Cisco Systems EXPLORER 4550HDC User Manual

Size:
1.11 Mb
Download

Notice to Installers

The servicing instructions in this notice are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualified to do so.

Note to System Installer

For this apparatus, the coaxial cable shield/screen shall be grounded as close as practical to the point of entry of the cable into the building.For products sold in the US and Canada, this reminder is provided to call the system installer's attention to Article 820-93and Article820-100of the NEC (or Canadian Electrical Code Part 1), which provides guidelines for proper grounding of the coaxial cable shield.

This symbol is intended to alert you that uninsulated voltage within this product may have sufficient magnitude to cause electric shock.Therefore, it is dangerous to make any kind of contact with any inside part of this product.

Ce symbole a pour but d’alerter toute personne qu’un contact avec une pièce interne de ce produit, sous tension et non isolée, pourrait être suffisant pour provoquer un choc électrique. Il est donc dangereux d’être en contact avec toute pièce interne de ce produit.

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceableparts inside. Refer servicing to qualified service personnel.

WARNING

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This symbol is intended to alert you of the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.

Ce symbole a pour but de vous avertir qu’une documentation importante sur le fonctionnement et l’entretien accompagne ce produit.

20070131 SysInstaller 820 US/Canada/Intl

IMPORTANT SAFETY INSTRUCTIONS

Read These Instructions

Keep These Instructions Heed All Warnings Follow All Instructions

Power Source Warning

A label on this product indicates the correct power source for this product. Operate this product only from an electrical outlet with the voltage and frequency indicated on the product label. If you are uncertain of the type of power supply to your home or business, consult your service provider or your local power company.

The AC inlet on the unit must remain accessible and operable at all times.

Ground the Product

WARNING: Avoid electric shock and fire hazard! Do not defeat the safety purpose of the polarized orgrounding-typeplug. A polarized plug has two blades with one wider than the other. Agrounding-typeplug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

If this product connects to coaxial cable wiring, be sure the cable system is grounded (earthed). Grounding provides some protection against voltage surges and built-upstatic charges.

Outdoor Grounding System

If this product connects to an outdoor antenna or cable system, be sure the antenna or cable system is grounded (earthed). This provides some protection against voltage surges and built-upstatic charges.

Article 810 of the National Electric Code (NEC) ANSI/NFPA No. 70-1990,provides the following information:

Grounding of the mast and supporting structure

Grounding the lead-inwire to an antenna discharge unit

Size of the grounding conductors

Location of the antenna-dischargeunit

Connection to grounding electrodes

Requirements for the grounding electrodes (see the following antenna grounding diagram as recommended by NEC ANSI/NFPA 70)

WARNING: Avoid electric shock and fire hazard! Do not locate an outside antenna system in the vicinity of overhead power lines or power circuits. Touching power lines or circuits might be fatal.

Verify the Power Source from the On/Off Power Light

When the on/off power light is not illuminated, the apparatus may still be connected to the power source. The light goes out when the apparatus is turned off, regardless of whether it is still plugged into an AC power source.

Eliminate AC Mains Overloads

WARNING: Avoid electric shock and fire hazard! Do not overload AC mains, outlets, extension cords, or integral convenience receptacles. For products that require battery power or other power sources to operate them, refer to the operating instructions for those products.

Prevent Power Cord Damage

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where the cord exits from the apparatus.

Provide Ventilation and Select a Location

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not place this apparatus on a bed, sofa, rug, or similar surface.

Do not place this apparatus on an unstable surface.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation provides proper ventilation.

Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or other objects on top of this product.

Protect from Exposure to Moisture and Foreign Objects

Do not use this apparatus near water.

WARNING:Avoid electric shock and fire hazard! Do not expose this product to liquids, rain, or moisture.

WARNING: Avoid electric shock and fire hazard! Unplug this product before cleaning. Clean only with a dry cloth. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean this product.

WARNING: Avoid electric shock and fire hazard! Never push objects through the openings in this product. Foreign objects can cause electrical shorts that can result in electric shock or fire.

