Loading...
MOBILE THERMAL PRINTER
MODEL CMP-20 series
User’s Manual
En
Ge
Fr
Sp
It
Du
Da
Por
Pol
WEEE MARK
If you want to dispose of this product, do not mix it with general household waste. There is a separate collection systems for used electronics products in accordance with legislation under the WEEE Directive (Directive 2002/96/ EC) and is effective only within European Union.
Wenn Sie dieses Produkt entsorgen wollen, dann tun Sie dies bitte nicht zusammen mit dem Haushaltsmüll. Es gibt im Rahmen der WEEE-Direktive innerhalb der Europäischen Union (Direktive 2002/96/EC) gesetzliche Bestimmungen für separate Sammelsysteme für gebrauchte elektronische Geräte und Produkte.
Si vous souhaitez vous débarrasser de cet appareil, ne le mettez pas à la poubelle avec vos ordures ménagères. Il existe un système de récupération distinct pour les vieux appareils électroniques conformément à la législation WEEE sur le recyclage des déchets des équipements électriques et électroniques (Directive 2002/96/EC) qui est uniquement valable dans les pays de l’Union européenne.
Les appareils et les machines électriques et électroniques contiennent souvent des matières dangereuses pour l’homme et l’environnement si vous les utilisez et vous vous en débarrassez de façon inappropriée.
Si desea deshacerse de este producto, no lo mezcle con residuos domésticos de carácter general. Existe un sistema de recogida selectiva de aparatos electrónicos usados, según establece la legislación prevista por la Directiva 2002/96/CE sobre residuos de aparatos eléctricos y electrónicos (RAEE), vigente únicamente en la Unión Europea.
Se desiderate gettare via questo prodotto, non mescolatelo ai rifiuti generici di casa. Esiste un sistema di raccolta separato per i prodotti elettronici
usati in conformità alla legislazione RAEE (Direttiva 2002/96/CE), valida solo all’interno dell’Unione Europea.
Deponeer dit product niet bij het gewone huishoudelijk afval wanneer u het wilt verwijderen. Er bestaat ingevolge de WEEE-richtlijn (Richtlijn 2002/96/ EG) een speciaal wettelijk voorgeschreven verzamelsysteem voor gebruikte elektronische producten, welk alleen geldt binnen de Europese Unie.
Hvis du vil skille dig af med dette produkt, må du ikke smide det ud sammen med dit almindelige husholdningsaffald. Der findes et separat indsamlingssystem for udtjente elektroniske produkter i overensstemmelse med lovgivningen under WEEE-direktivet (direktiv 2002/96/EC), som kun er gældende i den Europæiske Union.
Se quiser deitar fora este produto, não o misture com o lixo comum. De acordo com a legislação que decorre da Directiva REEE – Resíduos de Equipamentos Eléctricos e Electrónicos (2002/96/CE), existe um sistema de recolha separado para os equipamentos electrónicos fora de
uso, em vigor apenas na União Europeia.
Jeżeli zamierzasz pozbyć się tego produktu, nie wyrzucaj go razem ze zwykłymi domowymi odpadkami. Według dyrektywy WEEE (Dyrektywa 2002/96/EC) obowiązującej w Unii Europejskiej dla używanych produktów elektronicznych należy stosować oddzielne sposoby utylizacji.
2
Declaration of Conformity
This printer conforms to the following Standards:
The Low Voltage Directive 2006/95/EC, the EC/R&TTE Directive, the RoHS Directive 2002/95/EC, and the WEEE Directive 2002/96/EC.
LVD : |
EN60950-1 |
|
EC/R&TTE: |
EN55022 |
Class B |
EN301 |
489-1 |
EN301 |
489-17 |
EN300 328
EN55024
FCC Compliance Statement for American Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and receiver.
•• Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
•• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Use shielded cables to connect this device to computers.
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
EMI Compliance Statement for Canadian Users
•• This Class B digital apparatus complies with Canadian ICES-003.
•• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
3
GENERAL PRECAUTIONS
•• Before using this product, be sure to read through this manual. After having read this manual, keep it in a safe, readily accessible place for future reference.
•• The information contained herein is subject to change without prior notice.
•• Reproduction or transfer of part or all of this document in any means is prohibited without permission from CITIZEN SYSTEMS.
•• Note that CITIZEN SYSTEMS is not responsible for any operation results regardless of missing, error, or misprinting in this manual.
•• Note that CITIZEN SYSTEMS is not responsible for any trouble caused as a result of using options or consumables that are not specified in this manual.
•• Except explained elsewhere in this manual, do not attempt to service, disassemble or repair this product.
•• Note that CITIZEN SYSTEMS is not responsible for any damage attributable to incorrect operation/handling or improper operating environments which are not specified in this manual.
•• Due to the nature of thermal paper, printed data should be considered for temporary use, not stored for a long period or permanently. Please note that CITIZEN SYSTEMS is not responsible for damage or lost profit resulting from the loss of data caused by accidents, repairs, tests or other occurrence.
•• If you find loss of information, error, or uncertain matter, please contact your CITIZEN SYSTEMS dealer.
•• If you find any disordered or missing page (s), contact you CITIZEN SYSTEMS dealer for replacement.
CITIZEN is a registered trade mark of Citizen Holdings Co., Japan CITIZEN es una marca registrada de Citizen Holdings Co., Japón Company names and product names in this manual are trademarks or registered trademarks of relevant companies.
Copyright © 2010 by CITIZEN SYSTEMS JAPAN CO., LTD.
