Chevrolet UPLANDER 2007 User Manual

0 (0)

2007 Chevrolet Uplander Owner Manual M

Seats and Restraint Systems .......................

7

Front Seats ..............................................

9

Rear Seats .............................................

13

Safety Belts ............................................

32

Child Restraints ......................................

56

Airbag System ........................................

96

Restraint System Check .......................

114

Features and Controls ..............................

117

Keys .....................................................

119

Doors and Locks ..................................

128

Windows ...............................................

143

Theft-Deterrent Systems .......................

145

Starting and Operating Your Vehicle

..... 150

Mirrors ..................................................

165

OnStar® System ...................................

167

Universal Home Remote System ..........

169

Storage Areas ......................................

180

Instrument Panel .......................................

189

Instrument Panel Overview ...................

192

Climate Controls ...................................

217

Warning Lights, Gages, and

 

Indicators ..........................................

230

Driver Information Center (DIC) ............

249

Audio System(s) ...................................

284

Driving Your Vehicle .................................

371

Your Driving, the Road, and Your

 

Vehicle ..............................................

372

Towing .................................................

410

Service and Appearance Care ..................

423

Service .................................................

426

Fuel ......................................................

428

Checking Things Under the Hood .........

436

Bulb Replacement ................................

471

Windshield Wiper Blade Replacement

... 476

Tires .....................................................

477

Appearance Care ..................................

517

Vehicle Identification .............................

526

Electrical System ..................................

526

Capacities and Specifications ................

533

1

Maintenance Schedule ..............................

535

Customer Assistance Information .............

555

Maintenance Schedule ..........................

536

Customer Assistance and

 

 

 

Information ........................................

556

 

 

Reporting Safety Defects ......................

573

 

 

Index ..........................................................

577

2

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name UPLANDER are registered trademarks of General Motors Corporation.

This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further

notice. For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited”

for Chevrolet Motor Division whenever it appears in this manual.

This manual describes features that may be available in this model, but your vehicle may not be equipped with all of them. For example, more than one entertainment system may be offered or your vehicle may have been ordered without a front passenger or rear seats.

Keep this manual in the vehicle, so it will be there if it is ever needed when you are on the road.

If the vehicle is sold, leave this manual in the vehicle.

Canadian Owners

A French language copy of this manual can be obtained from your dealer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

Litho in U.S.A.

© 2006 General Motors Corporation. All Rights Reserved.

Part No. 15869247 A First Printing

3

How to Use This Manual

Many people read the owner manual from beginning to end when they first receive their new vehicle. If this is done, it can help you learn about the features and controls for the vehicle. Pictures and words work together in the

owner manual to explain things.

Index

A good place to quickly locate information about the vehicle is the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found.

Safety Warnings and Symbols

There are a number of safety cautions in this book. We use a box and the word CAUTION to tell about things that could hurt you if you were to ignore the warning.

{CAUTION:

These mean there is something that could hurt you or other people.

In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you do not, you or others could be hurt.

You will also find a circle with a slash through it in this book. This safety symbol means “Do Not,” “Do Not do this” or “Do Not let this happen.”

4

Vehicle Damage Warnings

Also, in this manual you will find these notices:

Notice: These mean there is something that could damage your vehicle.

A notice tells about something that can damage the vehicle. Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly. But the notice will tell what to do to help avoid the damage.

When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words.

There are also warning labels on the vehicle. They use the same words, CAUTION or NOTICE.

Vehicle Symbols

The vehicle has components and labels that use symbols instead of text. Symbols are shown along with the text describing the operation or information relating to a specific component, control, message, gage, or indicator.

If you need help figuring out a specific name of a component, gage, or indicator, reference the following topics:

Seats and Restraint Systems in Section 1

Features and Controls in Section 2

Instrument Panel Overview in Section 3

Climate Controls in Section 3

Warning Lights, Gages, and Indicators in Section 3

Audio System(s) in Section 3

Engine Compartment Overview in Section 5

5

Chevrolet UPLANDER 2007 User Manual

These are some examples of symbols that may be found on the vehicle:

6

Section 1 Seats and Restraint Systems

Front Seats .....................................................

9

Manual Seats ................................................

9

Power Seats ...............................................

10

Heated Seats ..............................................

10

Reclining Seatbacks ....................................

11

Head Restraints ..........................................

13

Rear Seats ....................................................

13

Rear Seat Operation ...................................

13

Bucket Seats ...............................................

13

Captain Chairs ............................................

22

Third Row Seat ...........................................

27

Safety Belts ..................................................

32

Safety Belts: They Are for Everyone ...........