Accessories Warnings

Protect the Product from Lightning

For added protection, unplug this apparatus during lightning storms or when unused for long periods of time. In addition to disconnecting the AC power from the wall outlet, disconnect the signal inputs.

WARNING: Avoid electric shock and fire hazard! Only use attachments/accessories specified by your service provider or the manufacturer.

Service Warnings

WARNING: Avoid electric shock! Do not open the cover of this product. Opening or removing the cover may expose you to dangerous voltages. If you open the cover, your warranty will be void. This product contains nouser-serviceableparts. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as a power-supplycord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Check Product Safety

Upon completion of any service or repairs to this product, the service technician must perform safety checks to determine that this product is in proper operating condition.

Quick Reference Guide

Cisco Explorer 4540HDC and 4550HDC Set-TopwithMulti-StreamCableCARD Interface

Explorer 4550HDC

CH+

VOL-

VOL+

SELECT

POWER

CH-

GUIDE INFO EXIT SETTINGS

Protect the Product when Moving It

Always disconnect the power source when moving the apparatus or connecting or disconnecting cables.

WARNING: Avoid personal injury and damage to this product! Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury fromtip-over.

20070802 Set-TopCable US & Canada

United States FCC Compliance

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the cable company or an experienced radio/television technician for help.

Any changes or modifications not expressly approved by Scientific-Atlanta,Inc., could void the user’s authority to operate the equipment.

The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is intended to supply you with information regarding the FCC approval of this device. The phone numbers listed are for FCC-related questions only and not intended for questions regarding the connection or operation for this device. Please contact your cable service provider for any questions you may have regarding the operation or installation of this device.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1) the device may not cause harmful interference, and 2) the device must accept any interference received, including interference that may cause undesired operation.

Explorer 4540HDC and 4550HDC Models: 4540HDC and 4550HDC Manufactured by: Scientific-Atlanta,Inc. 5030 Sugarloaf Parkway Lawrenceville, Georgia 30044 USA Telephone:770-236-1077

Canada EMI Regulation

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la class B est conforme à la norme NMB-003du Canada.

20060628 FCC Standard

Disclaimer

Cisco Systems, Inc. assumes no responsibility for errors or omissions that may appear in this guide. We reserve the right to change this guide at any time without notice.

AVC VIDEO LICENSE

With respect to each AVC/MPEG-4/H.264product, we are obligated to provide the following notice:

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONALAND NON-COMMERCIALACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM.

Accordingly, please be advised that service providers, content providers, and broadcasters are required to obtain a separate use license from MPEG LA prior to any use of AVC/MPEG-4/H.264encoders and/or decoders.

 

Scientific Atlanta, A Cisco Company

770.236.5000

 

5030 Sugarloaf Parkway, Box 465447

 

 

 

 

Lawrenceville, GA 30042

www.scientificatlanta.com

 

Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, Scientific Atlanta, and Explorer are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.

CableCARD and M-Cardare trademarks of Cable Television Laboratories, Inc.

HDMI, the HDMI logo, and High-DefinitionMultimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

All other trademarks mentioned in this document are the property of their respective owners.

Product and service availability is subject to change without notice. © 2007, 2008 Cisco Systems, Inc. All rights reserved.

March 2008

Printed in United States of America

Part Number 4012225 Rev B

Welcome

The Cisco Explorer 4540HDC (digital-onlytuning) and 4550HDC (analog and digital tuning)set-topsdeliverhigh-definitionprogramming with exceptional picture and audio quality. Through the 4540HDC and 4550HDC you can also access interactive services, such asvideo-on-demand andpay-per-viewprograms. Contact your service provider for information about these and other available services. Use the instructions in this guide to install the 4540HDC or the 4550HDC and to access your program services.

The consumer support website provides news and information about this product. For more information, please refer to www.scientificatlanta.com/products/consumers/new_cableboxes.htm

Safety First

Before using this set-top,read the IMPORTANT SAFETY INSTRUCTIONS section of this guide.

