Dukane 220E User Manual

Size:
2.18 Mb
Download

Camera 220E

Document Camera

User’s Guide

#401-220E-01

Table of Contents

TABLE OF CONTENTS .........................................................................................

1

COPYRIGHT INFORMATION ................................................................................

2

CHAPTER 1 PRECAUTIONS ................................................................................

3

CHAPTER 2 PACKAGE CONTENT ......................................................................

4

CHAPTER 3 PRODUCT OVERVIEW ....................................................................

5

3.1

PRODUCT INTRODUCTION.......................................................................

5

3.2

I/O CONNECTION .......................................................................................

6

3.3

DIP SWITCH ................................................................................................

6

3.4 & 3.5 INFRARED REMOTE CONTROL ......................................................

7

CHAPTER 4 HOW TO USE IT ...............................................................................

9

4.1

GETTING STARTED ...................................................................................

9

4.1.1 TURN ON THE DIGITAL PRESENTER...................................................

9

4.1.2

LENS FOCUS ..........................................................................................

9

4.1.3 ZOOM IN / OUT........................................................................................

9

4.1.4

SWITCH SOURCE...................................................................................

9

4.1.5

PHOTO/TEXT:........................................................................................

10

4.1.6

ENTER AWB ..........................................................................................

10

4.1.7 CAPTURE IMAGE & REVIEW CAPTURE IMAGE ...............................

10

4.2

SHOWING THE OSD MENU.....................................................................

12

4.3

SELECT FUNCTION: ................................................................................

12

4.4

OSD MENU INTRODUCTION ...................................................................

13

CHAPTER 5 USB SOFTWARE INSTRUCTIONS...............................................

16

CHAPTER 6 TROUBLESHOOTING......................................

Inside Back Cover

 

 

 

1

 

 

 

 

 

 

Chapter 1 Precautions

Always follow these safety instructions when setting up and using the Digital Presenter:

1.Do not place the Digital Presenter on an unstable trolley, stand or table.

2.Do not use the Digital Presenter near water or source of heat.

3.Use attachments only as recommended.

4.Use the type of power source indicated on the Digital Presenter. If you are not sure of the type of power available, consult your dealer or local electricity company for advice.

5.Place the Digital Presenter where it can be easily unplugged.

6.Always take the following precautions when handling the plug. Failure to do so may result in sparks or fire.

Ensure the plug is free of dust before inserting it into a socket.

Ensure that the plug is inserted into the socket securely.

7.Do not overload wall sockets, extensions leads or multi-wayplug boards as this may cause fire or electric shock.

8.Do not place the Digital Presenter where the cord can be stepped on as this may result in fraying or damage to the lead or the plug.

9.Unplug the projector form the wall socket before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

10.Do not block the slots and openings in the case. They provide ventilation and prevent the Digital Presenter from overheating. Do not place the Digital

Presenter on a sofa, rug or other soft surface or in a built-ininstallation unless proper ventilation is provided.

11.Never push objects of any kind through slots. Never allow liquid of any kind to spill into the Digital Presenter.

12.Except as specifically instructed in this User’s Manual, do not attempt to operate this product by yourself. Opening or removing covers may expose you to dangerous voltages and other hazards. Refer all servicing to licensed service personnel.

13.Unplug the Digital Presenter during thunderstorms or if it is not going to be used for an extended period, do not place the Digital Presenter or remote control on top of heat-emittingequipment or heated objects such as a car and etc.

14.In the following situations, unplug the Digital Presenter from the wall outlet and refer servicing to licensed service personnel:

If the power cable or plug becomes damaged or frayed.

If liquid is spilled into it or the Digital Presenter has been exposed to rain or water.

2

Safety Precautions

Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

This Digital Presenter has a 2 wires AC line Plug. This is a safety feature to ensure that the plug will fit into the power outlet. Do not try to defeat this safety feature.

If the Digital Presenter will not be used for an extended time, unplug it from the power outlet.

CAUTION

RISK OF ELECTRIC SHOCK

Caution: To reduce the risk of electric shock. Do not remove cover (or back). No user-serviceableparts inside. Refer servicing to licensed service Personnel.

 

This symbol indicates that

 

This symbol indicates that

 

dangerous voltage

 

there are important operating

 

constituting a risk of electric

 

and maintenance instructions

 

shock is present within this

 

in this User’s Manual with this

 

unit.

 

unit.

FCC Warning

This Digital Presenter has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. These limits are designed to provide reasonable protection against a harmful interference when the equipment is operated in a commercial environment.

EN55022 (CE Radiation) Warning

This product is intended for use in a commercial, industrial, or educational environment. It is not intended for residential use.

This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.

