Delta 2583-LHP User Manual

Size:
108.58 Kb
Download

2583-LHP

Submitted M odel No. : _______________________________________________

Specific Feat ures: _________________________________________________

_

 

5"

 

 

 

(127 mm)

 

 

 

 

 

 

4 7/8"

 

 

 

 

(124 mm)

 

 

 

 

2 3/8"

 

 

 

 

(60 mm)

 

 

1 3/8" (35 mm)

 

 

Max. Deck

1 15/16"

 

 

Thickness

(49 mm)

 

 

 

 

4" Centers

 

 

 

 

(102 mm)

 

2 1/4"

 

 

6 1/4"

 

(57 mm)

 

 

(159 mm)

 

1/2"-14NPSM

2 1/8"

 

1 5/8"

 

 

(54 mm)

(42 mm)

 

 

Dia.

 

to

 

 

 

 

2 3/8"

 

 

 

(61 mm)

 

3 3/8"

 

 

 

 

(86 mm)

 

 

 

 

 

 

 

1 3/8"

 

 

 

 

(35 mm)

 

 

 

 

Dia.

 

4 5/8"

 

 

 

 

(118 mm)

 

 

 

 

1 1/4" (32 mm) Dia.

 

 

 

 

Available LHP Handle Options

Designate proper finish suffix

H24

A24 H25

H26

3 1/4"

2 1/2"

1 1/4"

(83 mm)

(64 mm)

(32 mm)

H27

H212

H215

Available LHP Handle Accent Options with Matching Lift Rod Knobs

A24, A24PB,

A24WH

1 1/4"

3"

2 5/16"

(59 mm)

(32 mm)

(76 mm)

 

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-lineprice book or www.specselect.com for finish options and product availability.

DSP-L-2583-LHPRev. B

LAVATORY

FAUCETS

C-SpoutSe ries

Two Handle Deck Mount

3 Hole Sink Applications

4" Cent erset

STANDARD SPECIFICATIONS:

Solid brass fabricated body.

4" (102 mm) cen terset.

5" (127 mm) long, 4 7/8" (124 mm) high rigid spout.

LHP - Less Handle Program. See handle options below.

1/4 turn handle stops.

Hot and cold stems are interchangeable.

Brass stems with 1/4 turn handle stops.

Control mechanism is t he rotating cylinder type with stainless steel plate and 180° rotation, with replaceable non-metallicseats operating in stainless steel lined sockets.

1/2"-14NPSM threaded male inlet shanks.

Models have metal drain with pop-uptype fitting with plated flange and stopper.

Maximum flow rate 1.5 gpm @ 6 0 PSI.

WARRANTY

Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free from defects in material and workmanship.

5 Year Limited Warranty for usage in all industrial, commercial and business applications.

®

U P

C

 

®

COMPLIES WITH:

ASME A 112.18.1/ CSA B125.1

ASME A 112.18.2 / CSA B125.2

Indicates compliance to ICC/ANSI A117.1

EPA Water Sense

 

 

 

 

 

 

 

Pressure (kPa)

 

 

 

 

 

 

 

 

 

 

 

0

69

138

207

276

345

414

483

552

621

 

Minute)

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

22.7

Flow

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18.9

Gallons(U.S.Flow Per

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Minute)Per (Liters

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15.1

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11.4

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

10

20

30

40

50

60

70

80

90

 

 

 

 

 

 

 

 

 

Pressure (PSI)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

55 E. 111th Street, Indianapolis, Indiana 46280

395 Matheson Blvd. E., Mississauga, ON L4Z 2H2 © 2008 Masco Corporation of Indiana

1.D.20