Dell 857-10569 User Manual

0 (0)

Dell™ IN1930/IN2030M Monitor User's Guide

About Your Monitor

Setting Up the Monitor

Operating the Monitor

Troubleshooting

Appendix

Notes, Cautions, Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Information in this document is subject to change without notice.

© 2011 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model IN1930f/IN2030Mf/IN1930c/IN2030Mc

February 2011 Rev. A00

Back to Contents Page

About Your Monitor

Dell™ IN1930/IN2030M Monitor User's Guide

Package Contents

Product Features

Identifying Parts and Controls

Monitor Specifications

Plug and Play Capability

LCD Monitor Quality & Pixel Policy

Maintenance Guidelines

Package Contents

Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell™ if anything is missing.

NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.

Monitor

Stand Riser

Stand Base

Power Cable

VGA Cable (attached to the monitor)

Drivers and Documentation media

Quick Setup Guide

Product Information Guide

Product Features

The Dell™ IN1930/IN2030M flat panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display. The monitor's features include:

IN1930: 47.0 cm (18.5 inches) viewable area display. 1366 x 768 resolution, plus full-screen support for lower resolutions.

IN2030M: 50.8 cm (20.0 inches) viewable area display. 1600 x 900 resolution, plus full-screen support for lower resolutions.

Tilt adjustment capability.

Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.

Plug and play capability if supported by your system.

On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), and product documentation.

ENERGY STAR compliant.

Security lock slot.

EPEAT™ Silver compliant.

RoHS compliant.

Identifying Parts and Controls

Front View

1.Function buttons (For more information, see Operating the Monitor)

2.Power On/Off button (with LED indicator)

Back View

Label

Description

Use

 

 

 

1

Barcode serial number label

Refer to this label if you need to contact Dell for technical support.

2

Regulatory rating label

Lists the regulatory approvals.

 

 

 

3

VESA mounting holes (100 mm)

To mount the monitor.

 

 

 

4

Security lock slot

Use a security lock with the slot to help secure your monitor.

 

 

 

5

Dell soundbar mounting brackets

To attach the optional Dell Soundbar.

 

 

 

Side View

Right Side

Bottom View

IN1930:

IN2030M:

 

 

Label

Description

Use

 

 

 

1

AC power connector

To connect the monitor power cable.

 

 

 

2

VGA connector

To connect your computer to the monitor using a VGA cable.

 

 

 

Label

Description

U

1

AC power connector

To

 

 

 

2

DVI connector

To

 

 

 

3

VGA connector

To

 

 

 

Monitor Specifications

The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.

Power Management Modes

If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling o

IN1930:

VESA Modes

Horizontal Sync

Vertical Sync

Video

Power Indicator

Power Consumption

 

 

 

 

 

 

Normal operation

Active

Active

Active

White

22 W (Maximum)

 

 

 

 

 

18 W (Typical)

 

 

 

 

 

 

Active-off mode

Inactive

Inactive

Blank

Amber

Less than 1 W

 

 

 

 

 

 

Switch off

-

-

-

Off

Less than 0.5 W

 

 

 

 

 

 

IN2030M:

 

 

 

 

 

 

 

 

 

 

 

VESA Modes

Horizontal Sync

Vertical Sync

Video

Power Indicator

Power Consumption

 

 

 

 

 

 

Normal operation

Active

Active

Active

White

25 W (Maximum)

 

 

 

 

 

20 W (Typical)

 

 

 

 

 

 

Active-off mode

Inactive

Inactive

Blank

Amber

Less than 1 W

 

 

 

 

 

 

Switch off

-

-

-

Off

Less than 0.5 W

 

 

 

 

 

 

The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be dis

Activate the computer and monitor to gain access to the OSD.

NOTE: Dell IN1930/IN2030M monitor is ENERGY STAR®-compliance.

*Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

**Maximum power consumption with max luminance and contrast.

Pin Assignments

Dell 857-10569 User Manual

15-pin D-Sub connector

Pin Number Monitor Side of the 15-pin Side Signal Cable

1Video-Red

2Video-Green

3Video-Blue

4GND

5Self-test

6GND-R

7GND-G

8GND-B

9DDC +5 V

10GND-sync

11GND

12DDC data

13H-sync

14V-sync

15DDC clock

DVI Connector

Pin

24-pin Side of the Connected Signal

Number

Cable

1TMDS RX2-

2TMDS RX2+

3TMDS Ground

4Floating

5Floating

6DDC Clock

7DDC Data

8Floating

9TMDS RX1-

10TMDS RX1+

11TMDS Ground

12Floating

13Floating

14+5 V power

15Self test

16Hot Plug Detect

17TMDS RX0-

18TMDS RX0+

19TMDS Ground

20Floating

21Floating

22TMDS Ground

23TMDS Clock+

24TMDS Clock-

Plug and Play Capability

You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Dat system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.

Flat Panel Specifications

Model number

Dell IN1930 monitor

Dell IN2030M monitor

 

 

 

Screen type

Active matrix - TFT LCD

Active matrix - TFT LCD

 

 

 

Panel Type

TN

TN

 

 

 

 

Screen dimensions

47.0 cm (18.5 inches) (18.5-inch wide

50.8 cm (20 inches) (20-inch wide

viewable image size)

viewable image size)

 

 

Preset display area:

 

 

Horizontal

409.8 mm (16.14 inches)

442.8 mm (17.43 inches)

Vertical

230.4 mm (9.07 inches)

249.1 mm (9.81 inches)

 

 

 

Pixel pitch

0.300 mm

0.277 mm

 

 

 

Viewing angle:

 

 

Horizontal

170 ° typical

170 ° typical

Vertical

160 ° typical

160 ° typical

 

 

 

Luminance output

250 cd/m² (typical)

250 cd/m² (typical)

Contrast ratio

1000 to 1 (typical)

1000 to 1 (typical)

 

 

 

Dynamic Contrast Ratio

8,000,000 to 1 (typical) *

8,000,000 to 1 (typical) *

 

 

 

Faceplate coating

Antiglare with hard-coating 3H

Antiglare with hard-coating 3H

 

 

 

Backlight

LED light bar system

LED light bar system

 

 

 

Response Time

5 ms typical (black to white)

5 ms typical (black to white)

 

 

 

Color Depth

16.7 mil colors

16.7 mil colors

 

 

 

Color Gamut

82 % (typical) **

82 % (typical) **

 

 

 

 

*Based on estimation.

**[IN1930/IN2030M] color gamut (typical) is based on CIE1976 (82 %) and CIE1931 (72 %) test standards.

Resolution Specifications

Model number

Dell IN1930 monitor

Dell IN2030M monitor

 

 

 

 

 

Scan range

 

 

 

Horizontal

30 kHz to 83 kHz (automatic)

30 kHz to 83 kHz (automatic)

 

Vertical

56 Hz to 75 Hz (automatic)

56 Hz to 75 Hz (automatic)

 

 

 

 

 

Maximum preset resolution

1366 x 768 at 60 Hz

1600 x 900 at 60 Hz

 

 

 

 

 

 

 

 

 

 

 

Electrical Specifications

Model number

Dell IN1930/IN2030M monitor

Video input signals

Analog RGB: 0.7 Volts +/- 5 %, 75 ohm input impedance

Separate horizontal and vertical Synchronization input signals synchronizations, polarity-free TTL level, SOG

(Composite SYNC on green)

AC input voltage / frequency / current

100 VAC to 240 VAC/50 Hz or 60 Hz + 3 Hz/1.5 A (Max.)

Inrush current

120 V: 30 A (Max.)

240 V: 60 A (Max.)

Preset Display Modes

The following table lists the preset modes for which Dell guarantees image size and centering:

IN1930:

Display Mode

Horizontal Frequency

Vertical Frequency

Pixel Clock (MHz)

Sync Polarity

 

 

(kHz)

(Hz)

 

(Horizontal/Vertical)

 

 

 

 

 

 

 

 

 

 

 

 

 

VESA, 720 x 400

31.5

70.0

28.3

-/+

 

 

 

 

 

 

 

 

 

 

 

 

 

VESA, 640 x 480

31.5

60.0

25.2

-/-

 

 

 

 

 

 

 

 

 

 

 

 

 

VESA, 640 x 480

37.5

75.0

31.5

-/-

 

