Cub Cadet 22HP Z-Force 48, 18.5HP Z-Force 42 User Manual

0 (0)
Cub Cadet 22HP Z-Force 48, 18.5HP Z-Force 42 User Manual

Hydrostatic Zero-Turn

Residential Riding Mower

Turf Equipment

MODEL

18.5HP Z-Force 42

20HP Z-Force 44

22HP Z-Force 48

OPERATOR’S AND SERVICE MANUAL

TABLE OF CONTENTS

Foreword. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

General Safety Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 A. General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

B. Slope Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

C. Children . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 D. Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

A. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

B. Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 C. Initial Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

D. Zero Turn Break-In and Operating Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 A. Mower Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 B. Hydrostatic Drive System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 C. Electrical Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 D. Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 E. Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 F. Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 G.Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Performance Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 A. High Speed Tracking Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 B. Engine RPM Check and Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 C. Deck Corner Ball Wheel Roller Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 D. Deck Center Anti-Scalp Roller Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 E. Lap Bar Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 F. Deck Leveling Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Slope Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover

This product may be covered by one or more of the following patents:

D409,208; 5,946,894; 6,070,690; Pending

2

FORWARD

The Hydrostatic Zero-Turn Riding Mower provides superb maneuverability and mid-mount cutting. The machine incorporates many safety features that should be studied by all operators before use. The list of safety precautions should receive particular attention.

This manual presents all of the operating and maintenance instructions necessary to keep your mower at peak efficiency. If operated and maintained properly, your mower will give dependable service.

CAUTION:

Only thoroughly trained persons should operate and maintain this mower. This machine can cause serious injury to anyone who misuses it and does not understand its operation. For their personal safety, all operators are required to read this entire manual before operating the mower.

Hazard control and accident prevention are partially dependent upon the design and configuration of the equipment. Awareness, concern, prudence and proper training of the personnel involved in the operation, transport, maintenance and storage of the equipment, are essential for hazard control and accident prevention.

3

WARNING

The engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered, or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the State of California, the above is required by law (Section 4442 of the California Public Resources Code). Other States may have similar laws. Federal laws apply to federal lands. A spark arrester muffler may be available.

IMPORTANT

SAFE OPERATION PRACTICES

THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIO NS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. R EAD AN D FO LLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEM PTING TO OPER ATE YOUR UNIT. FAILURE TO COM PLY WITH THESE INSTRUCTIONS MAY RESULT IN

PERSONAL INJURY. WHEN YOU SEE THIS SYMBOL-

HEED ITS WARNING.

Your lawn mower was built to be operated according to the rules for safe operation

in this manual. As with any type of power equipment, carelessness or error on the DANGER part of the operator can result in injury. This lawn mower is capable of amputating

hands and feet or throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

GENERAL SAFETY

OPERATIONS

A. GENERAL OPERATION

1.Read, understand and follow all instructions in the manual and on the machine before starting. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Only allow responsible individuals familiar with the instructions to operate the machine. Know the controls and how to stop the machine quickly.

3.Do not put hands or feet under the cutting deck or near rotating parts.

4.Clear the area of objects such as rocks, toys, wire, etc. which could be picked up and thrown by the blades. A small object may have been overlooked and could be accidentally thrown by the mower in any direction and cause injury to you or a bystander. To help avoid a thrown objects injury, keep children, animals, bystanders and helpers at least 75 feet from the mower while it is in operation. Always wear safety glasses with side shields or safety goggles during operation or while performing and adjustment or repair, to protect eyes from

foreign objects. Stop the blades when crossing gravel drives, walks or roads.

5.Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area.

6.Never carry passengers.

7.Disengage the blades before shifting into reverse and backing up. Always look down and behind before and while backing.

8.Be aware of the mower and attachment discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the chute guard in place.

9.Slow down before turning. Operate the machine smoothly. Avoid erratic operation and excessive speed.

10.Never leave a running machine unattended. Always turn off the blades, place the transmission in neutral, set the parking brake, stop the engine and remove key before dismounting.

11.Turn off blades when not mowing.

12.Stop the engine and wait until the blades come to a complete stop before (a) removing the grass catcher or unclogging chute, or (b) making any repairs, adjusting or removing any grass or debris.

13.Mow only in daylight or good artificial light.

4

14.Do not operate the machine while under the influence of alcohol or drugs.

15.Watch for traffic when operating near or crossing roadways.

