PLASMA DISPLAY
USER’S MANUAL
D P - 4 2 G P
D P - 4 2 S P
D P - 4 2 W P
Help Line No. : 01189 252577
DAEWOO ELECTRONICS CO., LTD.
Features
• 106cm (42”)super-wide, 8.0cm Ultra Slim Wall-mounting Monitor
DAEWOO PLASMA opens a new era Monitor era with advanced plasma technology – 8cm ultra slim Monitor. Light weight of only 30kg allows installation in a narrow space.
•DVD Direct Connection / Outstanding Picture Quality Digital Broadcasts Receive (SD Grade)
DVD can be directly connected to the unit so that you can view clear digital images. You can enjoy even higher quality images. by connecting digital broadcasting receiver with which digital broadcasts can be viewed.
• PC Direct Connection
PC can be connected to the PDP without a separate device, and can be used as a monitor so that the effect of presentation gets maximized, making it more popular in various events and exhibitions.
• PDP Monitor with Minimized Noise
Although the PDP Monitor had an outstanding picture quality, there was a problem with the noise caused by the cooling fan until now. The DAEWOO PLASMA does not use a cooling fan any more, since it adopts a self air circulation method with excellent heat transfer, eliminating the fan noise.
•160 Wide-Angle Viewing Area
•Flat Panel with No Distortion and Colour Blurring
Since Plasma Monitor has no problems such as distortion, blurring, flickering unlike existing CRT type, you can enjoy Home Theatre Quality Pictures.
• Various Video Control
- 11 Languages OSD - 20 Step screen zooming function - Full-screen still function
-Various aspect ratio (16:9, Panorama, Normal, Enlarge LB, Enlarge LBS)
•Accepts Worldwide: VGA, SVGA, XGA, UXGA.
•Unlimited Voltage Restriction(100-240V~ 50/60Hz)
This Owner’s Manual presents safety precautions and how to use the product. After reading it thoroughly, use the product safely.
Keep this manual where the user can see it easily.
Failure to comply with warnings and cautions for the safe use of electric appliances may cause fire or human injury.
FCC RF INTERFERENCE STATEMENT
NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio, TV technical for help.
-Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the guarantee or manufacturer could void the users authority to operate such equipment,
Safety Precautions
Always obey all safety messages.
•All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet.
•Do not disassemble or replace any parts of the monitor.
Refer to a qualified service personnel for repair.
WARNING
You can be killed or seriously injured if you do not follow instructions.
Power
During a lightning storm, or when it is left unattended and unused for a long period of time, unplug it from the wall outlet.
It can result in fire.
This product must be properly grounded.
•Improper grounding may cause malfunction or electric shock.
•When proper grounding is not possible, install circuit breaker.
•Do not ground to gas pipe, water pipe, lightning rod, and telephone line.
When unplugging your monitor, always grip plug firmly and pull straight out from the receptacle.
It can result in fire or electric shock due to a damaged power cord.
During a lightning storm, unplug the monitor from the wall outlet, and do not touch the antenna.
It can cause fire or electric shock.
Installation
Do not use this product in the neighborhood of a bath or shower.
It can result in electric shock or fire.
Do not place this monitor on an unstable cart, stand, or table
It may cause the product and cart to overturn, damaging equipment or causing possible injury.
4
No objects filled with liquids, such as vases, shall be placed on the monitor.
Spilled liquids may cause electric shock or fire.
Do not disassemble batteries, and do not allow children to swallow them.
Heavy metal may contaminate environment, and can be harmful or detrimental to human health. (If children swallow the batteries, go to the hospital and consult with a doctor.)
While Using Monitor
Do not open the cover (or back) because high voltage is present within the monitor’s enclosure.
It may cause electric shock.
Do not allow children to play or hang on the monitor.
These actions may tip it over, causing personal injury.
Do not spray water to the wipe with damp cloth.
It may cause electric shock or fire
Never push objects of any kind into this product through openings at the back of the monitor.
It may cause fire or electric shock.
Do not place a candle or a lighted cigarette on the monitor.
If these fall into the inside of the monitor, it may cause a fire or explosion.
Unplug the monitor from the wall outlet when smoke or a strange smell occurs, then refer servicing to your a service personnel.
If continued to be used, it may cause fire or electric shock.
5
Safety Precautions
Always obey all safety messages.
•All the safety and operating instructions should be read before the product is operated.
CAUTION
You can be injured or this product or any other of your property can be damaged if you don’t follow instructions.
Power
When moving your monitor, remove the power plug, antenna, and cables, and let at least two people move it by more than two people..
Failure to follow this instruction can result in electric shock or personal injury.
