DeLonghi KBX3016, KBX3016.C, KBA3014-2, KBE3014-2 User Manual 2

0 (0)

i n s t r u c t i o n s

CORDLESS KETTLE

KBX3016/KBX3016.C/KBA3014-2/KBE3014-2

Please retain these instructions for future reference

De’ Longhi S.p.A via Seitz, 47 - 31100 - Treviso - Italia

DeLonghi KBX3016, KBX3016.C, KBA3014-2, KBE3014-2 User Manual 2

Description of Appliance

The following terms are used throughout the instruction manual

Lid

Filter

Water level indicator

Steam tube

Maximum water level indicator

On/Off switch

Pilot light

360° base with cord storage

Plug

2

Kettle

Thank you for choosing this De’Longhi kettle.To get the best results from your new kettle it is advisable to read these instructions carefully before using the appliance.

This is the only way to ensure optimum results and maximum safety.

Before use

Check that the appliance has not been damaged during transport.

Remove all packaging from the kettle and power base.

Remove any labels from the outer surfaces.

Remove the filter (fig. 1) and wash with water (fig. 2). Refer to

page 5. “Removing the scale filter”

Fill the kettle and boil.

The boiled water should be discarded and the kettle rinsed out with cold water.This procedure should be carried out three times, to remove any manufacturing dust, etc.

After the kettle has been rinsed out, re-fit the filter (fig. 3).

Using the kettle

Power base with 360° access

With the specially designed power base and central connector, you can now set the kettle on the base at any angle, from any position.

Release cord from storage base and adjust length by winding around the base to give the correct cord length to reach the plug socket to be used (fig. 4).

Do not leave loose cord hanging over the edge of work surfaces.

Filling

Remove the kettle from the base unit before filling.

Open lid and fill kettle to desired level.

Do not fill with less than 0,5 litre of water to prevent the kettle running dry while operating; misuse of this kind will shorten the life of the element.

Do not fill with more than 1,7 litres of water (up to the MAX indication located inside the kettle) (fig. 5). If the kettle is overfilled, there is a risk that boiling water may overflow and cause burns.

A handy external water level indicator enables you to see the quantity of water in the kettle.

3

c

a

b

Fig.1

Fig.2

1

2

Fig.3

CORD EXIT

Fig.4

MAX 1.7 litres

MIN 0.5 litres

Fig.5

Kettle

Loading...
+ 5 hidden pages