16.Use extra care when loading or unloading the machine into a trailer or truck. This unit should not be driven up or down a ramp onto a trailer or truck under power, because the unit could tip over causing serious personal injury. The unit must be pushed manually on a ramp to load or unload properly.

17.Never make a cutting height adjustment while the engine is running if the operator must dismount to do so.

18.Wear sturdy, rough-soled work shoes and closefitting slacks and shirts. Do not wear loose fitting clothes or jewelry. They can be caught in moving parts. Never operate a unit in bare feet, sandals or sneakers.

19.Check overhead clearance carefully before driving under power lines, wires, bridges or low hanging tree branches, before entering or leaving buildings, or in any other situation where the operator may be struck or pulled from the unit, which could result in serious injury.

20.Disengage all attachment clutches, set the parking brake to the on position and put the lap bars to the neutral or out position, before attempting to start the engine.

21.Your mower is designed to cut normal residential grass of a height no more than 10”. Do not attempt to mow through unusually tall, dry grass (e.g. pasture) or piles of dry leaves. Debris may build up on the mower deck or contact the engine exhaust presenting a potential fire hazard.

22.Use only accessories approved for this machine by Cub Cadet. Read, understand and follow all instructions provided with the approved accessory.

B. SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

For your safety, use the slope gauge included as a part of this manual (see pg. 27) to measure slopes before operating this unit on a sloped or hilly area. If the slope is greater than 15 degrees as shown on the slope gauge, do not operate this unit on that area or serious injury could result.

DO:

Mow across slopes, not up and down.

Remove obstacles such as rocks, limbs, etc.

Watch for holes, ruts or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low enough speed so that you will not have to stop while on the slope.

Follow the manufacture’s recommendations for counterweights with attachments to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Rapid acceleration or deceleration could cause the front of the machine to lift and rapidly flip over backwards, which could cause serious injury.

Avoid starting or stopping on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

DO NOT:

Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use the grass catcher on steep slopes.

C. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

1.Keep children out of the mowing area and in watchful care of an adult other than the operator.

2.Be alert and turn the machine off if children enter the area.

3.Before and when backing up, look behind and down for small children.

4.Never carry children, even with the blades off. They may fall off and be seriously injured or may interfere with safe machine operation.

5.Never allow children under 14 years old to operate the machine. Children 14 years and over should only operate the machine under

5

close parental supervision and proper instruc-

8.

After striking a foreign object, stop the engine,

tion.

 

 

remove the wire from the spark plug and thor-

6. Use extra care when approaching blind cor-

 

oughly inspect the mower for any damage.

ners, shrubs, trees or other objects that may

 

Repair the damage before restarting and

obscure your vision of a child or other hazard.

 

operating the machine.

7. Remove the key when the machine is left

9.

Grass catcher components are subject to

unattended to prevent unauthorized opera-

 

wear, damage and deterioration, which could

tion.

 

 

expose moving parts or allow objects to be

D. SERVICE

 

thrown. For your safety protection, frequently

 

check the components and replace with man-

1. Use extreme care in handling gasoline and

 

ufacturers recommended parts when neces-

other fuels. They are extremely flammable

 

sary.

 

and the vapors are explosive.

10.

Mower blades are sharp and can cut. Wrap

a.

Use only an approved container.

 

the blades or wear gloves, and use extra cau-

b.

Never remove fuel cap or add fuel with

 

tion when servicing blades.

 

the engine running. Allow the engine

11.

Check park brake operation frequently. Adjust

 

to cool at least two minutes before

 

and service as required.

 

refueling.

12.

Muffler, engine and belt guards become hot

c.

Replace the fuel cap securely and

 

during operation and can cause a burn. Allow

 

wipe off any spilled fuel before starting

 

to cool down before touching.

 

the engine as it may cause a fire or

13.

Do not change the engine governor settings

 

explosion.

 

or overspeed the engine. Excessive engine

d.

Extinguish all cigarettes, cigars, pipes

 

speeds are dangerous.

 

and other sources of ignition.

14.

Observe proper disposal laws and regula-

e.

Never refuel the machine indoors

 

tions. Improper disposal of fluids and materi-

 

because fuel vapors will accumulate in

 

als can harm the environment and the

 

the area.

 

ecology.

f.

Never store the fuel container or

 

a.

Prior to disposal, contact your local

 

machine inside where there is an open

 

 

Environmental Protection Agency to

 

flame or spark, such as a gas hot

 

 

determine the proper method for dis-

 

water heater, space heater or furnace.

