Delta D28609 User Manual

Size:
805.42 Kb
Download

5 Horsepower Pressure Washer with 6000 Cleaning Units

(Model D2400H)

PART NO. D28609 Rev. 0

Copyright © 2003 Delta Machinery

To learn more about DELTA MACHINERY

ESPAÑOL: PÁGINA 23

visit our website at: www.deltamachinery.com.

FRANÇAIS: PAGE 45

 

 

For Parts, Service, Warranty or other Assistance,

please call 1-866-422-4286

CTIOINSTRU M N ALANU

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY andPREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indicates an imminently

 

 

 

 

 

 

 

Indicates a potentially

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

hazardous situation

 

 

 

 

 

 

 

hazardous situation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

which, if not avoided, will result indeath

 

 

which, if not avoided, may result inminor

 

 

or serious injury.

 

 

or moderate injury.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Used without the safety

 

 

 

 

 

Indicates a potentially

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

hazardous situation

 

 

 

 

 

 

 

alert symbol indicates a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

which, if not avoided, could result in

 

 

potentially hazardous situation which, if

 

death or serious injury.

 

 

not avoided, may result inproperty

 

 

 

 

 

 

 

 

 

damage.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONSUMER SAFETY INFORMATION

This product may not be equipped with a spark arresting muffler. If the product is not equipped and will be used

around flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar items, then an approved spark arrester must be installed and is legally required in the state of California. It is a violation of California statutes section 130050 and/or sections 4442 and 4443 of the California Public Resources Code, unless the engine is equipped with a spark arrester, as defined in section 4442, and maintained in effective working order. Spark arresters are also required on some U.S. Forest Service land and may also be legally required under other statutes and ordinances.

Engine exhaust contains chemicals known, in certain quantities, to cause cancer, birth defects or other

reproductive harm.

D28609

2- ENG

IMPORTANT SAFETY INSTRUCTIONS

Read Operation Manual. Do not operate equipment until you have read Operation Manual for Safety, Assembly, Operation,

and Maintenance Instructions.

READ AND SAVE THESE INSTRUCTIONS

HAZARD

RISK OF EXPLOSION OR FIRE

WHAT CAN HAPPEN

Spilled gasoline and it’s vapors can become ignited from cigarette sparks, electrical arcing, exhaust gases, and hot engine components such as the muffler.

Heat will expand fuel in the tank which could result in spillage and possible fire explosion.

Operating the pressure washer in an explosive environment could result in a fire.

Materials placed against or near the pressure washer can interfere with its proper ventilation features causing overheating and possible ignition of the materials .

Muffler exhaust heat can damage painted surfaces, melt any material sensitive to heat (such as siding, plastic, rubber, or vinyl), and damage live plants.

Improperly stored fuel could lead to accidental ignition. Fuel improperly secured could get into the hands of children or other unqualified persons.

Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.

HOW TO PREVENT IT

Shut off engine and allow it to cool before adding fuel to the tank.

Use care in filling tank to avoid spilling fuel. Move pressure washer away from fueling area before starting engine.

Keep maximum fuel level ½” below top of tank to allow for expansion.

Operate and fuel equipment in well ventilated areas free from obstructions. Equip areas with fire extinguisher suitable for gasoline fires.

Never operate pressure washer in an area containing dry brush or weeds.

Always keep pressure washer a minimum of four feet away from surfaces (such as houses, automobiles, or live plants) that could be damaged from muffler exhaust heat

Store fuel in an OSHA approved container, in a secure location away from work area.

Do not spray flammable liquids.

HAZARD

RISK TO BREATHING

WHAT CAN HAPPEN

Breathing exhaust fumes will cause serious injury or death!

Some cleaning fluids contain substances which could cause injury to skin, eyes, or lungs.

HOW TO PREVENT IT

Operate pressure washer in a well ventilated area. Avoid enclosed areas such as garages, basements, etc.

Never operate unit in a location occupied by humans or animals.

Use only cleaning fluids specifically recommended for high pressure washers. Follow manufacturers recommendations. Do not use chlorine bleach or any other corrosive compound.

3- ENG

D28609

HAZARD

RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING

WHAT CAN HAPPEN

Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will damage carpet, paint or other surfaces in vehicles or trailers.

HOW TO PREVENT IT

If pressure washer is equipped with a fuel shut-offvalve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuelshut-offvalve, drain the fuel from tank before transporting. Only transport fuel in an OSHA approved container. Always place pressure washer on a protective mat when transporting to protect against damage to vehicle from leaks. Remove pressure washer from vehicle immediately upon arrival at your destination.

HAZARD

RISK OF FLUID INJECTION

WHAT CAN HAPPEN

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.

HOW TO PREVENT IT

Never place hands in front of nozzle.

Direct spray away from self and others.

Make sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.

Do not allow hose to contact muffler.

Never attach or remove spray wand or hose fittings while system is pressurized.

To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.

Use only hoses and accessories rated for pressure higher than your pressure washer's p.s.i.

HAZARD

RISK OF CHEMICAL BURN

WHAT CAN HAPPEN

HOW TO PREVENT IT

Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.

Do not use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners and degreasers recommended for use in pressure washers.

Wear protective clothing to protect eyes and skin from contact with sprayed materials.

D28609

4- ENG

HAZARD

RISK OF UNSAFE OPERATION

WHAT CAN HAPPEN

Unsafe operation of your pressure washer could lead to serious injury or death to you or others.

If proper starting procedure is not followed, engine can kickback causing serious hand and arm injury.