Watch TV

Press the following remote control keys to access services and programs:

Guide–Displaytheon-screenprogram guide

Arrows–Highlighta program in the schedule

Info–Displayprogram description

Select–Watcha specific program in the guide

Avoid Screen Burn-In

Images such as letterbox bars or side bars, bright closed-captioningbackgrounds, station logos, or any other stationary images may cause the HDTV screen to age unevenly and cause damage to your HDTV. Refer to the user’s guide that came with your HDTV for more information about screenburn-in.

Front Panel Features

 

CH+

Explorer 4550HDC

Note: This illustration

 

 

may vary from the

VOL-

VOL+

 

 

SELECT

POWER

actual product.

 

 

 

 

CH-

 

 

 

GUIDE INFO

EXIT SETTINGS

 

T13035

1

2

3

4

5

6

7

8

9

10

11

1

VOL +, VOL -

 

Increases and decreases the volume

 

 

 

2

CH+, CH -

 

Scrolls up and down through the channels

 

 

 

3

Select

 

Provides access to your on-screenselection

 

 

4

LED Display

 

Displays the selected channel number and time of day. The LED also displays the following:

Message ( )

HDTV

Power ( )

Output Resolution (1080i, 720p, 480p, or 480i)

AUTO - Automatically outputs native scan rates that your TV can accept

5

Guide

Accesses on-screenservices, such as theon-screenguide,video-on-demand,orpay-per-view

6

Info

Displays a description of the selected program. This button is available from the on-screenguide and

 

 

while viewing a program

 

7

Exit

Exits menus, the on-screenguide, and program information

Safety and Performance Tips

8

Settings

Provides access to the Settings menu

• Keep the top of the set-topfree of

9

IR Sensor

Receives the infrared signal from the remote control

all objects and electronic devices,

10 Power

Turns the set-topon and off

including your TV.

11

USB Port

Connects to external equipment, such as a keyboard or mouse

• Always set the set-topon its feet,

 

 

(reserved for future use)

never on its side.

 

 

 

 

 

 

 

Automatic Software Updates

A message appears on the TV screen when the set-topand theMulti-StreamCableCARDTM (M-CardTM)module are receiving software updates. In addition, download information also appears on the front panel of theset-topduring these updates. Wait for the current time to display on the front panel before continuing. When the time appears, the update is complete.

Performance Tips

If the set-topdoes not perform as expected, the following tips may help.

No picture

Verify that the M-Cardmodule is installed.

Verify that the power to your TV is turned on.

If the set-topis plugged into a wall switch, verify the switch is in the ON position. (Avoid plugging into an outlet that is controlled by a wall switch.)

Verify that all cables are properly connected.

The current channel may not be available in your service package. Try selecting another channel to see if a picture appears.

No color

Verify that the HDTV is in HD mode. If necessary, re-runthe HDTV Setup Wizard to select HD mode.

Verify the current TV program is broadcast in color.

Adjust the TV color controls.

No sound

If your setup includes a VCR or stereo, verify that you have properly connected them to the set-top.

Verify the volume is turned up.

Verify the mute function is not on.

Back Panel Connections

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTICAL

 

 

CAUTION

 

 

 

Pr

L

AUDIO OUT

AUDIO OUT

 

 

RISK OF ELECTRIC SHOCK

 

 

 

 

 

 

 

 

DO NOT OPEN

MULTI-STREAM

 

 

 

 

 

 

 

 

 

AVIS: RISQUE DE CHOC

CABLE CARD

 

 

 

 

 

 

 

 

 

ELECTRIQUE NE PAS OUVRIR

 

 

 

 

 

 

 

Scientific-Atlanta,Inc.

 

120 VAC

 

THIS DEVICE IS INTENDED TO BE ATTACHED TO A RECEIVER

Pb

R

 

 

CATV CONVERTER

ETHERNET

 

60Hz 3.4 A

 

THAT IS NOT USED TO RECEIVE OVER-THE-AIRBROADCAST SIGNALS.