4
SAFETY PRECAUTIONS
What the Icons Mean
Precautions and notices necessary to follow for preventing hazards to the user or other person or their properties are defined as shown below. Hazards and degrees of damage that may be caused by ignoring the instructions are categorized as shown below. Please be familiar with the content of these definitions before reading this manual.
Danger Indicates the case that may result in death or serious injury.
This symbol indicates that using the Warning product improperly in defiance of this symbol may result in death or serious
injury.
This symbol indicates that using the Caution product improperly in defiance of this symbol may result in injury or damage
to properties.
Definition of the icons
This symbol indicates the hazard that needs precautions.
This symbol indicates prohibited actions.
This symbol indicates mandatory actions.
5
Precautions in Handling Printer
WARNING
zz If the product continues to be used when heat or smoke is generated or an abnormal odor is produced, a fire may occur. Immediately turn the printer power off, and carefully but quickly remove the battery, then contact our service agent.
zz If any foreign matter (metal tip, water, liquid) enters the product, immediately turn the printer power OFF, and carefully but quickly remove the battery, then contact our service agent. Ignoring this instruction may result in a fire.
CAUTION
zz Do not place the printer on a shaky table or other unbalanced place. The printer may drop or fall resulting in injury.
zz Avoid using or storing in the following place. Damage to printer may be caused.
•• In a car parked in a sunny place, a place exposed to direct sunlight, near heat generating equipment, or the like.
•• A place where temperature or humidity is excessively high or low, or its change is radical.
•• A dusty place.
•• A place likely to get a splash of water or liquid.
zz Avoid dropping, impacting or vibrating the printer otherwise damage may be caused.
zz Avoid entry of foreign material. Otherwise, fault may occur. zz Do not use volatile liquid (thinner, benzine, etc.) or wet cloth
when cleaning the printer. Deterioration or discoloration may occur. Use a dry, soft cloth for cleaning.
zz Do not move the printer or give any shock or vibration to it while the printer is in operation or in standby operation. The printer power may be disconnected and the print data may be lost.
6
Precautions on Using Printer
WARNING
zz Do not touch the print head or paper cutter while replacing print paper. Heated print head may cause burn. The cutter may cause injury to the hand.
CAUTION
zz Use of print paper other than specified may result in not only deteriorated print quality but shortened life of print head (printing portion).
zz Do not tap or rub the print head with edged or hard material. zz When condensation is present on the print head, dry it
completely before printing. Printing with condensation may damage the print head.
Precaution on Overheating
CAUTION
zz To prevent the motor from overheating, continuous printing (or feeding) of the printer should be 1.5 m or less in print length. After printing for this distance we recommend a pause of at least 30 seconds for cooling.
7
Precautions on Using Battery
DANGER
zz Leaked liquid from the battery may result in loss of eyesight if it enters the eye. Immediately wash eyes with fresh water and get medical care.
zz If liquid from the battery is ingested, immediately seek medical attention.
zz Keep the following in mind when handling battery. Otherwise, liquid leakage, heat generation, and explosion may result.
•• Do not throw battery into fire or do not apply heat.
•• Do not peel or scratch the external battery casing.
•• Soldering is prohibited.
•• Do not give strong shock to battery or throw it away.
•• Do not short-circuit the positive and negative terminals with a metal such as metal wire.
zz Never disassemble or modify battery. Otherwise, liquid leakage, heat generation, or explosion may occur.
WARNING
zz If battery liquid attaches to skin or cloth, immediately wash it out with fresh water. Otherwise, skin disorder may be caused.
CAUTION
zz Risk of explosion if battery is replaced by an incorrect type. zz Dispose of used batteries according to the instructions.
zz Use only the approved external charger or charge the battery within the printer.
zz Never use another charger or one that looks to be similar.
8
CAUTION
zz Do not dip battery in water or sea water. Wet battery may generate heat or may be subject to corrosion.
zz Do not use or leave battery at high temperature. Using or leaving battery in a place of high temperature may result in liquid leakage, deteriorated performance, or shortened lifetime.
zz Keep battery beyond the reach of a baby or child. Pay attention not to let a child take out the battery.
zz If the battery is used for the first time, be sure to charge it completely before use.
zz If any abnormality is found while the battery is in use, stop the operation and carry the battery in local sales agent.
zz The battery in the printer is shipped partially charged. Please fully charge the battery prior to using the printer.
Precautions on Installing New Paper
CAUTION
zz Before printing, confirm that print paper is set straight forward at the exit from the print (thermal) head. Skewed setting may result in paper jamming.
zz To prevent skewed insertion of paper, use the following form for the end of paper.
OK |
NG |
NG |
NG |
|
|
|
|
9
Precautions on Using Thermal Paper
CAUTION
zz Print density may change with different kinds of paper.
zz Observe the following when using thermal paper. Thermal paper is not resistant to discoloration, deterioration in quality, and thin printing.
•• Do not leave printed thermal paper exposed to light for a long time.
•• Avoid exposure to high temperature, humidity, liquid, or sunlight.
•• When keeping the printer thermal paper on a board, do not use paste, adhesive, or adhesive tape containing volatile organic solvent.
•• For long-time storage, use thermal paper of high storage type or copy it with plain paper copier.
•• Avoid contact with a film of vinyl chloride for a long time.
•• Avoid using ammonia. Do not put thermal paper near the paper copied by use of ammonia.
•• Avoid putting sweat or grease from your hands on the surface (printed or to be printed) of thermal paper.
•• Store thermal paper in a dark place with average temperature below 25°C and relative humidity below 65% .
zz Using print paper with a thickness outside the recommended range may cause improper print quality.
10
Loading...