 

 

posing of the waste. Recycling cen-

2. Never run a machine inside a closed area.

 

 

ters are established to properly

3. To reduce fire hazard, keep the machine free

 

 

dispose of materials in an environmen-

of grass, leaves or other debris build-up.

 

 

tally safe fashion.

Clean up oil or fuel spillage. Allow the

 

b.

Use proper containers when draining

machine to cool at least 5 minutes before stor-

 

 

fluids. Do not use food or beverage

ing.

 

 

 

containers that may mislead someone

4. Before cleaning, repairing or inspecting, make

 

 

into drinking from them. Properly dis-

certain the blade and all moving parts have

 

 

pose of the containers immediately fol-

stopped. Disconnect the spark plug wire, and

 

 

lowing the draining of fluids.

keep the wire away from the spark plug to pre-

 

c.

DO NOT pour oil or other fluids into the

vent accidental starting.

 

 

ground, down drain or into a stream,

5. Check the blade and engine mounting bolts at

 

 

pond, lake or other body of water.

frequent intervals for proper tightness. Also

 

 

Observe Environmental Protection

visually inspect blades for damage (e.g.,

 

 

Agency regulations when disposing of

excessive wear, bent, cracked). Replace with

 

 

oil, fuel, coolant, brake fluid, filters, bat-

blades which meet original equipment specifi-

 

 

teries, tires and other harmful waste.

cations.

15.

We do not recommend the use of high pres-

6. Keep all nuts, bolts and screws tight to be

 

sure washers to clean your unit. They may

sure the equipment is in safe working condi-

 

cause damage to electrical components; spin-

tion.

 

 

dles; pulleys; bearings; or the engine.

7.Never tamper with safety devices. Check their proper operation regularly. Use all guards as instructed in this manual.

WARNING-YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

6

SAFETY DECALS AND LABELS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Belt

 

 

 

 

 

 

 

 

 

DANGER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KEEP HANDS AND FEET AWAY.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Routing

 

 

 

 

 

 

 

 

 

DO NOT OPERATE MOWER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UNLESS CHUTE DEFLECTOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OR ENTIRE GRASS CATCHER IS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN ITS PROPER PLACE.

 

 

 

S30503

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ASSEMBLE CHUTE DEFLECTOR TO THIS UNIT BEFORE OPERATING.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part Number: 777I22250 (for 42” Deck)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part Number: 777I20847 (for 44” Deck)

 

 

 

 

 

Part Number: 777S30503

 

 

 

 

 

 

Part Number: 777I22215 (for 48” Deck)

 

 

 

 

 

 

 

 

 

 

 

DECKHIGHERLOWERCUTTING

To unlock, pull part of handle inward.

 

Lift unlocked handle to increase cutting height.

 

To lock, release upper part of handle to move outward.

I22093

Part Number: 777I22093

Part Number: 777I22094

Part Number: 777I22212

Part Number: 777S32161

 

A

 

 

 

DANGER

TH

 

 

 

 

 

 

 

 

 

 

 

VOI D

SERI OUSI NJURY OR

DEA

 

 

 

KEEP

HANDS AND FE ET AWA Y

FROM

 

 

 

R

 

 

 

 

 

 

 

OTATI

NGPARTS

 

 

BYTHE

 

 

REMO

 

 

 

 

 

BL

VEOBJECTS THATCAN BETHROWN

 

ES.

 

 

ADEIN

 

 

 

GLASS

 

 

 

DO

 

ANYDIRECTION.

WEARSAFETY

 

UND.

 

 

NOTM

 

 

AREARO

 

 

 

NE

 

OWWHENCHILDRENOROTHERS . .

 

 

VERCARRYCHILDRENEVENWITHBLADESOFF

 

 

 

USEEXTRA

 

NOTMOW

 

 

SLOP

 

 

CAUTI ONON SLOPES. DO

 

DOWN,

 

 

 

ESGREATERTHAN15. MOWUPAND

 

D.

G.

READO

NOTA

 

 

 

 

 

WSPEE

 

CROSS. AVOIDSUDDENTURNS.USELO

 

 

WORKIN

PER

 

 

 

 

 

 

 

 

AND

 

ATOR'

 

 

 

 

 

 

ACE

 

 

 

SMAN

 

SINPL

 

 

 

 

 

 

UAL. KEEPSAFETYDEVICE

 

 

 

 

 

Part Number: 777S30018

T O RE D UC E T H E RI SK O F I N J U RY,

D O N O T O P E R AT E M O W E R U N L E S S

DISCHARGE CHUTE COVER OR GRASS

C AT C H E R I S I N I T S P RO P E R P L AC E .