 

 

 

 

MADE IN MEXICO

 

 

M-CARDSN: PKCPTMFDV

CONNECTION OF THIS DEVICE IN ANY OTHER FASHION MAY CAUSE

 

 

 

 

IR

 

 

 

 

HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS AND IS IN

 

 

 

 

 

 

 

 

 

VIOLATION OF THE FCC RULES, PART 15.

 

 

 

 

 

 

 

 

 

M-CARDMAC: 001BD746C7CB

 

 

Y

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1394

 

 

 

 

 

 

 

 

 

 

120 VAC

 

 

 

 

 

 

 

 

 

 

60Hz 40W

 

CABLE

CABLE

HDTV

 

DIGITAL

VIDEO

S-VIDEO

USB

1394

 

 

 

AUDIO OUT

OUT

OUT

 

 

IN

OUT

 

 

 

 

 

 

 

 

Note: This illustration may vary from the actual product.

T13036

1

2

3

4

5

6

7 8

9 1011 12 13 14

15

16

1

Multi-Stream

Slot for M-Cardmodule, which decrypts subscription digital channels. Thisset-topwill not operate correctly without

 

CableCARD

an M-Cardmodule. Obtain anM-Cardmodule from your service provider

 

2

Cable In

 

Connects to a coaxial cable that delivers the signal from your service provider

3

Cable Out

 

Connects to a coaxial cable that sends analog audio and video signals to a TV or VCR.

 

 

 

These signals are standard-definitionTV (SDTV) video and stereo audio

 

4

Audio Out

 

Connects to RCA cables that send analog audio signals (left and right) to the stereo inputs on a TV

 

(Left, Right)

 

 

 

 

 

 

 

 

 

5HDTV (PrPbY/V) Connects to the component video input (YPbPr) on the HDTV, when in HD mode

6Digital Audio Out Connects to an RCA cable that sends a digital audio signal to asurround-soundreceiver or other digital audio device

7Out 2 (Secondary Connects to either a VCR or to another set of inputs (composite) on your TV

Video/Audio Out)

8

IR

Connector reserved for future use

9

S-VideoOut

Connects to an S-Videocable that sends anS-Videosignal to your TV or VCR.

 

 

This signal is standard definition, but higher quality than other SDTV connections

10

Optical Audio

Connects to an optical cable that sends a digital audio signal to a surround-soundreceiver or other digital audio device

 

Output

 

11

HDMI

Connects an HDMITM cable to the HDMI input of an HDTV. HDMI supports both digital audio and video.

 

 

May be used to connect to a DVI interface using an HDMI-to-DVIadaptor for video and separate audio connections.

 

 

Any of the following audio connections may be used: Audio Out: Left, Right (4); Digital Audio Out (6); or Optical Audio

 

 

Output (10)

12

Ethernet

Connects to an Ethernet network

13

USB

Connects to external USB devices such as a keyboard or a mouse

14

1394 Firewire

Connects to display devices that are equipped with a 1394 input

15

AC Power Input

Connects to the power cord to deliver power to the set-top

16

AC Outlet

Connects to the AC power cord from another device, such as a TV

Connecting to an HDTV with Component Input (YPbPr)

Use the connection diagram and follow these steps to connect the set-topto an HDTV that has a component video connector (YPbPr) and an audio left/right connector.

1.Insert the M-Cardmodule if not already installed.

2.Connect the set-topto the coaxial cable coming from the wall.

3.Connect the Y (green) connector on the HDTV to the Y (green) connector on the set-top;connect the Pb (blue) connector on the HDTV to the Pb (blue) connector on theset-top;and connect the Pr (red) connector on the HDTV to the Pr (red) connector on theset-top.

4.Connect the left audio (white) connector on the HDTV to the left audio (white) connector on the set-top,and connect the right audio (red) connector on the HDTV to the right audio (red) connector on theset-top.

5.Plug the set-topand the HDTV into an AC power source.

