Cisco Systems 805 Series User Manual
Size:
716.07 Kb
Download

Quick Start Guide

Cisco 805 Series Router Cabling and Setup

1Cisco One-Year Limited Hardware Warranty Terms

2Overview

3Parts List

4Verify the PC Setup

5Connect the Cisco 800 Series Router to a PC

6Connect the Cisco 800 Series Router to a Hub

7Connect the Cisco 805 Router to a Serial Drive

8Connect the Power and Turn On the Router

9Verifying the LEDs

10Obtaining Documentation

11Documentation Feedback

12Cisco Product Security Overview

13Obtaining Technical Assistance

14Obtaining Additional Publications and Information

1 CiscoOne-YearLimited Hardware Warranty Terms

There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.

1.Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm The Warranties and License Agreements page appears.

2.To read the Cisco Information Packet, follow these steps:

a.Click the Information Packet Number field, and make sure that the part number78-5235-03A0is highlighted.

b.Select the language in which you would like to read the document.

c.Click Go.

The Cisco Limited Warranty and Software License page from the Information Packet appears.

d.Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe’s website:http://www.adobe.com

3.To read translated and localized warranty information about your product, follow these steps:

a.Enter this part number in the Warranty Document Number field: 78-10747-01C0

b.Select the language in which you would like to view the document.

c.Click Go.

The Cisco warranty page appears.

d.Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

You can also contact the Cisco service and support website for assistance:

http://www.cisco.com/public/Support_root.shtml.

Duration of Hardware Warranty

One (1) Year

Replacement, Repair, or Refund Policy for Hardware

Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

To Receive a Return Materials Authorization (RMA) Number

Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.

2

Complete the information below, and keep it for reference.

Company product purchased from

Company telephone number

Product model number

Product serial number

Maintenance contract number

2 Overview

This document describes the basic process of cabling and configuring the Internet access device, the Cisco 805 router. For advanced cabling information, refer to the Cisco 805 Router Hardware Installation Guide. For advanced configuration information, refer to theCisco 805 Router Software Configuration Guide. These documents are available on Cisco.com.

3 Parts List

The shipment of your Cisco 800 series router includes the following items:

One Cisco 805 router

One yellow Ethernet cable

One black power supply

One black power supply cord

Product Documentation

4 Verify the PC Setup

Before you begin, verify that each computer that will be connected to the router has a network interface card (NIC) installed and that Transmission Control Protocol/Internet Protocol (TCP/IP) has been loaded and configured. For more information on how to configure TCP/IP, refer to the PC Configuration Instructions to Establish Cisco Router-to-PC Communications, which is available on Cisco.com.

3

5 Connect the Cisco 800 Series Router to a PC

Follow these steps to connect the Cisco 805 router to a PC with a 10or 10/100 Mbps network interface card (NIC):

Figure 1 Connecting a Cisco 805 Router to a PC

 

HUB

LINK

NO HUB

ETH

 

ERNET

 

CON

 

SOLE

10

BASE T

 

Cisco

805

SERIAL

Cisco 805 Router

AUX

0

OK

LAN

SER

 

 

AUX

 

 

PC

Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port on the back panel of the router to the Ethernet port on the NIC on the computer.

Step 2 Verify that the HUB/NO HUB switch on the left side of the back panel has been set to the NO HUB position (out). If the button is in, press it to set it to the out position.

4

6 Connect the Cisco 800 Series Router to a Hub

Follow these steps to connect the Cisco 805 router to a hub:

Figure 2 Connecting a Cisco 805 Router to a Hub

 

HUB

LINK

NO HUB

ETHERNET CONSOLE

Cisco

805

 

Cisco 805 Router

2X

10/100

 

 

3X

 

 

4X

6X 7X 8X

MDI

MDI-X

1528 Micro Hub 10/100

Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port on the back panel of the router to the Ethernet port on the hub.

Step 2 Verify that the HUB/NO HUB switch on the left side of the back panel has been set to the HUB position (in). If the button is out, press it to set it to the in position.

7 Connect the Cisco 805 Router to a Serial Drive

The following table describes the devices most commonly connected to the router serial port and how the serial line is used.

Serial Device

WAN Options

WAN Encapsulation (Framing)

Network Type

 

 

 

 

Asynchronous

Asynchronous

Point-to-PointProtocol (PPP)

Remote office to

modem

dial-upline

 

corporate office

 

 

 

Small office to Internet

 

 

 

service provider (ISP)

 

 

 

 

Channel service

Synchronous

Synchronous leased line:

Remote office to

unit/data service

leased line

High-LevelData Link Control

corporate office

unit (CSU/DSU)

Frame Relay

(HDLC) or PPP

Small office to ISP

 

 

 

X.25

Frame Relay

 

 

 

 

 

 

X.25

 

 

 

 

 

5

If you need help deciding which serial cable to order, see Appendix A, “Selecting a Serial Cable” in the Cisco 805 Router Hardware Installation Guide. Then order one of the serial cables described in the following table.

Mode

Signaling

Gender

Part Number

 

 

 

 

DCE

EIA/TIA-232

Female

CAB-SS-232FC

 

 

 

 

DTE

EIA/TIA-232

Male

CAB-SS-232MT

 

 

 

 

DCE

EIA/TIA-449

Female

CAB-SS-449FC

 

 

 

 

DTE

EIA/TIA-449

Male

CAB-SS-449MT

 

 

 

 

DCE

EIA/TIA-530

Female

CAB-SS-530FC

 

 

 

 

DTE

EIA/TIA-530

Male

CAB-SS-530MT

 

 

 

 

DCE

EIA/TIA-530A

Female

CAB-SS-530AFC

 

 

 

 

DTE

EIA/TIA-530A

Male

CAB-SS-530AMT

 

 

 

 

DCE

X.21

Female

CAB-SS-X21FC

 

 

 

 

DTE

X.21

Male

CAB-SS-X21MT

 

 

 

 

DCE

V.35

Female

CAB-SS-V35FC

 

 

 

 

DTE

V.35

Female

CAB-SS-V35FT

 

 

 

 

DCE

V.35

Male

CAB-SS-V35MC

 

 

 

 

DTE

V.35

Male

CAB-SS-V35MT

 

 

 

 

Figure 3 Connecting a Serial Drive to a Cisco 805 Router

 

HUB

LINK

NO HUB

ETHERNET

 

CONSOLE

10

BASE T

 

Cisco

805

SERIAL

Cisco 805 Router

Modem or

CSU/DSU

Note In some countries, a modem or CSU/DSU might not be necessary or might be provided by your WAN service provider.

Step 1 Connect the appropriate end of the serial cable to the dark blue serial port on your router.

Step 2 Connect the other end of the cable to the modem or CSU/DSU.

6