32

Questions and Answers About Safety

 

Belts ........................................................

36

How to Wear Safety Belts Properly .............

37

Driver Position .............................................

38

Shoulder Belt Height Adjustment .................

47

Safety Belt Use During Pregnancy ..............

48

Right Front Passenger Position ...................

48

Rear Seat Passengers ................................

48

Rear Safety Belt Comfort Guides ................

52

Safety Belt Pretensioners ............................

55

Safety Belt Extender ...................................

55

Child Restraints ............................................

56

Older Children .............................................

56

Infants and Young Children .........................

59

Child Restraint Systems ..............................

63

Where to Put the Restraint ..........................

68

Lower Anchors and Tethers for

 

Children (LATCH) ....................................

70

Securing a Child Restraint in a Rear

 

Seat Position ...........................................

77

Securing a Child Restraint in the Right

 

Front Seat Position ..................................

80

Built-In Child Restraint .................................

85

Airbag System ..............................................

96

Where Are the Airbags? ..............................

99

When Should an Airbag Inflate? ................

101

What Makes an Airbag Inflate? .................

103

How Does an Airbag Restrain? .................

104

7

Section 1

Seats and Restraint Systems

 

 

 

 

 

What Will You See After an Airbag

 

Restraint System Check .............................

114

Inflates? .................................................

 

104

Checking the Restraint Systems ................

114

Passenger Sensing System .......................

 

106

Replacing Restraint System Parts

 

Servicing Your Airbag-Equipped Vehicle ....

112

After a Crash .........................................

115

Adding Equipment to Your

 

 

 

 

Airbag-Equipped Vehicle ........................

 

113

 

 

8

Front Seats

Manual Seats

Use the lever located on the front of the seat to adjust the seat

forward or rearward. Pull up on the lever to unlock the seat.

Slide the seat to where you want it and release the lever.

{CAUTION:

You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving.

To make sure the seat is locked into place, try to move the seat back and forth with your body.

9

Power Seats

If the vehicle has power seats, the controls used to operate them are located on the outboard side of the seats.

To adjust the seat, do any of the following:

Move the seat forward or rearward by sliding the control forward or rearward.

Raise or lower the front part of the seat cushion by moving the front of the control up or down.

Raise or lower the rear part of the seat cushion by moving the rear of the control up or down.

Heated Seats

Your vehicle may have this feature. If it does, the heated seat buttons are located on the climate control panel.

This feature will heat the lower cushions of the driver’s and front passenger’s seats.

Press this button once to turn the heated seat on to the high setting.

Driver’s Side Button shown, Passenger’s Side similar

Both indicator lights next to the heated seat symbol will be lit to indicate that it is on the high setting. Press the button a second time to go to the low setting. One indicator will be lit. Press the button a third time to turn the heated seat off.

This feature will turn off automatically when the ignition is turned off.

10

Reclining Seatbacks

{CAUTION:

You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving.

{CAUTION:

If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.

Your seats have manual reclining seatbacks. The lever used to operate them is located on the outboard side of the seats.

1.Lift the recline lever.

2.Move the seatback to the desired position, then release the lever to lock the seatback in place.

3.Push and pull on the seatback to make sure it is locked.

11

To return the seatback to an upright position, do the following:

1.Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position.

2.Push and pull on the seatback to make sure it is locked.

{CAUTION:

Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this.

The shoulder belt cannot do its job because it will not be against your body. Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries.

The lap belt cannot do its job either. In a crash, the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries.

For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear your safety belt properly.

Do not have a seatback reclined if your vehicle is moving.

12

Head Restraints

Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. This position reduces the chance of a neck injury in a crash.

The height of the head restraints can be adjusted on the first and second row seats. Pull the

head restraint up or push it down to adjust it.

The head restraints on the third row seat cannot be adjusted.

Rear Seats

Rear Seat Operation

The rear seats in your vehicle have levers and straps used to adjust, remove, and reinstall the seats. By using the levers and straps in the correct order, you can easily remove the seats

from the vehicle. If your vehicle has second row captain chairs with airbags, the seats cannot

be removed.

When reinstalling the seats, make sure the seats are in the proper positions.

If your vehicle has a second row center console, it can be removed. See Second Row Center Console on page 183. Do not put a seat in the center position because the safety belt cannot be worn properly in this position. See Safety Belts: They Are for Everyone on page 32.

Bucket Seats

Your vehicle may have bucket seats in the second row. These seats can be adjusted several different ways.

13

Fold and Tumble Feature

{CAUTION:

Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position. Push and pull on the seat to make sure it is locked into place.

The second row bucket seats can be folded and tumbled forward. Use this feature for exiting and entering third row seats, if the vehicle

has them.