Important: To potentially protect theset-topfrom power surge damage, ground (earth) your cable product to provide some protection against voltage surges andbuilt-upstatic charges. You may be able to reduce the risk of damage from voltage surges, which can be caused by lightning storms and power outages, by plugging theset-topinto a surge protector.

6.Wait several minutes for the set-topto receive the latest software, programming, and service information. When you see one of the following displays on the front panel of theset-top,that indicates that the update is complete:

• Current time

• Four dashes (----)

Note: If four dashes are displayed, you must call your service provider to get theset-topauthorized.

7. To begin watching TV, turn on the HDTV and press Power on the front panel of the set-top,or press Power on the remote control.

Explorer 4540HDC and 4550HDC

 

 

 

 

 

OPTICALOPTICAL

 

CAUTION

 

 

PrPr

LL

AUDIOAUDIOOUTOUT

AUDIOAUDIOOUTOUT

 

RISKRISKOFOFELECTRICELECTRICSHOCKSHOCK

 

 

 

 

 

DODONOTNOTOPENOPEN

MULTIMULTI--STREAMSTREAM

 

 

 

 

 

 

AVIS:AVIS: RISQUERISQUEDEDECHOCCHOC

CABLECABLECARDCARD

 

 

 

 

 

 

ELECTRIQUEELECTRIQUE NENE PASPASOUVRIROUVRIR

 

 

 

 

 

 

 

 

 

PbPb

RR

 

ScientificScientific--Atlanta,Atlanta,IncInc..

112020 VAVACC

 

THISTHISDEVICEDEVICEISISINTENDEDINTENDEDTOTOBEBEATTACHEDATTACHEDTOTOAARECEIVERRECEIVER

 

CATVCATVCONVERTERCONVERTER

ETHERNETETHERNET

60Hz60Hz 33..44 AA

 

THATTHATISISNOTNOTUSEDUSEDTOTORECEIVERECEIVEOVEROVER--THETHE--AIRAIRBROADCASTBROADCASTSIGNALSSIGNALS..

 

 

 

MADEMADEININMEXICOMEXICO

 

 

CONNECTIONCONNECTIONOFOFTHISTHISDEVICEDEVICEININANYANYOTHEROTHERFASHIONFASHIONMAYMAYCAUSECAUSE

 

 

 

IRIR

 

 

M-CARDSN: PKCPTMFDV

HARMFULHARMFULINTERFERENCEINTERFERENCETOTORADIORADIOCOMMUNICATIONSCOMMUNICATIONSANDANDISISININ

 

 

 

 

 

VIOLATIONVIOLATIONOFOFTHETHEFCCFCCRULES,RULES,PARTPART1515..

 

 

 

 

 

 

M-CARDMAC: 001BD746C7CB

 

YY

 

 

 

11394394

 

 

 

 

 

 

 

112020 VAVACC

 

 

 

 

 

 

 

60Hz60Hz40W40W

CABLECABLE

CABLECABLE

HDTVHDTV

DIGITALDIGITALVIDEOVIDEO

SS--VIDEOVIDEO

USBUSB

13941394

 

AUDIOAUDIOOUTOUT

OUTOUT

OUTOUT

ININ

OUTOUT

 

 

 

 

 

 

Cable Input

WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to theset-top.

 

 

 

 

 

AUDIO IN

 

 

S-VIDEO

 

 

 

DVI/HDCP

 

 

 

 

 

R

L

 

 

 

 

 

 

 

 

 

 

 

 

 

ANT (75

)

 

VIDEO

Y

 

VIDEO

Y

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L/

 

ANT-1

 

 

L/

PB

L

MONO

PB

L

 

 

MONO

 

 

 

 

 

 

 

AUDIO

PR

AUDIO

R

PR

AUDIO

 

 

 

 

 

 

 

OUT

 

 

R

 

R

 

 

R

 

Back of

 

 

 

 

 

 

HD 1

 

 

HD 2

ANT-2

 

IN

IN

 

OUT

IN

 

HDTV

 

 

 

 

 

 

 

 

T13037

 

 

 

 

 

 

