Neo-Ray 501IW
2-1/4"
S
6-3/4" [171mm]
8-1/8" [206mm]
[57mm]
Construction
20-gauge steel housing with staggered round hole
pattern backed by white acrylic diffuser. Nominal 4’
or 8’ illuminated sections.
End Caps
Precision die-cast aluminum.
Reflector
Formed semi-specular anodized aluminum.
Electrical
120, 277, 347 or Universal Voltage electronic ballast.
Fixtures and electrical components certified to UL
and CUL standards.
Finish
Baked on low gloss white powder coated acrylic.
Mounting
Wall mounted.
ORDERING INFORMATION:
Sample number: 501IW-2T5-20-1EB-SI-RP
Series
501=Viceroy
Light Output
I=Indirect
Mounting
W=Wall
Number of Lamps (not included)
1=1 Lamp 2=2 Lamps
Lamp Type
T5 T5HO
Run Length
Overall Nominal Run Length__ft.
1
Voltage
1=120V 2=277V 3=347V U=Universal
Ballast
EB=Electronic Ballast (Standard) DB=Dimming Ballast
[Only slim line ballast (small case)]
Switching
SI=Single Switching DU=Dual Switching (2 Lamps)
Perforation
RP=Round BP=None SP=Slotted
Emergency
EM=Emergency Pack (Consult Factory)
Fusing
GLR GMF
1 Due to various constraints, some options may not be combined with others.
NEO-RAY
VICEORY
501-IW
DIRECT-INDIRECT
• Semi-indirect light
distribution.
• Minimalist fixture profile –
6.75" wide by 2.25" high.
• Optimized T5 optics for wide
light distribution and good
efficiency.
• Die formed perforated steel
housing.
• Modular lengths – 4' and 8'
for individual or continuous
runs.
• Precision die cast end caps.
™
WALL
= Slim Line Ballast only.
S
STANDARD LUMINAIRE LENGTHS
MODULAR ROW CONFIGURATION
• Standard length sections join easily to create rows.
• Sections align with T-grid.
• All sections prewired for through-wiring with quick connectors.
END CAP
1-3/4"
NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
COOPER LIGHTING
735
Loading...