1.Make sure the adjustable head restraints are in the fully lowered position.

Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle

the safety belts and return them to their normal stowed position before folding a rear seat.

2. Fold the seatback flat on the seat.

You can do this by either pulling on the nylon strap, located on the rear right hand side

of the seat, or by lifting the recline lever, located on the front right hand side of the seatback.

3. Slide the seat all the way back in this position.

14

4. Release the rear set of seat hooks from the floor pins by pulling the

nylon strap, located at the base of

the seat. Use the strap to guide the seat forward.

To return the seat to the original position, do the following:

1.Align the seat so that the rear hooks on the seat are over the rear floor pins. Push down firmly on the rear of the seat so that the rear hooks attach to the rear floor pins.

2.Try to raise the seat to check that it is locked to the floor.

3.Pull the nylon strap, located on the rear right hand side of the seat, or lift the recline lever, located on the front right hand side of the seatback, to raise the seatback to the upright position.

{CAUTION:

If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.

4.Push and pull on the seatback to check that it is locked.

One of the bucket seats may be equipped with a built-in child restraint. See Built-In Child Restraint on page 85.

15

Adjusting the Bucket Seats Forward

and Rearward

There are two adjustment levers on the second row bucket seats that enable them to move forward or rearward.

One is located below the front of the seat.

The other lever is located on the rear of the seat.

To adjust the second row bucket seats forward or rearward, do the following:

1.Lift up either lever and slide the seat forward or rearward.

2.Release the lever when the seat is in the desired position.

3.Push and pull on the seat to make sure it is locked.

16

Folding or Reclining the Seatbacks

The seatback on a bucket seat can either

be folded forward or reclined using the nylon strap or the recline lever.

Nylon Strap

Recline Lever

To fold the seatback forward, do the following:

1.Pull the nylon strap, located on the rear right hand side of the seat, or lift the recline lever, located on the front right hand side of the seatback to release the seatback.

Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle

the safety belts and return them to their normal stowed position before folding a rear seat.

2. Fold the seatback forward.

{CAUTION:

If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.

To raise the seatback to the upright position from a reclined position, do the following:

1.Pull the nylon strap or lift the recline lever while raising the seatback until it locks to the upright position.

2.Push and pull on the seatback to check that it is locked.

17

To recline the seatback, do the following:

1.Pull the nylon strap or lift the recline lever.

2.Press back on the seatback until it is in the desired position

3.Let go of the strap or lever.

Removing the Bucket Seats

To remove the bucket seats, do the following:

1.Make sure the head restraint is in the fully lowered position.

Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle

the safety belts and return them to their normal stowed position before folding a rear seat.

2.Fold the seatback flat on the seat, by either pulling on the nylon strap, located on the rear right hand side of the seat, or by lifting the recline lever, located on the front right

hand side of the seatback.

3.Lift either one of the adjuster levers and slide the seat to the most rearward position. See “Adjusting the Bucket Seats Forward and Rearward” earlier in this section.

4.Release the rear set of hooks from the floor pins by pulling the nylon strap, located at the base of the seat. Use the strap to guide

the seat forward.

18

5.To release the front seat hooks from the floor pins, squeeze the angled bar, located beneath the seat toward the straight crossbar.

6.Remove the seat by rocking it slightly forward, then toward the rear of the vehicle while pulling it out. This should be done in

one motion.

Reinstalling the Bucket Seats

{CAUTION:

A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After installing the seat, always check to be sure that the safety belts are properly routed and attached, and are not twisted.

Do not install the seat facing the rear of the vehicle, as it will not lock into place. If more storage room is needed behind the seat, slide the seat forward.

Make sure the seat is in the full rear position before beginning this procedure.

19

To reinstall the bucket seats, do the following:

1.With the seat folded, squeeze the angled bar beneath the seat toward the straight crossbar, while placing the front hooks of the seat

into the front two floor pins.

2.Make sure the seat is angled so that the front seat hooks clear the floor pins. If the front hooks are not attached correctly, the seat’s rear hooks will

not attach to the rear set of floor pins.

If the front hooks are not attaching correctly, check that the seat is in the full rear position.

3.Firmly push the rear seat hooks into the rear floor pins by pushing down the rear of

the seat.

20

{CAUTION:

A seat that is not locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it.

4.Check that the seat is locked by trying to raise the seat.

5.Pull the nylon strap, located on the rear right hand side of the seat, or lift the recline lever, located on the front right hand side of the seatback, to raise the seatback to the upright position.

{CAUTION:

If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.

6.Push and pull on the seatback to make sure that it is locked.

