14” CUT OFF SAW
44829
Set up And Operating Instructions
(Blade Sold Separately)
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product. Failure to do so can result in serious injury. Save this manual.
Copyright© 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
REV 07h
|
|
Specifications |
||
|
|
|
|
|
|
Motor |
|
120 V~ / 60 Hz / 1500 W / 1 Phase, 2 HP |
|
|
Speed |
|
3400 RPM |
|
|
Blade Size |
|
14” Diameter x 1” Arbor (Not Included) |
|
|
Miter Angle |
|
0-45° Right 0-30° Left |
|
|
Table Size |
|
9-3/4” x 10-1/4” |
|
|
Cutting |
|
Steel Pipe - 4” Dia. x 1/4” Wall Thickness |
|
|
Capacities |
|
Angle Iron - 3” x 3” x 1/2” Wall Thickness |
|
|
|
|
Solid Steel - 1-3/8” Dia. |
|
Vise Assembly and Spanner Wrench Included.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.Avoid working alone. If an accident happens, an assistant can bring help.
2.Keep work area clean. Cluttered areas invite injuries.
3.Observe work area conditions. Don’t expose to rain. Keep work area well lighted.
4.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
5.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.
7.Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Wear an ANSI approved face shield when producing metal filings.
8.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across electrical cables or frames.
REV 01i, 01k, 07g, 07h
SKU 44829 |
For technical questions, please call 1-800-444-3353. |
Page 2 |
9.Maintain tools with care. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician.
10.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
11.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.
12.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by
a qualified technician. Do not use the tool if any switch does not turn On and Off properly.
13.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
14.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. This tool requires use of an extension cord of 0 to 12 amps capability (up to 50 feet), with wire size rated at 14 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use (signified by “WA” on the jacket).
15.Maintenance. For your safety, maintenance should be performed regularly by a qualified technician.
16.When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.
17.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
18.WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)
19.The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
REV 08a, 08h
SKU 44829 |
For technical questions, please call 1-800-444-3353. |
Page 3 |
Loading...