Cisco Systems CPMICWIREDS User Manual
Size:
3.94 Mb
Download

User Options web pages

Line settings on web

Change phone display language

Procedure

Step 1 Sign in to your User Options web page.

Step 2 Select User Options> Device.

Step 3 Select an item from the User Localedrop-downlist.

Step 4 SelectSave.

Line settings on web

Line settings include call forward, voice message indicators, ring types, and line text labels that you set up for your conference station.

Note By default, the ring type and line text label options do not display on your User Options web pages. Contact your system administrator to set up these options so that you can access them.

This section describes the line settings you can update from your User Options web pages.

Related Topics

Sign in and out of User Options web pages, on page 65

Call Forward, on page 42

Preferences, on page 22

Set up Call Forward per line

Procedure

Step 1 On your User Options web page, selectUser Options >Device.

Step 2 Select a phone from the Namedrop-downmenu.

Step 3 Select Line Settings.

Step 4 If you have more than one directory number (line) assigned to your phone, select a line from the Linedrop-downmenu.

Step 5 In the Incoming Call Forwarding area, select call forwarding settings for various conditions.

Step 6 SelectSave.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0

74

User Options web pages

Line settings on web

Change voice message indicator setting per line

Procedure

Step 1 On your User Options web page, selectUser Options >Device.

Step 2 Select a phone from theName drop-downmenu.

Step 3 Select Line Settings.

Step 4 (Optional) If you have more than one directory number (line) assigned to your phone, select a line from the Linedrop-downmenu.

Step 5 In the Message Waiting Lamp area, choose from various settings.

Typically, the default message waiting setting prompts your phone to display a steady red light from the handset light strip to indicate a new voice message.

Step 6 SelectSave.

Change audible voice message indicator setting per line

Procedure

Step 1 On your User Options web page, selectUser Options >Device.

Step 2 Select a phone from theName drop-downmenu.

Step 3 SelectLine Settings.

Step 4 If you have more than one directory number (line) assigned to your phone, select a line from the Linedrop-downmenu.

Step 5 In the Audible Message Waiting Lamp area, choose from various settings.

Step 6 SelectSave.

Change ring type

When the conference station is idle, an incoming call rings uses the idle ring setting. When the conference station is active, an incoming call rings uses the consecutive ring setting.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0

75