN OFF

BE EF

03

06

00

FB D8

01

00

20

30

00

00

 

 

TURN ON

BE EF

03

06

00

6B D9

01

00

20

30

01

00

 

 

Get

BE EF

03

06

00

C8 D8

02

00

20

30

00

00

START UP

Set

My Screen

BE EF

03

06

00

CB CB

01

00

04

30

20

00

 

 

ORIGINAL

BE EF

03

06

00

0B D2

01

00

04

30

00

00

 

 

TURN OFF

BE EF

03

06

00

9B D3

01

00

04

30

01

00

 

 

Get

BE EF

03

06

00

38 D2

02

00

04

30

00

00

My Screen LOCK

Set

TURN OFF

BE EF

03

06

00

3B EF

01

00

C0

30

00

00

 

 

TURN ON

BE EF

03

06

00

AB EE

01

00

C0

30

01

00

 

 

Get

BE EF

03

06

00

08 EF

02

00

C0

30

00

00

MESSAGE

Set

TURN OFF

BE EF

03

06

00

8F D6

01

00

17

30

00

00

 

 

TURN ON

BE EF

03

06

00

1F D7

01

00

17

30

01

00

 

 

Get

BE EF

03

06

00

BC D6

02

00

17

30

00

00

 

 

 

 

 

 

 

 

 

 

 

 

AUTO SEARCH

Set

TURN OFF

BE EF

03

06

00

B6 D6

01 00

16

20

00 00

 

 

TURN ON

BE EF

03

06

00

26 D7

01 00

16

20

01 00

 

 

Get

BE EF

03

06

00

85 D6

02 00

16 20

00 00

AUTO ON

Set

TURN OFF

BE EF

03

06

00

3B 89

01 00

20 31

00 00

 

 

TURN ON

BE EF

03

06

00

AB 88

01 00

20 31

01 00

 

 

Get

BE EF

03

06

00

08 89

02 00

20 31

00 00

AUTO KEYSTONE

 

Execute

BE EF

03

06

00

E5 D1

06 00

0D 20

00 00

EXECUTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO KEYSTONE

Set

TURN OFF

BE EF

03

06

00

EA D1

01 00

0F 20

00 00

 

 

TURN ON

BE EF

03

06

00

7A D0

01 00

0F 20

01 00

 

 

Get

BE EF

03

06

00

D9 D1

02 00

0F 20

00 00

AUTO OFF

 

Get

BE EF

03

06

00

08 86

02 00

10

31

00 00

 

 

Increment

BE EF

03

06

00

6E 86

04 00

10

31

00 00

 

 

Decrement

BE EF

03

06

00

BF 87

05 00

10

31

00 00

LAMP TIME

 

Get

BE EF

03

06

00

C2 FF

02 00

90

10

00 00

LAMP TIME Reset

 

Execute

BE EF

03

06

00

58 DC

06 00

30

70

00 00

FILTER TIME

 

Get

BE EF

03

06

00

C2 F0

02 00

A0 10

00 00

FILER TIME Reset

 

Execute

BE EF

03

06

00

98 C6

06 00

40

70

00 00

MAGNIFY

 

Get

BE EF

03

06

00

7C D2

02 00

07

30

00 00

 

 

Increment

BE EF

03

06

00

1A D2

04 00

07

30

00 00

 

 

Decrement

BE EF

03

06

00

CB D3

05 00

07

30

00 00

FREEZE

Set

NORMAL

BE EF

03

06

00

83 D2

01 00

02

30

00 00

 

 

FREEZE

BE EF

03

06

00

13 D3

01 00

02

30

01 00

 

 

Get

BE EF

03

06

00

B0 D2

02 00

02

30

00 00

15

RS-232CCommunication (continued)

Names 

 

Operation Type

 

Header

 

 

 

 

Command Data

 

 

 

 

CRC

Action

Type

Setting Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE FREQ

Set

Disable

BE EF

03

06

00

FF 3D

01 00

30 26

00 00

NORMAL

 

 

 

 

 

 

 

 

 

 

 

Enable

BE EF

03

06

00

6F 3C

01 00

30 26

01 00

 

 

 

 

