Cisco Systems 510, 565 User Manual

0 (0)

Installing the Cisco Content Engine 510 and 565

Documentation Survey

Is Cisco documentation helpful? Click here to give us your feedback.

Introduction

The Content Engine 510 and 565 (see Figure 1) are Internet content delivery devices that offer content caching, hosting, content replication, video streaming, and other content-based services. The

Content Engine is positioned on the WAN edge between your small business site or enterprise network and the Internet.

Figure 1 Content Engine 510 and 565—Front View

83284

This document explains how to install a Content Engine in an equipment rack. It also provides general instructions for installing a Content Engine on a table or workbench.

Before you begin the installation, read the Regulatory Compliance and Safety Information for the Cisco Content Networking Product Series document and the Site Preparation and Safety Guide that shipped with your chassis.

Warning Read the installation instructions before you connect the system to its power source.

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Copyright © 2003 Cisco Systems, Inc. All rights reserved.

Contents

Contents

This document contains the following sections:

If You Need More Information, page 2

Warning Definition, page 3

Description, page 7

Installation Prerequisites, page 9

Safety Guidelines, page 10

Operating Specifications, page 12

Installing a Content Engine 510 or 565 Unit, page 14

Connecting Cables, page 19

Connecting Power and Booting the System, page 19

Checking the LEDs, page 20

Accessing the ACNS Software on the Content Engine, page 22

Removing or Replacing a Content Engine, page 23

Cisco One-Year Limited Hardware Warranty Terms, page 24

Obtaining Documentation, page 25

Obtaining Technical Assistance, page 26

Obtaining Additional Publications and Information, page 27

If You Need More Information

For additional information on the Cisco Content Engine 510 and 565 hardware, refer to the following documentation:

Cisco Content Engine 510 and 565 Hardware Installation Guide

Installing Field-Replaceable Units in the Cisco Content Engine 510 and 565

For additional information on the Cisco ACNS software, refer to the following documentation:

For Cisco ACNS software Release 5.0:

Release Notes for Cisco ACNS Software, Release 5.0

Cisco ACNS Software Deployment and Configuration Guide, Release 5.0

Cisco ACNS Software Caching Configuration Guide, Release 5.0

Cisco ACNS Software Command Reference, Release 5.0

SmartFilter for Cisco Content Engine User’s Guide, Version 3.1

For Cisco ACNS software, Release 5.1:

Release Notes for Cisco ACNS Software, Release 5.1

Cisco ACNS Software Deployment and Configuration Guide, Release 5.1

Installing the Cisco Content Engine 510 and 565

2

78-14731-02

 

 

Warning Definition

Cisco ACNS Software Caching and Streaming Configuration Guide, Release 5.1

Cisco ACNS Software Command Reference, Release 5.1

For information about configuring the Websense software, go to the following web site: http://www.websense.com

For information about configuring the SmartFilter software, go to the following web site: http://www.securecomputing.com

Warning Definition

Warning IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Waarschuwing BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Installing the Cisco Content Engine 510 and 565

 

78-14731-02

3

 

 

 

Warning Definition

Attention IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

Installing the Cisco Content Engine 510 and 565

4

78-14731-02

 

 

Cisco Systems 510, 565 User Manual

Warning Definition

¡Advertencia! INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning! VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR

Installing the Cisco Content Engine 510 and 565

 

78-14731-02

5

 

 

 

Warning Definition

Installing the Cisco Content Engine 510 and 565

6

78-14731-02

 

 

Description

Description

This document describes the following Content Engine models:

Model

Product Number

 

 

Content Engine 510

CE-510A-80GB-K9

 

CE-510A-160GB-K9

 

 

Content Engine 565

CE-565A-72GB-K9

 

CE-565A-144GB-K9

 

 

The Content Engine 510 and 565 are configured for AC-input power and have a single AC-input power supply.

Your Content Engine comes with an integrated dual-port Ethernet controller. This controller provides an interface for connecting to 10-Mbps, 100-Mbps, or 1000-Mbps networks.

The Content Engine has two 10BASE-T/100BASE-TX/1000BASE-TX Ethernet ports with RJ-45 receptacles. Both Ethernet ports support autodetect speed mode and full-duplex operation, which enables simultaneous transmission and reception of data on the Ethernet LAN.

In addition, the Content Engine 565 is configured with one Ultra320 low voltage differential (LVD) Small Computer System Interface (SCSI) connector for attaching the Cisco Storage Array. The SCSI adapter card is installed in PCI slot 2.

Figure 2 calls out the locations of the slots, ports, and receptacles on the Content Engine back panel.

Installing the Cisco Content Engine 510 and 565

 

78-14731-02

7

 

 

 

Description

Figure 2

Content Engine 510 and 565 Back Panel

 

 

 

 

1

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

83108

 

 

9

8

7

6

5

4

3

1

AC power receptacle

 

 

2

PCI slot 1; Fibre Channel or MPEG A/V

 

 

 

 

 

 

decoder ports

 

 

3

Serial port

 

 

4

Ethernet 2 receptacle

5

Ethernet 1 receptacle

 

 

6

Onboard video port (not supported)

7

Mouse port (not supported)

 

 

8

Keyboard port (not supported)

9

PCI slot 2; SCSI adapter and port (CE-565

 

 

 

 

 

 

only)

 

 

 

 

 

 

 

Models can be configured with either a Fibre Channel card or an MPEG A/V decoder card. These cards are user-replaceable and are installed in Peripheral Component Interconnect (PCI) slot 1 (labeled 2 in Figure 2).

Figure 3 shows the Content Engine with a Fibre Channel card installed, and Figure 4 shows the Content Engine with an MPEG A/V decoder card installed.

Figure 3 Content Engine 510 and 565 Back Panel—Fibre Channel Card Installed

83285

Figure 4 Content Engine 510 and 565 Back Panel—MPEG A/V Decoder Card Installed

83286

Installing the Cisco Content Engine 510 and 565

8

78-14731-02

 

 

Installation Prerequisites

Installation Prerequisites

Consider the following prerequisites before installing your Content Engine.

Tools and Parts Required

A sliding rail rack-mount kit and cable management assembly are included in your shipping container accessory box. The rack-mount kit is suitable for mounting Content Engine 510 and 565 units in 19-inch (48.26-cm) 4-post equipment racks.

Note A 2-post rack-mounting option contains angle brackets for attaching the chassis to a 2-post rack.

You need the following tools for the installation:

Flat-blade screwdriver

Phillips screwdriver

Figure 5 shows the parts that you need to install the Content Engine in an equipment rack. If any parts are missing or damaged, contact your place of purchase.

Figure 5 Rack Installation Kit

7

1

2

3

4

5

6

83198

Installing the Cisco Content Engine 510 and 565

 

78-14731-02

9

 

 

 

Loading...
+ 19 hidden pages