Cisco Systems BTS 10200 User Manual
Size:
234.06 Kb
Download

New and Changed Information

C I S CO CO N F I D E N T I A L

Limitations and Restrictions

With this release, you must have secured FTP capabilities.

Note The secure FTP requirement was first implemented in Release 3.3, and has been carried over to Release 3.5.

Deactivating SS7 Links

Prior to executing the platform stop all command, Cisco recommends that you deactivate any SS7 links that are homed off of the unit. For example, if platform stop all is to be issued on the secondary side, take down the links on the secondary side first. If you are unsure which links are homed on the primary side, and which are homed on the secondary side, contact Cisco TAC for assistance. Once the maintenance is complete, reactivate the links after the Call Agent and Feature Server applications are back in service.

Transaction Queue

Ensure that the scripts used in provisioning the CA and the EMS databases are separated into pure configuration scripts, and pure control/equip scripts. Otherwise, the databases may lose synchronization. If loss of synchronization occurs, the transaction-queuemay become stuck, and not clear out.

New and Changed Information

This section lists the new features and enhancements available in Release 3.5.

New Features in Release 3.5

The Cisco BTS 10200 BTS Softswitch has three new features in Release 3.5. They include:

Small platform feature

ISDN PRI Variant feature

CALEA feature

Auto Recovery of Hung CICs

New OAMP Features

Alarms

The following sections briefly describe these features, and how they enhance Release 3.5. For more detailed information on each of the features described here, including how to provision them, refer to the relevant Cisco BTS 10200 Softswitch Feature Modules or manuals.

Cisco BTS 10200 Softswitch Release Notes for Release 3.5 V02

4

OL-3965-01