Get

BE EF

03

06

00

CC 3D

02 00

30 26

00 00

REMOTE FREQ HIGH

Set

Disable

BE EF

03

06

00

03 3C

01 00

31 26

00 00

 

 

Enable

BE EF

03

06

00

93 3D

01 00

31 26

01 00

 

 

Get

BE EF

03

06

00

30 3C

02 00

31 26

00 00

MY BUTTON-1

Set

RGB1

BE EF

03

06

00

3A 33

01 00

00 36

00 00

 

 

RGB2

BE EF

03

06

00

FA 31

01 00

00 36

04 00

 

 

COMPONENT

BE EF

03

06

00

6A 30

01 00

00 36

05 00

 

 

S-VIDEO

BE EF

03

06

00

5A 32

01 00

00 36

02 00

 

 

Video

BE EF

03

06

00

AA 32

01 00

00 36

01 00

 

 

INFORMATION

BE EF

03

06

00

FA 3E

01 00

00 36

10 00

 

 

AUTO KEYSTONE

BE EF

03

06

00

6A 3F

01 00

00 36

11 00

 

 

EXECUTE

 

 

 

 

 

 

 

 

 

 

MY MEMORY

BE EF

03

06

00

9A 3F

01 00

00 36

12 00

 

 

PICTURE MODE

BE EF

03

06

00

0A 3E

01 00

00 36

13 00

 

 

FILTER RESET

BE EF

03

06

00

3A 3C

01 00

00 36

14 00

 

 

e-SHOT

BE EF

03

06

00

5A 3D

01 00

00 36

16 00

 

 

VOLUME+

BE EF

03

06

00

CA 3C

01 00

00 36

17 00

 

 

VOLUME-

BE EF

03

06

00

3A 39

01 00

00 36

18 00

 

 

Get

BE EF

03

06

00

09 33

02 00

00 36

00 00

MY BUTTON-2

Set

RGB1

BE EF

03

06

00

C6 32

01 00

01 36

00 00

 

 

RGB2

BE EF

03

06

00

06 30

01 00

01 36

04 00

 

 

COMPONENT

BE EF

03

06

00

96 31

01 00

01 36

05 00

 

 

S-VIDEO

BE EF

03

06

00

A6 33

01 00

01 36

02 00

 

 

Video

BE EF

03

06

00

56 33

01 00

01 36

01 00

 

 

INFORMATION

BE EF

03

06

00

06 3F

01 00

01 36

10 00

 

 

AUTO KEYSTONE

BE EF

03

06

00

96 3E

01 00

01 36

11 00

 

 

EXECUTE

 

 

 

 

 

 

 

 

 

 

MY MEMORY

BE EF

03

06

00

66 3E

01 00

01 36

12 00

 

 

PICTURE MODE

BE EF

03

06

00

F6 3F

01 00

01 36

13 00

 

 

FILTER RESET

BE EF

03

06

00

C6 3D

01 00

01 36

14 00

 

 

e-SHOT

BE EF

03

06

00

A6 3C

01 00

01 36

16 00

 

 

VOLUME+

BE EF

03

06

00

36 3D

01 00

01 36

17 00

 

 

VOLUME-

BE EF

03

06

00

C6 38

01 00

01 36

18 00

 

 

Get

BE EF

03

06

00

F5 32

02 00

01 36

00 00

16

RS-232CCommunication (continued)

Names 

Operation Type

 

Header

 

 

 

 

 

 

Command Data

 

 

 

 

CRC

Action

Type

Setting Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME-RGB1

Get

BE EF

03

06

00

CD CC

02

00

60

20

00

00

 

Increment

BE EF

03

06

00

AB CC

04

00

60

20

00

00

 

Decrement

BE EF

03

06

00

7A CD

05

00

60

20

00

00

VOLUME-RGB2

Get

BE EF

03

06

00

FD CD

02

00

64

20

00

00

 

Increment

BE EF

03

06

00

9B CD

04

00

64

20

00

00

 

Decrement

BE EF

03

06

00

4A CC

05

00

64

20

00

00

VOLUME-Video

Get

BE EF

03

06

00

31

CD

02

00

61

20

00

00

 