 

 

 

 

 

 

 

 

 

 

 

 

VESA, 800 x 600

37.9

60.0

40.0

+/+

 

 

 

 

 

 

 

VESA, 800 x 600

46.9

75.0

49.5

+/+

 

 

 

 

 

 

 

 

 

 

 

 

 

VESA, 1024 x 768

48.4

60.0

65.0

-/-

 

 

 

 

 

 

 

 

 

 

 

 

 

VESA, 1024 x 768

60.0

75.0

78.8

+/+

 

 

 

 

 

 

 

 

 

 

 

 

 

VESA, 1280 x 1024

80.0

75.0

135.0

+/+

 

 

 

 

 

 

 

 

 

 

 

 

 

VESA, 1366 x 768

47.7

60.0

85.5

+/+

 

 

 

 

 

 

 

 

 

 

 

 

 

IN2030M:

 

 

 

 

 

 

 

 

 

 

 

Display Mode

Horizontal Frequency

Vertical Frequency

Pixel Clock (MHz)

Sync Polarity

 

 

(kHz)

(Hz)

 

(Horizontal/Vertical)

 

 

 

 

 

 

 

VESA, 720 x 400

31.5

70.1

28.3

-/+

 

 

 

 

 

 

 

VESA, 640 x 480

31.5

59.9

25.2

-/-

 

 

 

 

 

 

 

VESA, 640 x 480

37.5

75.0

31.5

-/-

 

 

 

 

 

 

 

VESA, 800 x 600

37.9

60.3

40.0

+/+

 

VESA, 800 x 600

46.9

75.0

49.5

+/+

 

 

 

 

 

 

 

VESA, 1024 x 768

48.4

60.0

65.0

-/-

 

 

 

 

 

 

 

VESA, 1024 x 768

60.0

75.0

78.8

+/+

 

 

 

 

 

 

 

VESA, 1152 x 864

67.5

75.0

108.0

+/+

 

 

 

 

 

 

 

VESA, 1280 x 1024

64.0

60.0

108.0

+/+

 

 

 

 

 

 

 

VESA, 1280 x 1024

80.0

75.0

135.0

+/+

 

 

 

 

 

 

 

VESA, 1600 x 900

55.5

60.0

97.8

+/-

 

 

 

 

 

 

 

 

 

 

 

 

 

Physical Characteristics

The following table lists the monitor's physical characteristics:

Model Number

Dell IN1930 monitor

Dell IN2030M monitor

 

 

 

 

 

 

 

D-subminiature, blue connector;

Connector type

D-subminiature, blue connector

 

 

 

 

DVI-D: White connector

 

 

 

 

 

 

 

D-sub: Detachable, Analog, 15 pin, shipped

Signal cable type

Analog: Detachable, D-Sub, 15 pins, shipped

attached to the monitor

attached to the monitor

 

 

 

 

 

 

 

DVI-D: Detachable, DVI-D, Solid pins (optional)

 

 

 

Dimensions: (with stand)

 

 

Height

349.10 mm (13.74 inches)

367.78 mm (14.48 inches)

Width

445.41 mm (17.54 inches)

478.60 mm (18.84 inches)

Depth

163.78 mm (6.45 inches)

163.78 mm (6.45 inches)

 

 

 

Dimensions: (without stand)

 

 

Height

266.05 mm (10.47 inches)

284.89 mm (11.22 inches)

Width

445.41 mm (17.54 inches)

478.60 mm (18.84 inches)

Depth

52.30 mm (2.06 inches)

52.30 mm (2.06 inches)

 

 

 

Stand dimensions:

 

 

 

 

 

 

Height

141.50 mm (5.57 inches)

141.50 mm (5.57 inches)

Width

236.33 mm (9.30 inches)

236.33 mm (9.30 inches)

Depth

163.78 mm (6.45 inches)

163.78 mm (6.45 inches)

 

 

 

Weight:

 

 

Weight with packaging

3.94 kg (8.69 lb)

4.25 kg (9.37 lb)

 

 

 

Weight with stand assembly and cables

3.26 kg (7.19 lb)

3.53 kg (7.78 lb)

 

 

 