U.S. Patents

A patent notice is affixed to this product. In addition, the product may also be covered by one or more of the following patents:

4,498,169; 4,692,919; 4,748,667; 4,829,569; 4,866,770; 4,885,775; 4,888,799; 4,890,319; 4,922,456; 4,922,532; 4,924,498; 4,965,534; 4,991,011; 5,003,384; 5,012,510; 5,029,207; 5,045,816; 5,053,883; 5,054,071; 5,058,160; 5,142,575; 5,142,690; 5,146,526; 5,155,590; 5,214,390; 5,225,902; 5,225,925; 5,235,619; 5,237,610; 5,239,540; 5,241,610; 5,247,364; 5,255,086; 5,257,403; 5,267,071; 5,270,809; 5,271,041; 5,272,752; 5,282,028; 5,285,497; 5,287,351; 5,301,028; 5,309,514; 5,317,391; 5,319,709; 5,341,425; 5,347,388; 5,347,389; 5,357,276; 5,359,601; 5,361,156; 5,367,571; 5,379,141; 5,379,145; 5,381,481; 5,390,337; 5,400,401; 5,406,558; 5,418,782; 5,420,866; 5,420,923; 5,425,101; 5,428,404; 5,430,568; 5,434,610; 5,436,749; 5,438,370; 5,440,632; 5,442,472; 5,455,570; 5,457,701; 5,471,492; 5,477,199; 5,477,262; 5,477,282; 5,477,370; 5,481,389; 5,481,542; 5,485,221; 5,493,339; 5,497,187; 5,500,758; 5,502,499; 5,506,904; 5,519,780; 5,539,822; 5,550,825; 5,579,055; 5,579,057; 5,583,562; 5,592,551; 5,596,606; 5,600,378; 5,602,933; 5,640,388; 5,657,414; 5,675,575; 5,684,876; 5,715,515; 5,724,525; 5,734,822; 5,740,300; 5,742,677; 5,754,940; 5,757,416; 5,771,064; 5,774,859; 5,825,829; 5,826,167; 5,850,305; 5,854,703; 5,870,474; 5,892,607; 5,920,626; 5,923,755; 5,930,024; 5,930,515; 5,937,067; 5,963,352; 5,966,163; 5,982,424; 5,991,139; 5,999,207; 6,005,631; 6,005,938; 6,016,163; 6,028,941; 6,029,046; 6,052,384; 6,055,244; 6,072,532; 6,105,134; 6,148,039; 6,157,719; 6,188,729; 6,195,389; 6,212,278; 6,215,530; 6,219,358; 6,240,103; 6,243,145; 6,246,767; 6,252,964; 6,272,226; 6,292,081; 6,292,568; 6,320,131; 6,374,275; 6,405,239; 6,411,602; 6,417,949; 6,424,714; 6,424,717; 6,433,906; 6,438,139; 6,463,586; 6,467,091; 6,476,878; 6,493,876; 6,510,519; 6,516,002; 6,516,412; 6,526,508; 6,538,595; 6,546,013; 6,560,340; 6,567,118; 6,570,888; 6,622,308; 6,629,227; 6,664,984; 6,667,994; 6,671,879; 6,674,967; 6,678,891; 6,714,598; 6,721,352; 6,721,956; 6,725,459; 6,738,982; 6,744,892; 6,744,967; 6,751,271; 6,760,918; 6,795,972; 6,802,077; 6,804,708; 6,811,447; 6,817,028; 6,822,972; 6,823,385; 6,832,386; 6,845,106; 6,868,473; 6,874,075; 6,889,191; 6,909,471; 6,917,622; 6,917,628; 6,922,412; 6,927,806; 6,928,656; 6,931,058; 6,937,729; 6,969,279; 6,971,008; 6,971,121; 6,978,310; 6,986,156; 6,988,900; 6,996,838; 7,010,801; 7,053,960; 7,065,213; 7,069,578; 7,069572; D348065; D354959; D359737; D363932; D390217; D434753; D507240; D507535; D513407; D516518; RE36368; RE36988

20070417 Patents