Increment

BE EF

03

06

00

57

CD

04

00

61

20

00

00

 

Decrement

BE EF

03

06

00

86

CC

05

00

61

20

00

00

VOLUME-S-Video

Get

BE EF

03

06

00

75

CD

02

00

62

20

00

00

 

Increment

BE EF

03

06

00

13

CD

04

00

62

20

00

00

 

Decrement

BE EF

03

06

00

C2 CC

05 00

62

20

00

00

VOLUME-Component

Get

BE EF

03

06

00

01

CC

02

00

65

20

00

00

 

Increment

BE EF

03

06

00

67

CC

04

00

65

20

00

00

 

Decrement

BE EF

03

06

00

B6 CD

05

00

65

20

00

00

17

Projector

8755E-RJ/8776-RJOnly

User’s Manual – Network Functions

This manual is only intended to explain Network Functions.

WARNING • Before using the network functions, read the User’s Manual carefully to ensure your projector is set up correctly.

• After reading, keep the manuals in a safe place for future reference.

NOTE • The information in this manual is subject to change without notice.

The manufacturer assumes no responsibility for any errors that may appear in this manual.

The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.

Trademark acknowledgment

Windows is a registered trademark of Microsoft Corporation.

Netscape is a registered trademark of Netscape Communications Corporation.

JavaScript is a registered trademark of Sun Microsystems, Inc.

All other trademarks are the properties of their respective owners.

Contents

Network Functions.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Settings .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Projector Control.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Failure & Warning Alerts via E-mail.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Projector Management via SNMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Controlling the Projector via Scheduling.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29e-Shot(Still Image Transfer) Display.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Command Control via the Network.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Network Functions

Network Functions

RJ Only.

This projector is equipped with the following network functions.

Configuring and Controlling the Projector via a Web Browser

You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network.

(4)

Failure & Warning Alerts via E-mail

The projector can automatically send an alert to specified e-mailaddresses when

the projector requires maintenance or has encountered an error.

(26)

Projector Management via SNMP

This projector is SNMP (Simple Network Management Protocol) compliant, allowing you to monitor it from a remote location using SNMP software. In

addition, the projector is able to send failure & warning alerts to a specified PC.

(28)

Controlling the Projector via Scheduling

You can schedule the projector to perform various functions according to the

DATE and TIME.

(29)

Still Image Transfer

The projector can display still images that are transferred via the network.

(32)

Projector Control via RS-232Cvia the Network

The projector can be controlled using RS-232Ccommands over a network.

(34)

Network Functions

Before using the network functions…

To use the network functions of this projector, the projector must be configured to suit your network. Consult with your network administrator before connecting the projector to your network. Incorrect network configuration of this projector may cause problems on your network.

Connect to the Gateway (The router/PC that forwards traffic to a destination outside of the subnet of the transmitting device) from the network terminal on the projector using a CAT-5cable and configure the following settings.

If using a network with DHCP enabled:

The projector’s network settings can be configured automatically. when [DHCP] on the network menu is set to[TURN ON]. Please refer to DHCP in network menu. If a fixed / static IP address is required, please configure your projector according to the steps in the following section.

If using a network system that does not have DHCP enabled or if using a fixed IP address on a network system equipped with DHCP enabled:

Configure the following settings on the network menu.

1. [DHCP]: Disable DHCP (Set[DHCP] to[TURN OFF]).

2. [IP ADDRESS]: Enter an appropriate IP address for the projector to connect to your network.

3. [SUBNET MASK]: Enter an appropriate SUBNETMASK for the projector to connect to your network.

4. [DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that forwards traffic to a destination outside of the subnet of the transmitting device) address for the projector to connect to your network.

Network Functions

Configuring and controlling the projector via a web browser

You can adjust or control the projector via a network from a web browser on a PC that is connected to the same network.

NOTE • Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required.

If JavaScript is disabled in your web browser configuration, you must enable JavaScript in order to use the projector web pages properly. See the Help files for your web browser for details on how to enable JavaScript.

This projector is SSL (Secure Socket Layer) compliant. Please specify “https://” when the entering the projector address.

If no operations are performed via a web browser for approx. 50 seconds the system will automatically log off. Please Re-logon to continue operations via a web browser.

