Cisco Systems BTS 10200 User Manual
Size:
234.06 Kb
Download

System Requirements

C I S CO CO N F I D E N T I A L

System Requirements

The Cisco BTS 10200 Softswitch consists of the following equipment:

Call Agent/Feature Server (CA/FS)—Twoapplication servers, each with four CPUs.

Element Management System/bulk Data Management System (EMS/BDMS) server— Two administration processors, each with one CPU.

Two switch routers.

Power distribution unit (PDU) for DC systems.

DC-poweredsystems require two (redundant) feeds of 40A at-48VDC.AC-poweredsystems require two (redundant) circuits of 20A at 120 VAC.

Note DC systems require two redundant feeds. Cisco highly recommends uninteruptable power for both AC and DC.

The physical requirements for installation of the Cisco BTS 10200 Softswitch are documented in the

Cisco BTS 10200 Softswitch Building Environment and Power Site Survey.

You can order the Cisco BTS 10200 Softswitch as software only, or as part of an entire Cisco Systems solution.

Software Only Purchase

When ordering the software-onlysolution, you will work with the Cisco BTS 10200 Softswitch product manager to determine the correct software load. The base software load includes licenses for 5,000 subscribers/DS0 licenses and 10 CPS.

If you need additional RTU and CPS, you’ll need to order multiple RTU (in increments of 1K subs) and CPS licenses as appropriate.

Note Cisco TAC does not support hardware when purchased directly from Sun or another vendor. Hardware support contracts should be purchased from Sun, or their Sun Value Added Reseller.

The Sun hardware listed in can be ordered directly from the vendor. TAC will only approve the following hardware configurations.

Ordering the Hardware and Software Solution from Cisco

Hardware available from Cisco for North American Customers is listed above as the CCPU configuration. Determine if you need AC or DC, and if you want the hardware in a cabinet or ready to mount in a customer rack. Work with a BTS 10200 product manager to determine the appropriate load for your customer. This base software includes 5000 subscriber/DS0 licenses and 10 CPS.

You’ll need to order RTU and CPS licenses as appropriate if additional subscribers are needed.

For more detailed information, refer to the Cisco BTS 10200 Softswitch System Description.

Cisco BTS 10200 Softswitch Release Notes for Release 3.5 V02

2

OL-3965-01

 

 

System Requirements

C I S CO CO N F I D E N T I A L

Component Interoperability

Table 1 lists the supported platforms for the Cisco BTS 10200 Softswitch, and the loads that were tested for each platform.

Table 1

Component Interoperability Matrix

 

 

Supported Platform

Loads Tested Against Each Gateway

 

 

Cisco IAD 2421

c2420-a2i8sv5-mz.122-11.T4

 

 

 

Cisco 3640

 

c3640-js-mz.122-11.T2

 

 

 

Cisco 3660

 

c3660-js-mz.122-11.T2

 

 

Cisco 3660 Telco

c3660-telcoent-mz.122-11.T2

 

 

Cisco MGX 8850

vism 3.1

 

 

vism_8t1e1_003.051.001.000.fw

 

 

Cognitronics CX500

M load

Announcement Server

 

 

 

Cisco AS5300

c5300-js-mz.122-11.T2

 

 

Motorola CG4501

5.4.2

 

 

Thomson DHG455

1.2C.02

 

 

Cisco Universal Broadband

ubr7200-ik8s-mz.122-11.BC2.bin

uBR7246 Router

 

 

 

Bay Packets billing server

 

 

 

 

ESR10K

 

bootflash:c10k-u2p10-mz.coriolis_ios

 

 

IP Unity (2 components, below)

 

 

Media Server

 

 

 

Application Server

 

 

 

 

Operator Access

Operator access to the Cisco BTS 10200 Softswitch is only available by secure shell (SSH) session to the EMS over Ethernet. Communications can be interactive or can be in batch mode using FTP.

Installation Notes

For detailed installation procedures for the Release 3.5 software, refer to the Cisco BTS 10200 Softswitch Application Installation Guide.

Cisco BTS 10200 Softswitch Release Notes for Release 3.5 V02

 

OL-3965-01

3