Cooper Lighting Neo-Ray 201-IP, Neo-Ray 201-D-I, Neo-Ray SHELL II User Manual

0 (0)
NEO-RAY
SUSPENDED
2-1/2"
[63mm]
S
10-3/4" [275mm]
T8 = 1, 2, 3 Lamp T5 = 2, 3, 4 Lamp
Construction: Housing is one-piece, die-formed, cold rolled steel, forming a 10-3/4” x 2-1/2” curved architectural profile. Perforated sections are 33% open with staggered hole pattern and opal diffuser. Standard 4’-0”, 8’-0” and 12’-0” luminaire lengths combine for continuous runs.
End Caps: End caps are precision die-cast aluminum mechanically attached without exposed fasteners.
Reflectors: Center reflector is die-formed, highly specular aluminum.
Electrical: Luminaires are prewired with quick wire connectors and use UL list Class P, T5HO or T8 program rapid start universal voltage electronic ballasts. Power factor of 97% with less than 10% THD. Fixtures and electrical components certified to UL and CUL standards.
Finish: Luminaire housings are standard white using electrostatically applied acrylic powder coat paint.
Mounting: Standard mounting includes dual aircraft cable and mounts directly to all ceiling types. Row mounted fixtures are continuous with hairline joints unless Articulated Joint option is specified. Mounts on fixtures with Articulated Joint option will not align with grids.
= Slim Line Ballast only.
S
Ordering Information:
Sample number: 201-IP-SP-1T5HO-1C-277-DC48-T1-48
Series
201-IP=Shell II 201-DI=Shell D/I
Optics Up
S=Specular
Optics Down
P=Perforated (IP) H=RPerformance ™ Louver (DI)
Number of Lamps (not included)
1=1 Lamp (T5HO) 3=3 Lamps (T5HO, T8) 2=2 Lamps(T5HO, T8) 4=4 Lamps (T8)
Lamp Type (Length)
T5HO=54W (4’ Unit) T8=32W (4’ Unit)
Number of Circuits
1=1 Circuit 2=2 Circuits (*Standard 2 circuit option will switch
1
Wiring
C=Standard Circuit B=Battery Pack D=Dimming E=Emergency/Nightlight T=Nightlight
*Slim line ballast only (small case)
1
Voltage
1=120V 2=277V 3=347V U=Universal
Suspension
D=Dual Cable P=Rigid Pendant 4(single stem)
Power Feed
C=Straight Cord P=Rigid Pendant K=Curly Cord
Suspension Length
-Adjustable Cable 48”, 120”, 240”, 300” or 360” (infinite adjustment along entire cable)
-Rigid Pendant 212”, 15”, 18”, 21”, 24” or 27”
Ceiling Type
T1=1” T-Bar ST=Structure TS=Slotted T-Bar T9=9/16” T-Bar JB=4” Octagonal J-Box
Run Length (Specify luminaire length in feet)
-Individually Mounted Luminaires may be 4’, 8’ or 12’ in length.
-Continuously Mounted Standard row configurations over 12’ consist of 8’ and 12’ sections.
3
Joining
AJ=Articulated Joining Luminaire sections may be joined with an
optional aluminum coupler, which visually separates sections. Refer to back page for mounting details.
1 Due to various constraints, some options may not be combined with others. 2 Consult factory for custom rigid pendant lengths. 3 Articulated Joining option will not align with grids. 4 Available with 7° or earthquake 45° swivel canopy assembly.
1
Inboard lamps together. Out board lamps will be on circuit two.)
1
SHELL II
201-IP
201-D/I
SEMI-INDIRECT (IP)
• Die formed steel perforated modular housing lengths – 4’, 8’ and 12’ (201-IP only).
• Optional articulated joiners [not suitable for precise incremental mounting centers]
• Dual aircraft cable hangers for superior leveling.
• Incremental mounting on the ceiling grid - 4’, 8’ and 12’ (201-IP only) centers.
• Wide number of T5 and T8 lamping options.
• Precision die cast end caps.
201-D/I features
• RPerformance TM parabolic semi specular louver for RP­1 compliance.
• Die formed modular housing lengths – 4’ and 8’
• Incremental mounting on the ceiling grid - 4’ and 8’ centers.
STANDARD LUMINAIRE LENGTHS*
8’ 8’
NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
END CAP B
10-3/4" [275mm]
2-1/2" [63mm]
1-1/4" [32mm]
1-1/4"
AJ - Articulated Joining
Optional aluminum coupler
COOPER LIGHTING
717
Loading...