DANGER

KEEP HANDS and FEET AWAY

Part Number: 777I22197

Part Number: 777S30145

 

7

SPECIFICATIONS

Engine:

18.5HP, 20HP & 22HP Briggs & Stratton

Type:

Vertical air cooled V-Twin

 

 

Air Cleaner:

Paper element

 

 

Lube System:

Pressurized with oil filter, drain valve with hose

Starter:

12-volt electric

 

 

Traction Drive:

Engine to two variable-speed integrated hydraulic pump and

 

wheel motors on each drive wheel

 

 

Cutter Deck;Drive:

42”, 44" & 48” belt driven

 

 

Clutch:

Electric

Deck Lift:

Hand lever w/ lock for height adjustment

 

 

Cutting Height:

1-1/2" to 4"

 

 

No. of Blades

3, belt-driven, power take-off from engine

Controls:

Engine ignition and start switch; throttle & choke; left and right

 

steering levers; electric blade clutch switch; parking brake; mower

 

deck lift

 

 

Parking Brake:

Mechanical linkage attached to the brake handle

Front Caster Wheels:

11 x 5.00 - 5

 

 

Tire Pressure:

8-10 psi rear, 20-25 psi front caster

 

 

Drive Wheels:

18 x 6.50-8 for 42”, 18 x 8.50 - 8 for 44”, 18 x 9.50-8 for 48”

Frame:

Structural steel, all welded construction

 

 

Seat:

Adjustable seat. 4" Adjustment, optional arm rests for 42” & 44”,

 

standard arm rests for 48”

 

 

Fuel Tank:

One 5 gallon with shut off valve

 

 

Ground Speed:

0-7 MPH forward. 0-3 MPH reverse

Instrumentation:

Hour meter

 

 

Net Weight:

594 lbs w/42” deck, 598 lbs w/44" deck, 602 lbs w/48” deck

 

 

8

OPERATING INSTRUCTIONS

Figure. 1

Hour Meter

Electric Blade

Clutch Switch

 

 

Ignition Switch

A.General

1.When Mowing:

a.Keep adults, children, and pets away from the area to be mowed.

b.When operating this mower, in the forward direction, do not allow the steering levers to return to neutral on their own. Always maintain a firm grip on the levers, operate them smoothly and avoid any sudden movements of the levers when starting and stopping.

c.If the mower is equipped for side discharge, never use the mower without the discharge chute installed and placed in the down position.

d.Always remove debris and other objects from the area to be mowed (Note: debris and loose grass will reduce traction).

e.Mow only in daylight or good artificial light.

f.Watch for holes, sprinkler heads, and other hidden hazards.

g.Avoid driving too close to trees, creeks, ditches, sand traps, and other obstacles.

h.Before backing up, check behind and watch where you are going.

i.Always reduce speed when making a turn, and when grass is wet.

j.Always mow across slopes, never up and down the slope. Do not operate on steep slopes and slow down before turning.

Avoid turning downhill if possible, start at the bottom and work up to the top. Use extra care and go slowly when turning downhill.

k.Be careful when crossing gravel paths or roadways. Always turn off the blade clutch switch and wait until the blades stop rotat-

Figure. 2

Choke

Engine throttle

ing and raise the cutting deck to the transport position. Always allow other vehicles to have the right of way.

l.If you hit a solid object while mowing, turn off the blade clutch switch, place the steering levers in the neutral, opened-out position, move the throttle to slow, set the parking brake, shut off the engine, and take the key from the ignition switch. Inspect for damage. Repair the damage. Make sure the blades are in good condition and that the blade bolts are tight before restarting the engine.

m.Never leave the mower unattended without performing the following: turn off the blade clutch switch, placing the steering levers in the neutral open-out position, moving the throttle to slow, setting the parking brake, shutting off the engine and taking the key from the ignition switch.

n.Never walk or stand on the discharge side of the mower when the engine is running. Turn off the blade clutch switch if another person approaches while you are operating the mower.

o.Never attempt to operate the traction unit without having the mowing deck attached.

p.Keep the mower and especially the engine and hydraulic components clean and free of grease, grass, and leaves to reduce the chance of fire and permit proper cooling.

2.Safety Awareness when Mowing

a.Do not operate on steep slopes, those above 15 degrees (27% slope).

b.Avoid turning downhill if possible, use extra care and go slowly.

9

Loading...
+ 19 hidden pages