Casio 2253-1 User Manual

Size:
341.28 Kb
Download

Module No. 2253

2253-1

 

 

GENERAL GUIDE

If the contents of the display seem to be continually changing, see “AUTO DISPLAY FUNCTION” for information on how to stop it.

Press C to change from mode to mode.

In any mode, press L to illuminate the display for about two seconds.

Caution

The backlight of this watch employs an electro-luminescent(EL) light, which loses its illuminating power after very long term use.

Frequent use of the backlight shortens the battery life.

The watch emits an audible sound whenever the display is illuminated. This is because the EL light vibrates slightly when lit. It does not indicate malfunction of the watch.

Timekeeping Mode

File Mode

Alarm Mode

Stopwatch Mode

TIMEKEEPING MODE

This watch lets you select any two of 40 cities (TIME 1, TIME 2) as basic Timekeeping Mode times. Hold down D to toggle the Timekeeping Mode between TIME 1 and TIME 2.

You can display either the city code or year. Press A to toggle between display of the city code and year.

City code

Day of week

Press A.

Month-Day

TIME 1

Hold downD.

Press A.

TIME 2

To set the time and date

Year

Hold downD.

DST onindicator

Setting the time and date for either of the basic times (TIME 1 or TIME 2) automatically adjusts the settings of the other basic time.

You can turn daylight saving time (DST) on and off independently for TIME 1 and TIME 2.

1.While in the Timekeeping Mode, hold down A until the City Code flashes on the display.

2.Press C to change the selection (flashing) in the following sequence.

 

 

City Code

 

 

 

DST

 

 

Seconds

 

 

 

Hour

 

 

 

Minutes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Day

 

 

 

Month

 

 

 

 

Year

 

 

 

12/24-Hour

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Format

 

 

 

3.While the seconds setting is selected (flashing), press D to reset it to 00. If you pressD while the seconds setting is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of

00 to 29, the minutes count is unchanged.

While City Code setting is selected (flashing), press D orB to scroll through the City Code. (For full information on City Code, see the CITY CODE TABLE.)

While the DST setting is selected, press D to toggle it ON and OFF.

While the 12/24-hourformat setting is selected, pressD to toggle it between 12 and 24.

While any other setting is selected (flashing), press D to increase it orB to decrease it.

Holding down either button changes the setting at high speed.

4. After you set the time and date, press A to return to the Timekeeping Mode.

The day of the week is automatically set in accordance with the date.

The date can be set within the range of January 1, 1995 to December 31, 2039.

If you do not operate any button for a few minutes while a setting is flashing, the flashing stops and the watch goes back to the Timekeeping Mode automatically.

FILE MODE

Caution

The following causes all data stored in memory to be deleted. Be sure to always keep separate written copies of all important data.

Malfunction or repairs

Dead battery

Battery replacement

In no event will CASIO be liable for loss of data or any damages arising out of such loss.

Mode indicator

The File Mode lets you store up to 30 pairs

 

 

 

 

 

 

 

 

 

 

of name and telephone number data. The

 

 

 

 

 

 

 

 

 

 

name can be up to 8 characters long and the

 

 

 

 

 

 

 

 

 

 

number up to 12 digits. Data is automatically

 

 

 

 

 

 

 

 

 

 

sorted into alphabetical order based on the

 

 

 

 

 

 

 

 

 

 

name data. You can recall data by scrolling

 

 

 

 

 

 

 

 

 

 

through it on the display.

 

 

 

 

 

 

 

 

 

 

If you do not operate any button for a few

 

 

 

 

 

 

 

 

Number

minutes while in the File Mode, the watch

 

 

 

 

 

 

 

 

area

automatically goes back to the

 

 

 

 

 

 

 

 

 

 

Timekeeping Mode.

 

 

 

 

 

 

 

 

 

 

 

To input File data

Remaining memory

[New data display]

1.In the File Mode, press B orD until the new data display appears.

If the message “FULL” appears on the display, it means that memory is full. To store more data, you will first have to delete some of the data.

2.Hold down A until the flashing cursor appears on the name area.

3.Use B orD to input a character at the cursor position. The character changes in the following sequence. Holding down either button changes the character at high speed.

Press

D.

 

 

 

A to Z

 

 

 

 

 

 

 

 

 

/

 

 

 

 

 

(Space)

 

 

 

 

 

 

0 to 9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press

B.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.After you select the character you want, press C to advance the cursor to the right.

Repeat steps 3 and 4 until you complete name input.

You can input up to 8 characters in the name area.

5.After the name input is through, use C to move the cursor to the number area.

6.While the cursor is in the number area, use B orD to input a number you want. The character changes in the following sequence. Holding down either button changes the character at high speed.

Press D.

– (Hyphen)

0 to 9

 

 

 

(Space)

Press B.

7. After you select the character you want, press C to advance the cursor to the right.

Repeat steps 6 and 7 until you complete number input.

8. After inputting the data you want, press A to store it into memory.

The message “SORT” appears on the display for a few seconds.

The name area shows only 5 characters, but automatically scrolls from right to left to show all of the characters that make up the text.

To scroll through File data

In the normal File Mode (when the display is not flashing), press D to scroll forward orB to scroll backward through stored data.

The data item that is displayed when you exit the File Mode will be the first data to appear when you enter the File Mode again.

To edit File data

1.In the File Mode, use B andD to scroll through the data items and display the one you want to edit.

2.Hold down A until the flashing cursor appears on the display.

