COOPER LIGHTING - METALUX®
STRIPS AND INDUSTRIALS ACCESSORIES (ORDER SEPARATELY)
A C C E S S O R Y |
D E S I G N AT I O N |
D E S C R I P T I O N |
Gripper Hanger |
GRP-SS-U |
For mounting on T-bar grid. Use two per fixture. |
|
(Use with SS, IA/IC) |
Can also be stem mounted or bolted to surface |
|
|
using 11/16" hole provided. Fixture spacing 1- |
|
|
1/2". |
|
GRP-STN-U |
|
|
(Use with STN, STM, IA/IC-HO) |
|
ACCESSORIES
Tong Hanger |
ATG-4-U |
Heavy Gauge Channel Tong Hanger. |
|
(Use with IA/IC-HO,STN, STM, DI, |
Use two per fixture. Fixture spacing 1 1/2”. |
|
DIM, DIVM, EI, EIM, EIVM) |
|
|
ATG-5-U |
|
|
(Use with STW) |
|
Spacer |
A-1-B/Spacer-U |
Spaces fixture 1 1/2" to 2 1/2" from ceiling |
|
(Use with all Strips and Industrials) |
|
Suspension Sets |
|
|
Stem Sets |
SCF-XX-B |
Fixed Stem Set |
|
SCS-XX-B |
Swivel Stem Set |
|
(Deep canopy, 3/8" stem, 5/8" |
|
|
outside diameter) |
|
|
XX= Length 6, 8, 12, 24, 36, 48, 60, 72 |
|
SCF SCS SCA |
SCA-48-B |
Adjustable Stem Set (1/4" IPS Stem, 1/2" O.D.) |
|
|
Used with all surface fixtures as stem sets. SCS stems have 45° swivel, one direction. One set consists of one stem assembly. Minimum of two sets required per fixture. NOTE: Coupler, 3/8" IPS Pipe Coupler to join lengths. Coupler is standard baked white enamel or special order of black.
27")
CCA CCA CCA PFC PFS NPF
Cable Sets |
CCA-XX-PFC-U |
CCA=Adjustable Cable (XX=48" or 120") |
|
CCA-XX-PFS-U |
CCF=Fixed Cable (XX=12", 15", 18", 21", 24" or |
|
CCA-XX-NPF-U |
PFC=Power Feed, coil power cord |
|
CCF-XX-PFC |
PFS=Power Feed, straight power cord |
|
CCF-XX-PFS |
NPF=Non Power Feed |
|
CCF-XX-NPF |
|
Chain Hanger |
AYC-Chain/Set-U |
Sturdy wire hook and 36" chain set. |
|
(Use with all strips and industrials |
Use two per fixture. One set of two provided |
|
except SN and STW) |
|
|
Eye-Chain/ Set-B |
Eye bolt and 36" chain. |
|
(SN only) |
Use two per fixture. One set of two provided |
|
VT2-Chain/ Set-U |
Eye bolt and 36" chain. |
|
(VT2 only) |
|
Channel Connector |
CLC-B |
Special rigid channel connector designed to give |
|
|
extra support to continuous channel installation |
|
|
(Use with SS, IA/IC). Provision for hanging |
|
|
device. (LA City Approved) |
DI Long Connector |
DI2 Long Connector |
Extra support heavy duty channel connector. |
|
(Use with STN, STM, DI, DIM, DIVM, |
|
|
EI, EIM, EIVM, IA/IC-HO) |
|
Items listed are the major accessories available on Metalux Recessed (Parabolic and Recessed) and Surface Fixtures. Additional |
|
|
options and accessories are available. |
COOPER LIGHTING |
471 |
Consult Pre-Sales Technical Support for additional information. |
Loading...