3

Chapter 2 Package Content

Please make sure the package comes with the following items when you unpack:

Camera 220C

 

User’s Manual

 

CD

Power Cable

 

USB Cable

 

C-VideoCable

VGA Cable

 

DVI Adapter

 

Remote Controller

4

Chapter 3 Product Overview

3.1Product Introduction

Lens

Power / Control Button

I/O Port

Lamp

DIP Switch

5

3.4 Infrared Remote Control

3 2 1

12

4

5

 

11

 

6

10

7 8 9

1.Power:

Turn on/ off.

2.Capture:

Capture the image.

3.Freeze:

Freeze the image.

4.Arrows:

You may press the 4 hot keys of Up/Down/Right/Left to go to the desired function item then press the Enter key to take effect.

5.Flip:

Rotate the image by 180 degrees.

6.Source:

Switch between different signal sources.

7.Gamma:

Different color contrast modes.

8.Lamp:

Turn on/ off Lamp.

9.Play & Del:

Play press, you can recall the saved images in the flash memory of your Digital Presenter. Press Del if you would like to discard the saved image.

10.Zoom +/-:

Make the image larger & smaller.

11.BRT+/-:

Press the keys to make the image brighter or darker.

12.Menu:

Click on Menu, you may adjust all the functions on the screen.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCRDING TO THE INSTRUCTIONS.

7

3.5 IR Remote Control via 3.5 mm Mini Connector

The IR commands from a protocol converter can be sent directly to an IR emitter located behind the dark window on the front of the camera. This permits the camera to be controlled as part of a system without the necessity of attaching external IR emitters. The 3.5 mm mini connector on the body, “IR Control Input,” is connected internally to an IR emitter located near the detector. This detector can receive the IR signals from the emitter. A visible red LED is also located behind the camera window and blinks when the IR emitter is operating

8

Chapter 4 How to use it

This chapter describes the basic and advanced functions of the Digital Presenter, how to use the OSD (On Screen Display) menu.

4.1Getting Started

4.1.1Turn on the Digital Presenter.

¾Option 1: Press button.

¾Option 2: Press button of remote controller.

4.1.2Lens focus

¾Turn the lens to optimize the focus

4.1.3Zoom in / Out

¾ Press the control button

4.1.4Switch source

¾Press to Choose signal source between Camera 220E or PC. That signal is sent to the projector.

9

4.1.5 Photo/Text:

¾ Press to Select the text or photo mode.

4.1.6Enter AWB (Auto White Balance)

¾press to set the auto white balance.

4.1.7Capture Image & Review of captured images

¾How to capture an image

Method 1 Press on the remote to capture image that you would like to save.

Method 2 Follow the steps using the pad buttons on the Camera.

2.1First, press to go to the OSD (On Screen Display).

2.2Second, press^ v select the "Storage" icon, and

press "Enter AWB" button

Then select “Capture”, and pressto capture image that you would like to save.

¾Review of capture images:

Method 1 Operation fromCamerapadbuttons. .

10

1.1

First, press

button to go to OSD interface.

1.2

Second, press ^ v to select the "storage"

 

icon, and press

 

 

Then select “Playback”, and press, so you can see all captured thumbnail images on the screen.

1.3You can pressbutton to select the image which you want to magnify. (Enlarge to full screen)

Then press , the image will appear full screen.

Method 2: Using the Remote Control:

Method 2: Using the Remote Control:

2.1 First please press the button to

see all thumbnail images that you had captured.

Then, press button to select image

which you want to enlarge and press

, the image will now be showen

become full screen.

 

ModelMethod33UseUsethetheremoteremoteto operateto operatethe OSDthe OSDinterfaceinterfaceoperationoperation..

3.1 Press the button to go into the OSD interface.

11

3.2 Press ^ v to select the "Storage"

 

icon and

 

 

 

press .

Then select “Playback”, and press, so you can see all captured thumbnail images on the screen.

3.3 Then, press button to select the thumbnail image

which you want to magnify and press , the image will show full screen.

4.2Showing the OSD (On Screen Display) Menu

¾Option 1: Pressbutton to show the OSD Menu

¾Option 2: Press button of remote control.

4.3Select function:

¾Option 1: Press the ^ v< > to search functions then press the Enter key to enable your selection.

¾Option 2(On remote control): Press ^ v< > to navigate functions then press the Enter key to invoke your selection.

12

4.4OSD Menu Introduction

TheTheMainMeMenucontainingcontains fivefiveicons, Theand functionsdetail functionsare shownwill be explained in nextin thepagefollowing. table.

Setting

Display

Source

Storage

Exit

¾ VGA Mode (Computer Image)

Layer 1

Layer 2

Layer 3

 

Function

 

 

 

Lamp

On / Off / Exit

Select Lamp On or Off.

 

 

 

 

 

 

Night view

On/Off

 

Select Night view function On or Off.