21

Captain Chairs

Your vehicle may have second row captain chairs. If so, they can be adjusted forward or rearward and the seatbacks can be adjusted.

Adjusting the Captain Chairs Forward

and Rearward

There are two manual adjustment bars on each seat. One is located under the front of the

seat cushion. The other one is located under the rear of the seat cushion.

Lift up either bar to slide the seat forward or rearward. Release the lever. Push and pull on the seat to make sure it is locked into place.

Folding or Reclining the Seatbacks

{CAUTION:

If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.

22

To recline the seatback, lift up on the recliner lever located on the outboard side of the seat, then move the seatback to the desired position.

To raise the seatback, lift up on the recliner lever without applying pressure to the seatback.

Push and pull on the seatback to make sure it is locked in place.

Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle

the safety belts and return them to their normal stowed position before folding a rear seat.

To fold the seatback forward, lift up fully on the recliner lever. Push the seatback forward until it is flat.

The armrests can be lowered or raised for easier entry or exit of the vehicle. If your vehicle has captain chairs with side impact airbags, they will have one armrest on the inboard side.

23

Removing a Captain Chair (without a

Side Impact Airbag)

If your vehicle has captain chairs with side impact airbags, the seats cannot be removed. See

Where Are the Airbags? on page 99 for more information.

To remove a captain chair, do the following:

1.Pull the nylon strap behind the seat to release the rear hooks from the floor pins.

2.The seat can then be lifted off the front floor pins and removed from the vehicle.

24

Installing a Captain Chair (without a

Side Impact Airbag)

{CAUTION:

A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After installing the seat, always check to be sure that the safety belts are properly routed and attached, and are not twisted.

Do not put the seats in so they face rearward because they will not latch that way. For the second row, if you want more storage room behind the seat, adjust the seat by sliding it forward.

Make sure the seatbacks are in the upright position, the seat belts are on the correct side of the seats and the seats are in the full rear position before beginning this procedure.

To install a captain chair, do the following:

1.Hook the front latches over the front floor pins.

25

2.Push the rear of the seat down to lock the rear latches onto the rear set of floor pins.

{CAUTION:

A seat that is not locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it.

3.Push and pull on the seat to be sure it is properly attached.

26

Third Row Seat

Your vehicle may have a third row seat. It is a full bench seat and may come with the convenience center. See Convenience Center on page 186

for more information. The third row seat can be removed and replaced, or with the seatback folded, it will lie flat with the convenience center.

Folding the Seatback(s)

Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle

the safety belts and return them to their normal stowed position before folding a rear seat.

To fold down either side of the 50/50 split bench seat, lift the lever located on the back of the seat you want to fold, and push the seatback down.

27

Returning the Seatback to an Upright Position

{CAUTION:

If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.

To raise the seatback, do the following:

1.Move the second row seat completely forward by using the manual adjustment bar under either the front or rear of the seat cushion.

2.Open the liftgate.

3.From the rear of the vehicle, locate the pullstrap attached to the lever on the back of the seat and pull it to raise the seat.

4.Push and pull on the seatback to make sure that it is locked into place.

28

Removing the Third Row Seat

1.Remove the convenience center, if equipped. See Convenience Center on page 186 for more information.

2.Make sure all items are off the seat.

Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle

the safety belts and return them to their normal stowed position before folding a rear seat.

3.Put the seatback in its folded position before removing the seat. See “Folding the Seatback(s)” earlier in this section.

4.From behind the seat, squeeze the release handle until the pin indicators are fully out. This indicates that the rear latches are released from the floor. For ease of removing the seat, squeeze the handle with the palm of your hand up.

5.Lift the seat slightly from the floor to ensure the latches are clear of the floor pins.

6.Pull the seat rearward and out of the vehicle. The release handle can be used to carry

the seat.

29

Installing the Third Row Seat

{CAUTION:

A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After installing the seat, always check to be sure that the safety belts are properly routed and attached, and are not twisted.

Do not put the third row seat in so it faces rearward because it will not latch that way. The seat needs to be installed before the convenience center. See Convenience Center on page 186

for more information.

Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle

the safety belts and return them to their normal stowed position before folding a rear seat.

For ease of installing the seat, put the seat in the folded position before beginning this procedure.

1.From the rear of the vehicle, place the

front hooks of the seat onto the front floor pins in the third row. To do this, the seat will

need to be angled approximately 8-10 inches (20-25 cm) from the floor so the front

hooks clear the rear floor pins and rear floor cups. Use the release handle to guide the seat into place.

If the front hooks are not attached correctly, the rear latches will not attach to the rear set of floor pins.

30

Loading...
+ 562 hidden pages