Operators Manual
High Pressure Washer
MODEL 1400E
IMPORTANT:
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
CUB CADET P.O. BOX 368023 CLEVELAND, OHIO 44136-9722 (www.cubcadet.com)
Model 1400 E INDEX |
NEVER! |
Never point nozzle at people or animals.
Never drink alcohol or use drugs while operating this equipment.
Never operate while standing in water.
Never touch plug with wet hands.
Never let electrical connections rest in water.
Never operate pressure washer without the water turned on
Never use hot water
Model 1400E OVERVIEW
Item Description
1.Vario Spray wand
2.Spray wand extension
3.Rotating spray wand
4.Trigger gun
5.Trigger gun safety lock
6.High pressure hose
17. Mobile adapter bracket (qty. 2)
8.Power cord & GFCI
9.Hose/cord caddy
10.Trigger gun holder
11.Detergent reservoir
12.On/Off switch
13.Detergent filter & suction tube
14.High pressure outlet
15.Water inlet
16.Package of 6 screws
(not pictured) |
8 |
|
|
17. Rotating spray wand |
|
|
|
|
|
|
|
|
|
|
15
17
Specifications
Operating pressure |
1400 PSI |
Water volume |
1.6 GPM |
Voltage |
120 V |
Amp draw |
14 AMPS |
Dealer Referral Line
1-877-835-7841
or visit our website: www.cubcadet.com
IMPORTANT PRECAUTIONS – Read First!
Safety Warnings
When using this product, basic precautions should always be followed:
•Read all the instructions before using the product.
•High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals,
electrical devices, or the machine itself.
•To reduce the risk of injury, do not operate the machine near children.
•Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls.
•Stay alert — watch what you are doing.
•Wear safety goggles.
• Do not use acids, solvents, or any
flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.
•Do not operate the product when fatigued or under the influence of alcohol or drugs.
•Do not stand on unstable surfaces. Stand with both feet balanced at all times.
•To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.
•The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position.
Extension Cords
Use a sufficient gauge: Up to 25 ft = 12/2 AWG; 25 to 50 ft = 10/2 AWG. Use only extension cords that are intended for outdoor use. These extension cords are identified by the marking “Acceptable for use with outdoor appliances; store indoors while not in use.” Use only extension cords having an electrical rating not less than the rating of the product. Do not use damaged extension cords. Examine extension cord before using and replace if damaged. Do not abuse extension cord and do not yank on any cord to disconnect. Keep cord away from
heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord. If you are using an extension cord, it should always be completely unwound from the cable drum.
Ground Fault Circuit Interrupter (GFCI) Protection
This unit is supplied with a portable Ground Fault Circuit Interrupter (GFCI). UL indicates that the power cord has been investigated for compliance with the applicable provisions of UL 943, Third Edition (Standard for Ground Fault Circuit Interrupters) and other applicable standards. If power is interrupted in the line, the GFCI will automatically reclose the circuit to the load after power is restored. Depending on the GFCI model, it may be necessary to manually operate the reset button to restore power to the GFCI load circuit.
This Product Is |
2 |
Double Insulated
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding method is provided on a double-insulated product, nor should a method for grounding be added to the product. Servicing a doubleinsulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace.
A double-insulated product is marked with the words, “DOUBLE INSULATED.”
Caution
•Follow the maintenance instructions specified in the manual.
•This machine has been designed for use with cleaning detergents supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.
IMPORTANT PRECAUTIONS – continued |
OPERATING INSTRUCTIONS |
• The water supply temperature must not exceed 104°F/40°C.
• Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.
• Always prevent debris from being drawn into the unit by using a clean water source.
ASSEMBLY INSTRUCTIONS
3
Step 1 Attach one adapter bracket to pressure washer by aligning holes on adapter bracket with posts on the pressure washer as shown. Tighten the two screws.
Step 2 Place detergent reservoir between adapter brackets as shown. Attach second adapter bracket.
Step 3 Attach handle onto top of adapter brackets. Press down to lock.
Tighten with screws as shown. Step 4 Slide the spray wand extension Note: Hose/cord caddy and trigger into the gun. Turn the wand collar onto the gun gun holder must be on opposite sides. threads until tight.
the high pressure hose to |
Step 2 Insert the spray wand of |
outlet. |
your choice into the wand extension. |
|
Press in against the spring tension and |
|
twist into the locked position. |
4
garden hose |
garden hose |
|
source and turn |
6 Turn on the pressure
(I). The motor starts only if trigger of the gun is pulled shuts off when the trigger is
released.