Clarion Advanced Technology Corporation 20 Empire Drive, Lake Forest, CA 92630-2244 - USA
RGBNTSC
CONVERTER
DEALER
INSTALLATION
The RGBNTSC converter is used when a composite (NTSC) screen is to be used for large screen Navigation applications.
This unit should be mounted under the dash or somewhere near the front screen. To hook up the converter, connect the RGB cable from the back of the main unit and the other end to the converter. Use the RCA cables provided with the monitor and connect one end to the monitor and the other end to the converter. Now hook up the ACC power and ground as shown in the schematic below.
The unit has ACC, power and ground that must be connected. The yellow power wire must be connected to 12V main power, red is connected to ACC, and the black ground wire must be connected to a ground connection.
Monitor
RCA Cable
Power Cable
Part # YX-X01-M009
Red
RGB Cable |
Black |
|
Yellow
RCA Cable
to Monitor
RGB Cable
Part # YX-X01-M008
RGB Cable
Loading...