Dell™ E170S/E190S Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Solving Problems
Appendix
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries; ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Model E170Sb/E170Sc/E190Sb/E190Sf
March 2009 Rev. A01
Back to Contents Page
About Your Monitor
Dell™ E170S/E190S Flat Panel Monitor User's Guide
Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability
LCD Monitor Quality & Pixel Policy
Maintenance Guidelines
Package Contents
Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
NOTE: Some items may be optional and may not ship with your Monitor. Some features or media may not be available in certain countries.
• Monitor with stand
• Power Cable
• VGA Cable
•Drivers and Documentation media
•Quick Setup Guide
•Safety Information
Product Features
The E170S/E190S flat panel display has an active matrix, thin-film transistor (TFT), and liquid crystal display (LCD). The monitor features include:
■E170S: 17-inch (432.7 mm) viewable area display. 1280 x 1024 resolution, plus full-screen support for lower resolutions.
■E190S: 19-inch (482.2 mm) viewable area display. 1280 x 1024 resolution, plus full-screen support for lower resolutions.
■Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side to side.
■Tilt adjustment capability.
■Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.
■Plug and play capability if supported by your system.
■On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
■Software and documentation CD which includes an information file (INF), Image Color Matching File (ICM), and product documentation.
■Energy Saver feature for Energy Star compliance.
■Security lock slot.
■EPEAT Gold Rating.
■Halogen Reduced.
■Asset Management.
Identifying Parts and Features
Front View
Front View |
Front panel controls |
Label Description
1OSD menu button
2Down (-) button/Brightness & Contrast
3Up (+) button/Auto-Adjust
4Power On/Off button with LED indicator
Back View
Back view
Label
1Dell Soundbar mounting brackets
2Security lock slot
3Stand removal button
4
VESA mounting holes (100 mm - behind attached stand)
5Barcode serial number label
6Regulatory rating label
7Cable management slot
Description/Use
Attach the optional Dell Soundbar.
Attach a lock to secure your monitor.
Press to release the stand.
Use to mount monitor.
Refer to this label if you need to contact Dell for technical support.
List the regulatory approvals.
Help organize cables by passing them through the holder.
Side View
Right side |
Left side |
|
|
Bottom View
Bottom view
Label Description
1AC power cord connector
2VGA connector
Monitor Specifications
Power Management Modes
If you have VESA's DPMS™ compliance display card or software installed in your computer, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode. If input from a keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:
E170S
VESA Modes |
Horizontal |
Vertical Sync |
Video |
Power |
Power Consumption |
|
Sync |
|
|
Indicator |
|
|
|
|
|
|
|
|
|
|
|
|
|
Normal operation |
Active |
Active |
Active |
Green |
25 W (maximum) |
|
|
|
|
|
17 W (typical) |
|
|
|
|
|
|
|
|
|
|
|
|
Active-off mode |
Inactive |
Inactive |
Blanked |
Amber |
Less than 1 W |
|
|
|
|
|
|
Switch off |
- |
- |
- |
Off |
Less than 0.5 |
W |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E190S |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA Modes |
Horizontal |
Vertical Sync |
Video |
Power |
Power Consumption |
|
|
Sync |
|
|
Indicator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Normal operation |
Active |
Active |
Active |
Green |
25 W (maximum) |
|
|
|
|
|
|
19 W (typical) |
|
|
|
|
|
|
|
|
Active-off mode |
Inactive |
Inactive |
Blanked |
Amber |
Less than 1 W |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Switch off |
- |
- |
- |
Off |
Less than 0.5 |
W |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: This monitor is ENERGY STAR®-compliant.
NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector
Pin |
15-pin Side of the |
Number |
Connected Signal Cable |
|
|
1Video-Red
2Video-Green
3Video-Blue
4GND
5Self-test
6GND-R
7GND-G
8GND-B
9Computer 5V/3.3V
10GND-sync
11GND
12DDC data
13H-sync
14V-sync
15DDC clock
Flat Panel Specifications
Model |
E170S |
E190S |
|
|
|
Screen type |
Active matrix - TFT LCD |
Active matrix - TFT LCD |
|
|
|
|
|
|
Panel type |
TN |
TN |
Screen dimensions |
17 inches (17-inch viewable image size) |
19 inches (19-inch viewable image size) |
|
|
|
Preset display area: |
|
|
Horizontal |
337.9 mm (13.3 inches) |
376.3 mm (14.8 inches) |
Vertical |
270.3 mm (10.6 inches) |
301.1 mm (11.8 inches) |
|
|
|
Pixel pitch |
0.264 mm |
0.294 mm |
|
|
|
Viewing angle |
160° (vertical) typical, 160° (horizontal) typical |
160° (vertical) typical, 160° (horizontal) typical |
|
|
|
Luminance output |
250 CD/m² (typical) |
250 CD/m² (typical) |
|
|
|
Contrast ratio |
800 to 1 (typical) |
800 to 1 (typical) |
|
|
|
Faceplate coating |
Antiglare with hard-coating 3H |
Antiglare with hard-coating 3H |
|
|
|
Backlight |
2 CCFLs backlight |
2 CCFLs backlight |
|
|
|
Response Time |
5 ms typical |
5 ms typical |
|
|
|
Color Depth |
16.7 mil colors |
16.7 mil colors |
|
|
|
Color Gamut |
85 %* |
85 %* |
|
|
|
* E170S/E190S Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%).
Resolution
Model |
E170S/E190S |
|
|
|
|
Horizontal scan range |
30 kHz to 81 kHz (automatic) |
|
|
|
|
Vertical scan range |
56 Hz to 76 Hz (automatic) |
|
|
|
|
Maximum preset resolution |
1280 x 1024 at 60 Hz |
|
|
|
|
|
|
|
Preset Display Modes
E170S/E190S
Display Mode |
Horizontal |
Vertical Frequency |
Pixel Clock |
Sync Polarity |
|
|
Frequency (kHz) |
(Hz) |
(MHz) |
(Horizontal/Vertical) |
|
VGA, 720 x 400 |
31.5 |
70.1 |
28.3 |
-/+ |
|
VGA, 640 x 480 |
31.5 |
60.0 |
25.2 |
-/- |
|
VESA, 640 x 480 |
37.5 |
75.0 |
31.5 |
-/- |
|
VESA, 800 x 600 |
37.9 |
60.3 |
40.0 |
+/+ |
|
VESA, 800 x 600 |
46.9 |
75.0 |
49.5 |
+/+ |
|
VESA, 1024 x 768 |
48.4 |
60.0 |
65.0 |
-/- |
|
VESA, 1024 x 768 |
60.0 |
75.0 |
78.8 |
+/+ |
|
VESA, 1152 x 864 |
67.5 |
75.0 |
108.0 |
+/+ |
|
VESA, 1280 x 1024 |
64.0 |
60.0 |
108.0 |
+/+ |
|
VESA, 1280 x 1024 |
80.0 |
75.0 |
135.0 |
+/+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
Electrical
Model |
E170S/E190S |
|
|
Video input signals |
Analog RGB, 0.7 Volts +/- 5%, 75 ohm input impedance |
|
|
Synchronization input signals
separate horizontal and vertical,
3.3V Cmos or 5V TTL level, positive or negative sync.