Weight without stand assembly

 

 

(For wall mount or VESA mount

2.64 kg (5.82 lb)

2.91 kg (6.42 lb)

considerations - no cables)

 

 

 

 

 

Weight of stand assembly

0.33 kg (0.73 lb)

0.33 kg (0.73 lb)

 

 

 

 

Environmental Characteristics

The following table lists the environmental conditions for your monitor:

 

Model Number

Dell IN1930 monitor

Dell IN2030M monitor

 

 

 

 

 

 

 

Temperature

 

 

 

 

Operating

0 ° C to 40 ° C (32 ° F to 104 ° F)

0 ° C to 40 ° C (32 ° F to 104 ° F)

 

 

Non-operating

Storage: -20 ° C to 60 ° C (-4 ° F to

Storage: -20 ° C to 60 ° C (-4 ° F to

 

 

 

 

140 ° F)

140 ° F)

 

 

 

 

Shipping: -20 ° C to 60 ° C (-4 ° F to

Shipping: -20 ° C to 60 ° C (-4 ° F to

 

 

 

 

140 ° F)

140 ° F)

 

 

Humidity

 

 

 

 

 

Operating

10 % to 80 % (non-condensing)

10 % to 80 % (non-condensing)

 

 

 

 

 

 

 

Non-operating

Storage: 5 % to 90 % (non-

Storage: 5 % to 90 % (non-

 

 

condensing)

condensing)

 

 

 

 

Shipping: 5 % to 90 % (non-

Shipping: 5 % to 90 % (non-

 

 

 

 

condensing)

condensing)

 

 

 

 

 

 

 

Altitude

 

 

 

 

Operating

4,485 m (14,700 ft) max

4,485 m (14,700 ft) max

 

 

Non-operating

12,191 m (40,000 ft) max

12,191 m (40,000 ft) max

 

 

 

 

 

 

 

 

Thermal dissipation

75.09 BTU/hour (maximum)

85.33 BTU/hour (maximum)

 

 

61.43 BTU/hour (typical)

68.26 BTU/hour (typical)

 

 

 

 

 

 

 

 

 

 

 

LCD Monitor Quality & Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pix spot.When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.”

In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered norma

Support site at: support.dell.com.

Maintenance Guidelines

Caring for Your Monitor

CAUTION: Read and follow the safety instructions before cleaning the monitor.

CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:

To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the cleaners, or compressed air.

Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.

If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.

Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.

Back to Contents Page

Back to Contents Page

Appendix

Dell™ IN1930/IN2030M Monitor User's Guide

Safety Instructions

FCC Notice (U.S. Only) and Other Regulatory Information

Contacting Dell

WARNING: Safety Instructions

WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.

For information on safety instructions, see the Product Information Guide.

FCC Notices (U.S. Only) and Other Regulatory Information

For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference

(2)this device must accept any interference received including interference that may cause undesired operation

Contacting Dell

For customers in the United States, call 800-WWW-DELL (800-999-3355).

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1.Visit support.dell.com.

2.Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.

3.Click Contact Us on the left side of the page.

4.Select the appropriate service or support link based on your need.

5.Choose the method of contacting Dell that is convenient for you.

Back to Contents Page

Back to Contents Page

Setting Up Your Monitor

Dell™ IN1930/IN2030M monitor

If you have a Dell™ desktop or a Dell™ portable computer with internet access

1.Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.

2.After installing the drivers for your graphics adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again.

NOTE: If you are unable to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M), please contact Dell™ to inquire about a graphics adapter that supports these resolutions.

Back to Contents Page

Back to Contents Page

Setting Up Your Monitor

Dell™ IN1930/IN2030M monitor

If you have a non Dell™ desktop, portable computer, or graphics card

In Windows XP:

1.Right-click on the desktop and click Properties.

2.Select the Settings tab.

3.Select Advanced.

4.Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).

5.Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).

6.After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again.

In Windows Vista® or Windows 7:

1.Right-click on the desktop and click Personalization.

2.Click Change Display Settings.

3.Click Advanced Settings.

4.Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).

5.Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).

6.After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again.

NOTE: If you are unable to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M), please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution of 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M).

Back to Contents Page

Loading...
+ 28 hidden pages