Cisco Systems 811 User Manual
Size:
744.16 Kb
Download

Quick Start Guide

Cisco 811 and 813 Router Cabling and Setup

1Cisco One-Year Limited Hardware Warranty Terms

2Overview

3Parts List

4Verify the PC Setup

5Connect the Cisco 811 or 813 Router to a PC

6Connect the Cisco 811 or 813 Router to a Hub

7Connect an ISDN Line

8Connect Telephone, Fax Machine, or Modem

9Connect the Power and Turn On the Router

10Verifying the LEDs

11Obtaining Documentation

12Documentation Feedback

13Cisco Product Security Overview

14Obtaining Technical Assistance

15Obtaining Additional Publications and Information

1 CiscoOne-YearLimited Hardware Warranty Terms

There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.

1.Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm The Warranties and License Agreements page appears.

2.To read the Cisco Information Packet, follow these steps:

a.Click the Information Packet Number field, and make sure that the part number78-5235-03A0is highlighted.

b.Select the language in which you would like to read the document.

c.Click Go.

The Cisco Limited Warranty and Software License page from the Information Packet appears.

d.Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe’s website:http://www.adobe.com

3.To read translated and localized warranty information about your product, follow these steps:

a.Enter this part number in the Warranty Document Number field: 78-10747-01C0

b.Select the language in which you would like to view the document.

c.Click Go.

The Cisco warranty page appears.

d.Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

You can also contact the Cisco service and support website for assistance:

http://www.cisco.com/public/Support_root.shtml.

Duration of Hardware Warranty

One (1) Year

Replacement, Repair, or Refund Policy for Hardware

Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

To Receive a Return Materials Authorization (RMA) Number

Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.

2

Complete the information below, and keep it for reference.

Company product purchased from

Company telephone number

Product model number

Product serial number

Maintenance contract number

2 Overview

This document describes the basic process of cabling and configuring the Internet access device, the Cisco 811 or 813 router. For advanced cabling information, refer to the Cisco 811 and 813 Router Hardware Installation Guide. For advanced configuration information, refer to theCisco 800 Series Router Software Configuration Guide. These documents are available on Cisco.com.

3 Parts List

The shipment of your Cisco 811 or 813 router includes the following items:

One Cisco 811 or 813 router

One yellow Ethernet cable

One red ISDN U cable

One blue console cable

One DB-9-to-RJ-45adapter (for use with the blue console cable)

One black power supply

One black power supply cord

Product Documentation

4 Verify the PC Setup

Before you begin, verify that each computer that will be connected to the router has a network interface card (NIC) installed and that Transmission Control Protocol/Internet Protocol (TCP/IP) has been loaded and configured. For more information on how to configure TCP/IP, refer to the PC Configuration Instructions to Establish Cisco Router-to-PC Communications, which is available on Cisco.com.

3

5 Connect the Cisco 811 or 813 Router to a PC

Follow these steps to connect the Cisco 811 or 813 router to a PC:

Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 811 router) or from any of the yellow Ethernet ports (Cisco 813 router) on the back panel of the router to the Ethernet port on the NIC on the computer.

Figure 1 Connecting a Cisco 811 or 813 Router to a PC

TO HUB TO PC

ETHERNET 10

BASE T

 

Model Cisco 813

NOR

RVS

DSU

ON

OFF

71 VDC

OK

LAN

AUX

Step 2 Verify that the TO HUB/TO PC switch on the left side of the back panel has been set to the TO PC position.

Note The TO HUB/TO PC button corresponds to the Ethernet port on the Cisco 811 router and to Ethernet port 1 on the Cisco 813 router.

Caution Always connect the yellow cable or Ethernet cable that you supply to the yellow ports on the router. Do not connect the cable to an ISDN S/T or U port or to a Network Termination 1 (NT1) device. Accidently connecting the cable to the wrong port can damage your router.

4

6 Connect the Cisco 811 or 813 Router to a Hub

Follow these steps to connect the Cisco 811 or 813 router to a hub:

Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 811 router) or from any of the yellow Ethernet ports (Cisco 813 router) on the back panel of the router to the hub.

Figure 2 Connecting a Cisco 811 or 813 Router to a Hub

TO HUB TO PC

ETHERNET 10

BASE T

 

Model Cisco 813

NOR

RVS

DSU

ON

OFF

2X

10/100

 

 

3X

 

 

4X

6X 7X 8X

MDI

MDI-X

micro hub 10/100

Step 2 Verify that the TO HUB switch on the left side of the back panel has been set to the TO HUB position.

Note The TO HUB/TO PC button corresponds to the Ethernet port on the Cisco 811 router and to Ethernet port 1 on the Cisco 813 router.

Caution Always connect the yellow cable or Ethernet cable that you supply to the yellow ports on the router. Do not connect the cable to an ISDN S/T or U port or to a Network Termination 1 (NT1) device. Accidently connecting the cable to the wrong port can damage your router.

5