After you logon, a small, blank window will appear behind the main operation window. Please do not close this small, blank window. If this window is closed, the system will automatically log off after certain period of time even if an operation is being performed.

The small, blank window will close when the main operation window is closed.

The small, blank window may be considered a pop-upand be blocked if you are using Windows XP Service Pack 2, or using other security software.

If Service Pack 2 blocks the window the following message will appear:

"Pop-upblocked. To see thispop-upor additional options click here..."

Please select "Temporarily Allow Pop-ups"or "Always AllowPop-upsFrom This

Site..." to allow the window to open.

It is recommended that all web browser updates be installed. It is especially recommended that all users running Internet Explorer on a Microsoft Windows version prior to Windows XP Service Pack 2 install security update Q832894 (MS04-004)or the web browser interface may not be displayed correctly.

And when using an older version of Internet Explorer, during operations the browser will log out after 50 seconds.

Network Functions

Configuring and controlling the projector via a web browser (Continued)

When configuring or controlling the projector via a web browser, an ID and password are required. There are two types of IDs, Administrator IDs and User IDs. The following chart describes the differences between user and administrator IDs.

Item

Description

Administrator ID

User ID

 

 

 

 

Network Information

Displays the projector’s current

network configuration settings.

Network Settings

Displays and configures network

N/A

settings.

 

 

 

Port Settings

Displays and configures

N/A

communication port settings.

 

 

 

Mail Settings

Displays and configures e-mail

N/A

addressing settings.

 

 

 

Alert Settings

Displays and configures failure &

N/A

warning alerts.

 

 

 

Schedule Settings

Displays and configures schedule

N/A

 

settings.

 

 

Date/Time Settings

Displays and configures the date and

N/A

 

time settings.

 

 

Security Settings

Displays and configures passwords

N/A

and other security settings.

 

 

 

Projector Control

Controls the projector.

Projector Status

Displays and configures the current

projector status.

 

 

 

Network Restart

Restarts the projector’s network

N/A

connection.

 

 

 

Below are the factory default settings for administrator IDs, user IDs and passwords.

Item

ID

Password

 

 

 

Administrator ID

Administrator

<blank>

User ID

User

<blank>

Settings

Settings

Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter

Fig. 1

[https://192.168.1.10] into the

 

address bar of the web browser and

 

the screen in Fig. 1 will be displayed.

 

2)Enter your ID and password and click

[Logon].

If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.

Fig. 2 (Logon with administrator ID)

Fig. 3 (Logon with user ID)

3)Click the desired operation or configuration item on the main menu located on the left-handside of the screen (Fig. 2 or Fig. 3).

Settings

Network Information

All screen images displayed in this manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table.

Displays the projector’s current network configuration settings.

Item

Description

 

 

DHCP

Displays the DHCP configuration settings.

IP Address

Displays the current IP address.

Subnet Mask

Displays the Subnet Mask.

Default Gateway

Displays the Default Gateway.

MAC Address

Displays the MAC address.

Firmware Date

Displays the network firmware time stamp. This information is only

displayed when logged on using an administrator ID.

 

Firmware Version

Displays the network firmware version number. This information is

 

only displayed when logged on using an administrator ID.

7

Settings

Network Settings

Displays and configures network settings.

 

 

Item

Description

 

 

 

 

IP Configuration

Configures network settings.

 

DHCP ON

Enables DHCP.

 

DHCP OFF

Disables DHCP.

 

 

IP Address

Configures the IP address when DHCP is disabled.

 

 

Subnet Mask

Configures the Subnet Mask when DHCP is disabled.

 

 

Default Gateway

Configures the Default Gateway when DHCP is disabled.

Projector Name

Configures the Projector name.

SysLocation

Configures the location to be referred to when using SNMP.

SysContact

Configures the contact information to be referred to when

using SNMP.

 

 

 

Click the [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking[Network Restart] on the main menu.

• If you connect the projector to an existing network, consult a network administrator before setting server addresses.

8

Settings

Port Settings

Displays and configures communication port settings.

 

Item

Description

 

 

 

Network Control Port1

Configures command control port 1 (Port:23).

(Port:23)

 

 

Port open

Click the [Enable] check box to use port 23.