Setting

Language

English, Deutsch,

Select a preferred language on the

 

 

 

 

Francais, Italiano,

menu.

 

 

 

 

Espanol, Русский,

 

 

 

 

 

 

 

 

 

 

 

,

 

, Exit

 

 

 

 

 

 

 

 

 

 

 

Output

XGA 75Hz, XGA

Select a suitable output format.

 

 

 

Format

60Hx, SVGA 75Hz,

 

 

 

 

SVGA60 Hz

 

 

 

 

 

 

 

 

 

Factory

Enter/Exit

 

Reset all the values to the factory

 

 

 

Reset

 

 

 

 

 

default.

 

 

 

Exit

 

 

 

 

 

Exit this menu.

13

 

 

 

Brightness

0-46(for PAL)

Brightness adjustment

 

 

 

 

 

 

 

0-40( for NTSC)

 

Display

Zoom

Digital Zoom

Adjust Zoom 100% ~ 1600%.

 

 

 

 

(100% to 1600%)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gamma

Photo / Text

Select Photo/Text Mode.

 

 

 

Image

Normal / Gray / Film

Select Normal/Gray/Film Mode.

 

 

 

Flip

On/Off

Adjust the image up and down by

 

 

 

 

 

 

 

180°.

 

 

 

Freeze

On/Off

Use Freeze to retain the image on

 

 

 

 

 

 

 

the screen.

 

 

 

Exit

 

 

 

Exit this menu.

 

 

 

Presenter

 

 

 

Select images of Presenter or VGA

 

 

 

 

 

 

 

 

 

 

 

 

 

Input.

 

 

 

VGA In

 

 

 

Source

 

 

 

 

 

 

 

 

 

 

 

 

Capture

 

 

 

Capture the image of Presenter.

 

 

 

 

 

 

 

 

 

Playback

 

 

 

Present the captured image.

Storage

Delete

 

 

 

Delete the captured image.

 

 

 

Delete All

Delete All

Delete all images.

 

 

 

 

Enter/ Exit

 

 

 

 

Format

Memory Format

Memory Format

 

 

 

 

Enter/ Exit

 

 

 

 

Exit

 

 

 

Exit this menu.

 

 

 

 

 

 

 

Exit menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

VIDEO Mode (For NTSC, lower resolution)

Layer 1

Layer 2

Layer 3

Function

 

Brightness

0-46(for PAL)

Brightness adjustment

 

 

0-40( for NTSC)

 

Display

Gamma

Photo/Text

Select Photo/Text Mode.

 

Image

Normal/Gray

Select Normal/Gray Mode.

 

Freeze

On/Off

Use Freeze to retain the image on

 

the screen.

 

 

 

 

Exit

 

Exit this menu.

 

Lamp

On/Off

Turn On/Off lamp

 

 

Full Range On/off

Switch Full range on/off and night

 

Advance

Night view On /off

 

view on/off

 

 

Exit

 

 

 

 

Language

English / / /Exit

Select a preferred language on the

Setting

menu.

 

 

 

Factory

Enter / Exit

Reset all the values to the factory

 

Reset

default.

 

 

 

Exit

 

Exit this menu.

 

 

 

Exit menu.

 

 

 

 

Camera as Switch

The DVI Adapter connects the DVI output to an input for a computer (VGA). When this input is used, the “SOURCE” button or menu command will switch the output between the “CAMERA IMAGE” and the “COMPUTER” image (VGA) on the DVI adapter.

When camera is “OFF” the computer VGA signal from the “DVI Port” adapter will pass through the camera to the “VGA Out” port. Thus the camera can be in a path to a projector and will let the signal pass through. If the camera is turned on the VGA pass through remains until the “Source” button is pressed. The camera image then becomes the output.

Note: The camera must be plugged in to have this pass through feature.

15

Chapter 5

Using the Camera USB with a Computer

Installation

1. Insert the software CD in your computer’s CD-ROM.

2.Connect the Camera and PC with USB Cable . Follow instructions for driver download.

3.Before you install MR2004, please be sure your system meets these requirements.

Operation System • Windows XP • Windows 2000 • ME • 98 • 98SE

CPU • Intel Pentium II 350MHz over and above

CD ROM or DVD ROM

64MB RAM

Minimum 40MB HD space

4. The “Auto run” program will be shown automatically, if you would like to install

MR2004, please press Install MR2004

16

16

35.. The installation wizard is shown, please press Next to go next.

46.. While the License Agreement picture is shown, selectI accept the terms in the license agreement and press Next to go next.

17 5

57.. Click Next to install from the default folder or click Change to specify a difference.

68.. Please press Install to begin installation.

79.. The installation is processing, if you would like to cancel, please press Cancel to stop installation.

18 6

108. Please press Finish to complete the installation.

19 7

119.. After installation, the MR2004 is launched automatically or you may go to the PC “Start”,

and look at “All Programs” to find MR2004.

