Cisco Systems OL-6030-01 User Manual

0 (0)
Cisco Systems OL-6030-01 User Manual

C H A P T E R 2

Installing Cisco MeetingPlace for

Cisco IP Phone Release 4.2.5

This chapter includes the following sections:

Information About Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5, page 2-1

Prerequisites for Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5, page 2-1

How to Install Cisco MeetingPlace for Cisco IP Phone Release 4.2.5, page 2-2

Information About Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5

For information about incorporating Release 4.2.5 into your Cisco MeetingPlace system or for system requirements, see the Release Notes for Cisco MeetingPlace for IP Phone at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/ipphone/425/index.htm

Prerequisites for Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5

One primary IP address for communication with the Cisco MeetingPlace Audio Server and Cisco CallManager server.

Note If Cisco MeetingPlace IP Gateway and Cisco MeetingPlace Web Conferencing are installed on the same server, you must assign an additional IP address to Cisco MeetingPlace

Web Conferencing, resulting in two IP addresses.

Before you install Release 4.2.5, you must install Cisco MeetingPlace Web Conferencing and configure Cisco CallManager for your network.

If you are using Cisco MeetingPlace IP Gateway, see the Cisco MeetingPlace IP Gateway System Manager’s Guide for additional configuration instructions.

System Manager’s Guide for Cisco MeetingPlace for Cisco IP Phone Release 4.2.5

 

OL-6030-01

2-1

 

 

 

Chapter 2 Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5

How to Install Cisco MeetingPlace for Cisco IP Phone Release 4.2.5

Release 4.2.5 requires anonymous authentication. If Cisco MeetingPlace Web Conferencing is set up to use web authentication, Release 4.2.5 must be installed on a separate server with a dedicated Cisco MeetingPlace Web Conferencing server installed.

If you use a hostname, domain name system (DNS) must be enabled to resolve the hostname to an IP address.

Each user must be associated with a Cisco IP phone. For additional information, see the Cisco CallManager Administration documentation for your release.

If you are running other Cisco MeetingPlace gateways that use the MeetingPlace Agent Service, we recommend that you stop this service prior to installing Release 4.2.5.

How to Install Cisco MeetingPlace for Cisco IP Phone Release 4.2.5

To install Release 4.2.5, perform the following procedures in the order shown:

Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5, page 2-2

Configuring the Cisco MeetingPlace Service in Cisco CallManager, page 2-3

Prerequisites

Verify the path of your Cisco MeetingPlace Web Conferencing installation.

Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5

To install Release 4.2.5, perform the following steps:

Step 1 To obtain Release 4.2.5, go to http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml.

Step 2 Enter your Cisco.com User Name and Password and click OK.

Step 3 Under the Cisco MeetingPlace product heading, click MeetingPlace IP Phone.

Step 4 Download the Cisco MeetingPlace IP Phone Integration Release 4.2.5 zip file.

Step 5 If your Cisco MeetingPlace Web Conferencing release is installed in <drive>:\Program Files\Cisco Systems\MPWeb, install Release 4.2.5 by unzipping the files from the Cisco MeetingPlace IP Phone Integration zip file to this directory.

or

If yourCisco MeetingPlace Web Conferencing release is installed in <drive>:\latitude\mpweb directory, install Release 4.2.5 by unzipping the files from the Cisco MeetingPlace IP Phone Integration zip file to this directory.

This installation is a full install and contains only scripts and templates.

System Manager’s Guide for Cisco MeetingPlace for Cisco IP Phone Release 4.2.5

2-2

OL-6030-01

 

 

Loading...
+ 4 hidden pages