3.Use C to move the cursor to the character you want to change.

4.Use B orD to select the character you want.

For details, see “To input File data” (steps 3 through 4 for name input, or 6 through 7 for number).

5. After editing the data, press A to store it.

To delete File data

1.In the File Mode, use B andD to scroll through the data items and display the one you want to delete.

2.Hold down A until the flashing cursor appears on the display.

3.Press B andD at the same time to delete the data item.

The message “CLR” (clear) appears on the display for a few seconds.

At this time the cursor appears on the display ready for input.

4. Input data or press A to return to the File Mode.

Name area

2253-2

ALARM MODE

Mode indicator

PM indicator

Minutes

Hour

Alarm on indicator

Hourly time signal on indicator

Current time

When the Daily Alarm is turned on, the alarm sounds for 20 seconds at the preset time each day. Press any button to stop the alarm after it starts to sound. When the Hourly Time Signal is turned on, the watch beeps every hour on the hour.

The alarm sounds when the time selected for basic timekeeping in the Timekeeping Mode (TIME 1 or TIME 2) matches the alarm time you set.

To set the alarm time

1.Hold down A while in the Alarm Mode. The hour digits flash on the display because they are selected. At this time the Daily Alarm is turned on automatically.

2.Press C to change the selection in the following sequence.

Hour

 

 

 

Minutes

 

 

 

3. Press D to increase the selected digits andB to decrease them. Holding down either button changes the selection at high speed.

The format (12-hourand24-hour)of the alarm time matches the format you select for normal timekeeping.

When setting the alarm time using the 12-hourformat, take care to set the time correctly as morning (no indicator) or afternoon (P).

4. After you set the alarm time, press A to return to the Alarm Mode.

If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Alarm Mode automatically.

To switch the daily alarm and hourly time signal on and off

Press D while in the Alarm Mode to change the status of the daily alarm and hourly time signal in the following sequence.

Alarm on indicator

 

 

 

Hourly time signal on indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Both ON

Both OFF

Daily Alarm

Hourly Time

 

 

Only

Signal Only

To test the alarm

Hold down D while in the Alarm Mode to sound the alarm.

 

 

 

 

 

 

 

 

 

 

 

 

STOPWATCH MODE

 

Mode indicator

The Stopwatch Mode lets you measure elapsed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

time, split times, and two finishes. The range of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the stopwatch is 59 minutes, 59.99 seconds.

Current

 

 

 

 

 

 

 

 

 

 

time

 

 

 

 

 

 

 

 

Minutes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Seconds

 

 

 

 

 

 

1/100

 

seconds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(a) Elapsed time measurement

 

 

D

 

 

 

 

 

 

 

 

D

 

 

D

D

A

Start

 

Stop

Re-start

Stop

Clear

(b) Split time measurement

 

 

 

D

 

 

 

 

 

 

 

 

A

 

 

A

D

A

Start

 

Split

Split release

Stop

Clear

(c) Split time and 1st-2ndplace times

 

 

D

 

 

 

 

 

 

 

 

A

 

 

D

A

A

Start

 

Split

Stop

Split release

Clear

 

 

 

 

 

 

 

 

 

 

First runner

Second runner

Record time of

 

 

 

 

 

 

 

 

 

 

 

finishes.

finishes.

second runner.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Record time of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

first runner.

 

 

AUTO DISPLAY FUNCTION

The Auto Display function of this watch continually changes the contents of the display. Note that you cannot use any of the watch’s other functions while the Auto Display function is operating.

To turn the Auto Display on

Hold down C for about two or three seconds in any mode until the watch beeps.

To turn the Auto Display off

Hold down C for about two or three seconds until the watch beeps. At this time the watch is in the Timekeeping Mode.

Note

The Auto Display function cannot be performed while you are making settings (i.e. while digits or other setting are flashing on the display).

CITY CODE TABLE

City Code

City

GMT differential

 

 

 

 

ADL

ADELAIDE

+9.5

 

ANC

ANCHORAGE

–09

BER

BERLIN

+01

 

BKK

BANGKOK

+07

 

CAI

CAIRO

+02

 

CCS

CARACAS

–04

 

CHI

CHICAGO

–06

DAC

DHAKA

+06

 

DEL

DELHI

+5.5

 

DEN

DENVER

–07

DXB

DUBAI

+04

 

GUM

GUAM

+10

 

HKG

HONG KONG

+08

 

HNL

HONOLULU

–10

IST

ISTANBUL

+02

 

JED

JEDDAH

+03

 

JRS

JERUSALEM

+02

 

KBL

KABUL

+4.5

 

KHI

KARACHI

+05

 

LAX

LOS ANGELES

–08

LON

LONDON

+00

 

MEX

MEXICO CITY

–06

 

MIA

MIAMI

–05

MIL

MILAN

+01

 

MLE

MALE

+05

 

NOU

NOUMEA

+11

 

NYC

NEW YORK

–05

PAR

PARIS

+01

 

PPG

PAGO PAGO

–11

RGN

YANGON

+6.5

 

RIO

RIO DE JANEIRO

–03

ROM

ROME

+01

 

SEL

SEOUL

+09

 

SFO

SAN FRANCISCO

–08

SIN

SINGAPORE

+08

 

SYD

SYDNEY

+10

 

THR

TEHRAN

+3.5

 

TYO

TOKYO

+09

 

WLG

WELLINGTON

+12

 

YVR

VANCOUVER

–08

*Based on data as of December 1997.