 

Authentication

Click the [Enable] check box when authentication is required

 

for this port.

 

 

Network Control Port2

Configures command control port 2 (Port:9715).

(Port:9715)

 

 

Port open

Click the [Enable] check box to use port 9715.

 

Authentication

Click the [Enable] check box when authentication is required

 

for this port.

 

 

Image Transfer Port

Configures the image transfer port (Port:9716).

(Port:9716)

 

 

Port open

Click the [Enable] check box to use port 9716.

 

Authentication

Click the [Enable] check box when authentication is required

 

for this port.

 

 

SNMP Port

Configures the SNMP port.

 

Port open

Click the [Enable] check box to use SNMP.

 

Trap address

Configures the destination of the SNMP Trap in IP format.

SMTP Port

Configures the SMTP port.

 

Port open

Click the [Enable] check box to use thee-mailfunction.

Click the [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed. The network connection can be restarted using[Network Restart] on the main menu.dresses.

Settings

Mail Settings

Displays and configures e-mailaddressing settings.

Item

Description

 

 

 

Click the [Enable] check box to use thee-mailfunction.

Send Mail

Configure the conditions for sending email under [Alert

 

Settings].

SMTP Server IP Address

Configures the address of the mail server in IP format.

Sender E-mailaddress

Configures the sender e-mailaddress.

The length of the sender e-mailaddress can be up to 255

 

alphanumeric characters.

 

Configures the e-mailaddress of up to five recipients. You

Recipient E-mailaddress

can also specify [TO] or[CC] for each address. The length of

 

the recipient e-mailaddress can be up to 255 alphanumeric

 

characters.

Click the [Apply] button to save the settings.

NOTE • You can confirm whether the mail settings work correctly using the

[Send Test Mail] button.

• If you connect the projector to an existing network, consult a network administrator before setting server addresses.

10

Settings

Alert Settings

Displays and configures failure & warning alerts.

 

Item

Description

 

 

 

Cover Error

Configures Cover Error alert settings.

 

SNMP Trap

Click the [Enable] check box to enable SNMP Trap alerts for

 

this item.

 

 

 

Send Mail

Click the [Enable] check box to enablee-mailalerts for this

 

item.

 

 

 

Mail Subject

Configures the subject line of the e-mailto be sent.

 

The length of the subject line can be up to 255 alphanumeric

 

 

characters.

 

Mail Text

Configures the text of the e-mailto be sent.

 

The length of the text can be up to 1024 alphanumeric

 

 

characters.

Fan Error

Configures Fan Error alert settings.

 

SNMP Trap

Click the [Enable] check box to enable SNMP Trap alerts for

 

this item.

 

 

 

Send Mail

Click the [Enable] check box to enablee-mailalerts for this

 

item.

 

 

 

Mail Subject

Configures the subject line of the e-mailto be sent.

 

The length of the subject line can be up to 255 alphanumeric

 

 

characters.

 

Mail Text

Configures the text of the e- mail to be sent.

 

The length of the text can be up to 1024 alphanumeric

 

 

characters.

11

Settings

Alert Settings (Continued)

 

Item

Description

 

 

 

Lamp Error

Configures Lamp Error alert settings.

 

SNMP Trap

Click the [Enable] check box to enable SNMP Trap alerts for

 

this item.

 

 

 

Send Mail

Click the [Enable] check box to enablee-mailalerts for this

 

item.

 

 

 

Mail Subject

Configures the subject line of the e-mailto be sent.

 

The length of the subject line can be up to 255 alphanumeric

 

 

characters.

 

Mail Text

Configures the text of the e-mailto be sent.

 

The length of the text can be up to 1024 alphanumeric

 

 

characters.

Temp Error

Configures Temp Error alert settings.

 

SNMP Trap

Click the [Enable] check box to enable SNMP Trap alerts for

 

this item.

 

 

 

Send Mail

Click the [Enable] check box to enablee-mailalerts for this

 

item.

 

 

 

Mail Subject

Configures the subject line of the e-mailto be sent.

 

The length of the subject line can be up to 255 alphanumeric

 

 

characters.

 

Mail Text

Configures the text of the