Functions

This chapter will introduce all functions of MR2004, the user interface of MR2004 as below.

The basic window with the functional areas indicated follows:

Tool bar

Work and display area

Tool bar of

Preview window

Preview area

20 8

The Tool Bar Functions are described.

1. File

zNew Open new project(fileformat--*.mr2)

zOpen Open old project in stored file

zSave Save present edited project

zSave As Save to be a new project or given file

zSave Image Save reedited JPG image

zImport From Device Import an image from memory device

(Only for certin devices.)

zExport to PPT Export the image to be Power Point file format

zLanguage Select English, Traditional Chinese, Simplify Chinese user interface.

2.Real Time

One image can be imported from input device such as Document Camera. Available functions are Freeze, Capture, Paint tool and Full screen.

Notice If the image canÕt be displayed normally in real time mode, please double check the connection between computer with camera.

219

3. Edit mode

Functions in this mode are File, Paint tool and Full screen.

The Freeze and capture are not available in edit mode.

The lower Preview window tool bar appears for the Edit mode.

4. Freeze

The image can be frozen in real time mode.

(*This function is only available in real time mode)

5. Capture

You can capture images which are saved as JPG files in the default folder is C:\Program File\MR2004\,

(* This function is only available in real time mode.)

6. Paint and Annotation tool

This is a basic annotation or drawing tool, it can be used in real time and the edit mode, right click for tool, left click to mark any region in the image.

1.Pointer Mouse pointer

2.Laser Click "Laser" to show a spot on the screen

3.Handwrite Click and drag to draw a line or annotate

4.Line Click and drag to draw a line

5.Ellipse Click and drag to draw a circle

6.Rectangle Click and drag to draw a rectangle

7.Eraser Click and drag to clear lines

8.Clear all Clear all lines on the picture

9.Color Choose the line color

10.Thickness Choose thickness of lines. (1 to 99)

7. Full Screen

The image can be increased to full screen with the "full screen" function. It is available in

 

Real time mode, and Edit mode.

 

 

Right -clickon the picture and then the paint tool will appear.

 

 

Use "ESC" to return to normal size window.

22

10

 

In the "Edit Mode" the lower Preview Area images can be selected using the "Page Up" or "PageThe pictureDown"canbuttonbe change. on the screen with ÒPage upÒorÓPage DownÓ button.

8.Import from device

This function does not operate with the Camera. Please ignor.

One image can be captured in the MR2004 via CPT-Iconnection device of MH400 that is more efficiency then ÒcaptureÓ function in real time mode.

9. Image beforehand view tool

Insert a picture from image file. Bring in picture from file.

Change picture order in the sequence.

Copy picture and save in a JPEG file.

Delete picture

Notice The source image canÕt be disconnected with ÒDelete PictureÓ function.

23 11

OCperation

1Choose Language

FILE Æ Language , there are 3 language for selection English &Traditional-ChineseandSimplify-Chinese,please choose English .

2 Display image

2.1 Real Time Operation Import a line image from Camera. Document Camera)

2.2 Import From Device, Import images from Camera. May not always be operative. device.

2.3 Edit model open old file, Use preview toolto open an old file in edit mode..

24 12

3Edit image

3.1 Marking Click any tool in the paint tool menu to modiy the image.

<Please refer to Chapter 3>

25 13

3.2 Edited and save After editing pictures, click the small picture icon in the preview area, and then save the picture.

Click the small picture

4 Save

After

4.1 Save MR2004 file Save as Ò*.m2Ó file format toC:\Program Files\MR2004

4.2Export to PPT format After editing and arranging images, the function can export to power point file.

26 14

Chapter 5 Troubleshooting

If none of the suggested solutions solves the problem, call your dealer or your service center.

Problem 1: No picture from the Camera.

Solution -

1:Wait a few seconds, press desired source selector again.

2:Press a different source, then press-desiredsource again.

3:Check if the power is turned on. (Pilot Light On?)

4:Make sure the document or object is positioned under the camera.

5. If in USB operation disconnect and then reconnect the USB Cable

Problem 2: Cannot Focus, camera will not focus properly.

Solution - To properly focus: Move Camera head further away from object. focus and then zoom out to desired distance.

Problem 3: Image is too bright or dark. Can not see desired part of the image because it is too bright or dark.

Solution Ð Adjust the BRT+/- Control Button on the remote control.

* The updated information will be regularly released on the Dukane web site, please visit our web site http://www.dukcorp.com/av.

27

2 1

Audio Visual Products

2900 Dukane Drive

Toll-free:800-676-2487

St. Charles, Illinois 60174

Fax: 630-584-5156

www.dukcorp.com/av

e-mail:avsales@dukcorp.com

#401-220E-01