Installation
Do not install where there is oil, smog, moist, and dust
It may cause malfunction.
For proper ventilation, separate the product from the wall, and keep a distance of more than 10cm.
Due to the increase of temperature inside the
If you wish to install this wall or ceiling, refer to a
Failure to do so may cause products and injury to human
Do not touch the power plug with wet hands when plugging or unplugging.
It can result in a risk of electric shock.
where it will be exposed to product should not be radiators, stoves, etc.
Do not place the monitor where ventilation is not ensured.
Due to the increase of temperature inside the Monitor, it may cause fire.
When using an outside antenna system, do not install it in the vicinity of overhead power lines.
When antenna touches such power lines, it may cause electric shock.
6
CAUTION
You can be injured or this product or any other of your property can be damaged if you do not follow instructions.
During Use
Do not wipe the monitor using a cloth damped with chemicals (benzene, thinner, etc.).
Monitor appearance may be marred. (Unplug the power plug and wipe with soft cloth.) 
Do not place heavy objects or heat sources on the power cord.
It may damage the power cord, causing fire or electric shock.
Do not grip speakers when moving the monitor attached with speakers.
When moving the monitor while gripping the speakers, the speakers may be fallen away from the monitor due to its weight, causing personal injury.
or cover on
ventilation, the causing fire.
When the monitor is placed on a cart or table, the front side of the Monitor should not project outward.
Unbalance may cause the monitor to drop, resulting in personal injury or equipment malfunction and damage.
When watching the TV, the distance between the Monitor screen and your eye should be as 5~7 times far as the diagonal distance of the Monitor.
Watching the TV for a long time may hurt your eye sight.
7
Checking Accessories
Note
Supplied Accessories
Check to be sure that the following items are packed with your Monitor.
You require a scart to A/V cable in the U,K.
1UNIT |
Batteries (AAA) |
2UNITS |
1UNIT |
PC(15pin) Cable |
1UNIT |
A/V Cable |
2UNITS |
AC Cable 1 UNIT
8
Optional Accessories
Speakers
Note
The following items are optional accessories.
Refer purchasing optional accessories from Daewoo Electronics Local Dealer or the dealer from where you purchased the unit.
DSP-SP20/SP21/SP22
Speaker Main Unit
Dimension : 100(W) x 628(H) 83(D)mm
Including Speaker Stand
Dimension : 170(W) x 729(H) x 194(D)mm
Audio Amplifier : 8W + 8W
Impedance : 8Ω
Weight : 7.5kg
DSP-ST20/ST21/ST22
Dimension : 667(W) x 238(H) x 320(D)mm
Weight : 7kg
DSP-HG10
-Variable Angles : 0O, 10O, 15O, 20O
Speaker Main Unit
-Dimension : 601(W) x 592(H) x 35(D)mm Including Stand
-Weight : 4.5kg.
9
CONTENTS
PREPARATION
4 • Safety Precautions
12 • Panel Controls
13 • Remote control
BASICS
14 • Installation Instructions
15 • Connecting Speaker to PDP
CONNECTION
16 • Connecting PC
APPLICATION
20 • Selecting Auto Picture Mode
22 • Adjusting Screen Size
24 • Adjusting Screen Position and Size
26 • Enlarging Screen Size
28 • Watching a Still Image
29 • Adjusting Auto Sound Mode
30 • Customizing Sound Mode
32 • Selecting MENU Background Screen and Languages
44 • Setting Sleep Timer
MISCELLANY
35 • Before Requesting Service
36 • SPECIFICATIONS
11
Panel Controls
Front Panel, Back Panel, Remote Control
*Parts having same names in Plasma Display and Remote Control would function in exactly the same way.
Front
Power |
STAND BY/OPERATE |
• Power control sensor
|
Select when adjusting volume or |
Green - ON |
select/adjust “MENU.” |
Power button |
Press when moving “MENU.” |
Rear
R
L
PC INPUT |
RS-232C PORT |
EXTERNAL PORT |
R |
R |
AUDIO |
AUDIO |
L |
|
|
|
|
|
L |
R |
L |
|
PC INPUT |
G/Y |
B/Pb |
R/Pr |
H |
V |
EXTERNAL PORT |
SPEAKER(8 Ohms) |
AC IN |
|
RS-232C PORT |
|
RGB/COMPONENT INPUT |
|||||||
PC INPUT |
Used when upgrading, |
BNC G/Y, B/Pb, R/Pr, |
Used when connecting |
External Speaker |
Power |
|
etc. |
H, V Input |
PDP to External |
|
|
|
|
|
Equipment |
|
|
12
Loading...