The spray gun/spray wand is a powerful cleaning tool that could look like a toy to a child.

Reactive force of spray will cause gun/wand to move, and could cause the operator to slip or fall, or misdirect the spray. Improper control of gun/spray wand can result in injuries to self and others.

HOW TO PREVENT IT

Do not use chlorine bleach or any other corrosive compound.

Become familiar with the operation and controls of the pressure washer.

Keep operating area clear of all persons, pets, and obstacles.

Do not operate the product when fatigued or under the influence of alcohol or drugs. Stay alert at all times.

Never defeat the safety features of this product.

Do not operate machine with missing, broken, or unauthorized parts.

Never leave spray wand unattended while unit is running.

If engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure. Pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury.

Keep children away from the pressure washer at all times.

Do not overreach or stand on an unstable support. Grip gun/spray wand firmly with both hands. Expect the gun to kick when triggered.

HAZARD

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN

Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.

HOW TO PREVENT IT

Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.

HAZARD

RISK OF HOT SURFACES

WHAT CAN HAPPEN

Contact with hot surfaces, such as engines exhaust components, could result in serious burn.

HOW TO PREVENT IT

During operation, touch only the control surfaces of the pressure washer. Keep children away from the pressure washer at all times. They may not be able to recognize the hazards of this product.

5- ENG

D28609

HAZARD

RISK OF INJURY FROM SPRAY

WHAT CAN HAPPEN

HOW TO PREVENT IT

High velocity fluid spray can cause objects to break, propelling particles at high speed.

Light or unsecured objects can become hazardous projectiles.

Always wear ANSI approved Z87 safety glasses.Wear protective clothing to protect against accidental spraying.

Never point spray wand at, or spray people or animals.

Always secure trigger lock when spray wand is not in service to prevent accidental operation.

Never permanently secure trigger in pull back (open) position.

The powerful spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto

stripping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel.

Operating without flow of water will result in equipment damage. Operating the pressure washer with water supply shutoff will void your warranty. You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.

CONSUMER GENERAL AND SERVICE INFORMATION

DO NOT RETURN THIS PRODUCT TO THE RETAILER! FOR SERVICE OPTIONS CALL: 1-866-422-4286

Congratulations! You have purchased a high quality product from America’s leading manufacturer of pressure washers. This pressure washer, when properly used and maintained, will provide trouble-freeservice. Please read and follow these instructions for proper use and maintenance.

Please take the time now to register your pressure washer online at www.devap.com.

All sales of pressure washers are final. Do not return this product to the retailer.

If you experience any problems and need assistance, please call us at our toll-freenumber1-866-422-4286, Monday through Saturday.

If repair or service part purchase is required, our many Authorized Warranty Service Centers are conveniently located and equipped to handle all in-warrantyandout-of-warranty service.

For the location of the nearest Authorized Warranty Service Center call 1-866-422-4286,24 hours a day, 7 days a week or visit our web site at www.devap.com.

All pressure washers carry a manufacturer's one year warranty from date of purchase for consumer use and a 90 day warranty for commercial use.

Retain sales receipt as proof of purchase for warranty service.

Read and understand all safety warnings.

Do not operate this unit until you have read and understand this Operation Manual for Safety, Operation, and Maintenance Instructions.

Do not operate this unit until you have read and understand the Engine Owners Manual for Safety, Operation, and Maintenance Instructions.

D28609

6- ENG

CARTON CONTENTS

Note: Photographs and line drawings used in this manual are for reference only and do not represent a specific model.

Engine Frame and

Wheel Assembly

Engine Oil

 

English/

 

Spanish/

Handle

French

Operator’s

 

Manual

Engine

 

Manual

 

Bagged Handle

High Pressure Hose

Knobs

 

Saddle

 

Bolts

 

Chemical

Grommet Kit

Hose

with Quick

 

Connect Nozzles

Nozzle Cleaning

 

Kit

 

Bagged Parts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Spray Gun

 

 

Quick Connect Spray Wand

Surface Cleaning Guide

7- ENG

D28609

ASSEMBLY INSTRUCTIONS

1.Place handle assembly onto frame and connect handle to frame.

2.Attach high pressure hose to gun. Tighten

3.To Assemble "Water Vroom" surface cleaning guide. NOTE: If not using the "Water Vroom" surface cleaning guide proceed to step 4.

a. Loosen knob (a) and rotate "J" hook (b) down and out of the way.

a

b

b.Slide spray wand (c) through opening in surface cleaning guide. IMPORTANT: Make sure nozzle is removed before assembling surface cleaning guide.

c

D28609

8- ENG

c.Adjust spray wand to desired height needed for job to be performed.

d.Snap spray wand (c) into place on surface cleaning guide.

c

e.Rotate "J" hook over spray wand and tighten knob securely.

b

a

f.See To Use Spray Wand paragraph in the Operation section of this manual to choose and assemble the correct nozzle for the job to be performed.

4.Connect spray wand to gun. Tighten securely.

9- ENG

D28609

5.To Assemble Quick Connect Grommets:

a. Squeeze grommet and place into hole, fitting groove to rim.

b.Push grommet into place.

c.Repeat steps until all grommets are assembled.

6.To Assemble Quick Connect Nozzles:

a.Remove five colored quick connect nozzles from plastic bag and insert them into correct grommet. NOTE: Nozzles are color coded to match colored nozzles on panel.

7.Add engine oil (supplied) to engine. Refer to Engine Owners Manual supplied by engine manufacturer for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual for maintenance information.

D28609

10ENG