Casio 2327 User Manual
Size:
135.54 Kb
Download

USER’S GUIDE 2327

General Guide

Press C to change from mode to mode.

In any mode (except when making any settings), press L to illuminate the digital display for about two seconds.

Calendar Mode

Timekeeping Mode

Calendar Mode

To set the date

Hold down B.

 

 

Press B.

 

 

 

Year

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Month

 

 

 

 

 

 

 

 

 

 

 

Day

 

 

 

 

 

Press B.

 

Press B.

 

 

 

Month

 

 

 

Day of week

 

 

Day

1.In the Calendar Mode, hold down B for about two seconds, until “ADJ” and then the year digits flash on the display. KeepB depressed until the year digits flash.

2.While any setting is selected (flashing), press C to increase it. Holding downC changes the flashing setting at high speed.

3.Press B to move the selection around the display in the above sequence.

The day of the week is automatically set in accordance with the date.

The date can be set with the range of January 1,1995 to December 31, 2039.

If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Calendar Mode automatically.

Timekeeping Mode

The minutes hand advances 1/3 of a minute each time the seconds count in the digital display reaches 00, 20 and 40 seconds.

To set the digital time

Hold down B.

Press B.

Seconds

Hour

Press B.

 

12/24

 

 

Minutes

Press B.

Press B.

 

 

 

Hour

Seconds

PM indicator

Minutes

1.In the Timekeeping Mode, hold down B for about two seconds, until “ADJ” and then the seconds digits flash on the display. KeepB depressed until the seconds digits flash.

2.While the seconds digits are selected (flashing), press C to reset the seconds to 00. If you pressC while the seconds count is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of 00 to 29, the minutes count is unchanged.

3.Press B to move the selection around the display in the above sequence.

4.While hour or minutes are selected (flashing), press C to increase the setting. Holding downC changes the current setting at high speed. While the12/24-hoursetting is selected, pressC to switch between the two formats.

If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Timekeeping Mode automatically.

Hand setting

Each press of A advances the hands 20 seconds. Holding downA advances the hands at high speed.

Note that the hands can be advanced only and cannot be moved back. Take care so you do not go past the setting you want to make.

About the Backlight

In any mode (except when making any settings), press L to illuminate the digital display for about two seconds.

The backlight of the watch employs an electro-luminescent(EL) light, which loses illuminating power after very long use.

The illumination provided by the backlight may be hard to see when viewed under direct sunlight.

The watch will emit an audible sound whenever the display is illuminated. It does not indicate malfunction of the watch.

The backlight automatically stops illuminating whenever an alarm sounds.

Frequent use of the backlight shortens battery life.

Alarm Mode

Stopwatch Mode

Dual Time Mode

Alarm Mode

Hold down B.

Hour

Press B.

Minutes

Press B.

Hour

Minutes

Mode indicator

When an alarm is turned on, an alarm tone sounds for 20 seconds at the preset time each day.

To set the alarm time

1.In the Alarm Mode, hold down B for about two seconds, until “ADJ” and then the hour digits flash on the display. KeepB depressed until the hour digits flash.

2.Press C to increase the setting. Holding downC changes the current setting at high speed.

3.Press B to change the selection in the above sequence.

The format (12-hourand24-hour)of the alarm time matches the format you select for normal timekeeping.

When setting the alarm time using the 12-hourformat, take care to set the time correctly as morning or afternoon.

If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Alarm Mode automatically.

The alarm is turned on automatically whenever you change the alarm time setting.

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To switch the daily alarm on and off

In the Alarm Mode, press B to turn the daily alarm on and off.

ON

OFF

 

Press B.

To test the alarm

Hold down C while in the any mode to sound the alarm.

Stopwatch Mode

 

 

The Stopwatch Mode lets you measure elapsed time.

 

 

The range of the stopwatch is 23 hours, 59 minutes 59

 

 

seconds. The measuring unit for the first hour of elapsed

 

 

time measurement is 1/100-second.After that the unit is

 

 

one second. You can use the EL backlight at any time

 

 

while the stopwatch is operating by pressing L.

 

 

1. Press B to start the stopwatch.

 

 

 

2. Press B again to stop the stopwatch.

 

 

You can repeat steps 1 and 2 as many times as you

 

 

want.

 

 

 

3. To reset the stopwatch time to all zeros, hold down B.

 

 

After the first hour

 

Minutes

1/100 seconds

 

Seconds

 

 

 

Mode indicator

Hour

Seconds

 

Minutes

 

 

 

 

1

USER’S GUIDE 2327

Dual Time Mode

The Dual Time Mode lets you keep track of the time in another time zone.

To set the Dual Time

 

Hold down B.

 

Hour

 

Seconds

 

Press B.

 

Minutes

 

Press B.

Hour

Mode indicator

 

Minutes

1.In the Dual Time Mode, hold down B for about two seconds, until “ADJ” and then the hour digits flash on the display. KeepB depressed until the hour digits flash.

2.Press C to increase the setting. Holding downC changes the current setting at high speed.

3.Press B to move the selection around the display in the above sequence.

The format (12-hourand24-hour)of the Dual Time matches the format you select for normal timekeeping.

The seconds count is synchronized with the seconds count in the Timekeeping Mode.

If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Dual Time Mode automatically.

2