DellTM D1920 monitor
User Manual
|
|
|
English |
|
Pyccкий |
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|||||
|
|
|
Deutsch |
|
Svenska |
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|||||
|
|
|
Français |
|
Suomi |
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|||||
|
|
|
Italiano |
|
Dansk |
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|||||
|
|
|
Español |
|
Polski |
|
|
|
Norsk |
|
|
|
|
|
|
|
|||
|
|
|
Portuquês |
|
Nederlands |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
|
|
|
|
Model: D1920f |
|
|
|
|
|
PRECAUTIONS
Information for users applicable in United States of America
Installation
Power connection
Maintenance
Transporting the monitor
GETTING STARTED
Package contents
Monitor installation
Identifying parts and controls
Working with OSD Group
Customizing Your Monitor
Hotkeys
Function Keys Operation
OSD Icon List
Troubleshooting
Technical Features and Specifications
1
1
1
1
1
2
2
3
3
3
4
4
5
6
7
PRECAUTIONS
Information for users applicable in United States of America
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.
Installation
1.Do not cover or block the ventilation ports on the rear of the monitor.
2.Do not install the monitor close to heat sources such as radiators or air ducts, or in a location exposed to direct sunlight, excessive dust, mechanical vibration,or shock.
3.The apparatus shall only be used between 5° tilted forward and 15° tilted backward as normal operation position. If the tilt angle exceeds 15°, it shall be used for wall mounting or packaging only.
Power connection
1.Use the correct power cord for your local voltage. 2.Use an accessible outlet close to the monitor.
3.Do not allow anything to rest on the power cable. 4.Only use the power adapter attached to the monitor.
5.Disconnect the power cable from the power supply if:
5.1You will not use the monitor for an extended period.
5.2The cable is damaged or frayed.
5.3The monitor has been dropped or the cabinet damaged.
5.4A distinct change in performance indicates a need for servicing.
Maintenance
1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any abrasive materials or solvents such as alcohol or benzene.
2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as pens or screwdrivers, as the screen may scratch.
3.Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, as fire, electric shock, and / or unit failure may result.
Transporting the monitor
1.When carrying the display for repair or service, disassemble the monitor and pack in its original packing. To disassemble the neck and base, press the "release button" located on the back of the neck and detach the neck/base, then remove the base from the neck by pressing the “release tabs” located under the base plate and pull the neck off the base, finally use the original carton and packing materials to wrap the display and its accessories.
- 1 -
Loading...