AC input voltage/frequency/current |
100 to 240 VAC / 50-60 Hz / 1.6 A (RMS) Max. |
Inrush iso surge current
120 V: 40 A (Max.)
240 V: 60 A (Max.)
Physical Characteristics
Model |
E170S |
E190S |
|
||
|
|
|
|
|
|
Connector type |
• |
D-sub: blue connector |
• |
D-sub: blue connector |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
D-sub: Detachable, Analog, 15 pin, |
• |
D-sub: Detachable, Analog, 15 pin, |
|
Signal cable type |
|
shipped attached to the monitor |
|
shipped attached to the monitor |
|
|
|
|
|
|
|
Dimensions (with stand) |
|
|
|
|
|
|
|
|
|
||
Height |
380.6 mm (14.98 inches) |
411.2 mm (16.19 inches) |
|
||
|
|
|
|
||
Width |
374.5 mm (14.74 inches) |
412.7 mm(16.25 inches) |
|
||
|
|
|
|
||
Depth |
136.9 mm (5.39 inches) |
144.4 mm (5.67 inches) |
|
||
|
|
|
|
|
|
Dimensions (without stand) |
|
|
|
|
|
|
|
|
|
||
Height |
307.0 mm (12.09 inches) |
337.7 mm (13.30 inches) |
|
||
|
|
|
|
||
Width |
374.5 mm (14.74 inches) |
412.7 mm (16.25 inches) |
|
||
|
|
|
|
||
Depth |
59.0 mm (2.32 inches) |
59.0 mm (2.32 inches) |
|
||
|
|
|
|
|
|
Stand dimensions |
|
|
|
|
|
|
|
|
|
||
Height |
297.15 mm (11.70 inches) |
312.5 mm (12.30 inches) |
|
||
|
|
|
|
||
Width |
275 mm (10.83 inches) |
291.6 mm (11.48 inches) |
|
||
|
|
|
|
||
Depth |
136.9 mm (5.39 inches) |
144.4 mm (5.67 inches) |
|
||
|
|
|
|
|
|
Weight |
|
|
|
|
|
|
|
|
|
||
Weight with packaging |
5.21 kg (11.5 lb) |
6.27 kg ( 13.79 lb) |
|
||
|
|
|
|
||
Weight with stand assembly and cables |
4.31 kg (9.5 lb) |
5.06 kg ( 11.13 lb) |
|
||
|
|
|
|
|
|
Weight without stand assembly |
|
|
|
|
|
(for wall mount or VESA mount considerations - |
3.04 kg (6.7 lb) |
3.94 kg ( 8.67 lb) |
|
||
no cables) |
|
|
|
|
|
|
|
|
|
||
Weight of stand assembly |
0.91 kg (2.01 lb) |
0.97 kg (2.13 lb) |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Environmental |
|
|
|
|
|
|
|
|
|
||
Model |
E170S |
E190S |
|
||
|
|
|
|
|
|
Temperature |
|
|
|
|
|
|
|
|
|
||
Operating |
5° to 35° C (41° to 95°F) |
5° to 35° C (41° to 95°F) |
|
||
|
|
|
|
||
Non-operating |
Storage: -20° to 60° C (-4° to 140° F) |
Storage: -20° to 60° C (-4° to 140° F) |
|
||
Shipping: -20° to 60° C (-4° to 140° F) |
Shipping: -20° to 60° C (-4° to 140° F) |
|
|||
|
|
||||
|
|
|
|
|
|
Humidity |
|
|
|
|
|
|
|
|
|
||
Operating |
10% to 80% (non-condensing) |
10% to 80% (non-condensing) |
|
||
|
|
|
|
||
Non-operating |
Storage: 5% to 90% (non-condensing) |
Storage: 5% to 90% (non-condensing) |
|
||
Shipping: 5% to 90% (non-condensing) |
Shipping: 5% to 90% (non-condensing) |
|
|||
|
|
||||
|
|
|
|
|
|
Altitude |
|
|
|
|
|
|
|
|
|
||
Operating |
3,048 m (12,000 ft) max |
3,048 m (12,000 ft) max |
|
||
|
|
|
|
||
Non-operating |
9,144 m (40,000 ft) max |
9,144 m (40,000 ft) max |
|
||
|
|
|
|
||
Thermal dissipation |
86.2 BTU/hour (maximum) |
86.2 BTU/hour (maximum) |
|
||
58.6 BTU/hour (typical) |
65.5 BTU/hour (typical) |
|
|||
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If required,
the user can select different settings, but in most cases monitor installation is automatic.
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a "bright dot." When the pixel remains black, it is known as a "dark dot."
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: support.dell.com.
Maintenance Guidelines
Caring for Your Monitor
CAUTION: Read and follow the Safety Instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
•To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
•Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.
•If you notice a white powder when you unpack your monitor, wipe it off with a cloth.
•Handle your monitor with care as dark-colored monitors may scratch and show white scuff marks more than lighter-colored monitors.
•To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.
Back to Contents Page