Cisco Systems CPMICWIREDS User Manual
Size:
3.94 Mb
Download

Calling features

Host Meet Me conference

The Meet Me conference begins when the host connects. Participants who call the conference before the host has joined hear a busy tone and must dial again.

Note The conference ends when all participants hang up; the conference does not automatically end when the host disconnects.

Host Meet Me conference

Procedure

Step 1 Obtain a Meet Me phone number from your system administrator.

Step 2 Distribute the Meet Me phone number to participants.

Step 3 When you are ready to start the meeting, pressMeetMe.

You may need to press More first.

Step 4 Dial the Meet Me phone number.

Join Meet Me Conference

Procedure

Step 1 Dial the Meet Me phone number provided by the conference host.

Step 2 If you hear a busy tone, the host has not yet joined the conference. In this case, disconnect and try your call again.

Mobile Connect

Mobile Connect allows you to use your mobile phone to handle calls associated with the conference station phone number.

To set up Mobile Connect, use the User Options web pages to set up remote destinations and create access lists to allow or block calls from specific phone numbers from being passed to the remote destinations.

When you enable Mobile Connect:

The conference station and remote destinations receive calls simultaneously.

When you answer the call on the conference station, the remote destinations stop ringing, disconnect, and display a missed call message.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0

54

Calling features

Enable Mobile Connect

When you answer the call on one remote destination, the other remote destinations and the conference station stop ringing, disconnect, and a missed call message displays on the other remote destinations.

Enable Mobile Connect

Procedure

Step 1 Press More.

Step 2 PressMobility to display the current remote destination status (Enabled or Disabled).

Step 3 PressSelect to change the status.

Step 4 Press Exit.

Switch IP phone call to mobile phone

Procedure

Step 1 Press More.

Step 2 Press Mobility.

Step 3 Select To mobile.

Step 4 Answer thein-progresscall on your mobile phone.

You cannot use the conference station for any other calls while this call is still in progress. The Call button LED lights solid red, and the calling party number displays on the phone.

Switch mobile call to IP phone

Procedure

Step 1 PressCall on the conference station.

Step 2 Hang up the call on your mobile phone to disconnect the mobile phone, but not the call.

Step 3 PressResume on the conference station within 5 to 10 seconds and start talking on the conference station.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0

55