Canon HMF306, HFM36 User Manual

0 (0)
Canon HMF306, HFM36 User Manual

PUB. DIE-0364-000xc

HD Camcorder

Instruction Manual

Important Usage Instructions

WARNING!

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING!

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

CAUTION:

DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE.

To reduce the risk of electric shock, do not expose this product to dripping or splashing.

The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident.

While using the compact power adapter, do not wrap it or cover it with a piece of cloth, and do not place it in confined narrow spaces. Heat may build up, the plastic case may deform and it could result in electric shock or fire.

CA-570 identification plate is located on the bottom.

Using any device other than the Compact Power Adapter CA-570 may damage the camcorder.

2

European Union (and EEA) only.

These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2002/96/EC),

the Battery Directive (2006/66/EC) and/or your national laws implementing those Directives.

This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE) and batteries and accumulators. Improper handling of this type of waste could have a possible impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources.

For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment.

(EEA: Norway, Iceland and Liechtenstein)

Trademark Acknowledgements

SD, SDHC and SDXC logos are trademarks of SD-3C, LLC.

Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

“x.v.Colour” and the “x.v.Colour” logo are trademarks.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

YouTube is a trademark of Google Inc.

Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.

This device incorporates exFAT technology licensed from Microsoft.

ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY MANNER THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE STREET, SUITE 300, DENVER, COLORADO 80206.

This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and noncommercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.

3

1,080 lines

Exciting Features and New Functions

1

High-Definition Video

Your camcorder’s full high-definition image sensor (Full HD CMOS) captures video at a resolution of 1,920 x 1,080

pixels2. Videos are then recorded in the memory in high definition, using AVCHD specifications3.

With your new HD camcorder, capturing the special moments in your life with amazing image quality and in lifelike vibrant colors is easy and fun!

bDual Flash

b

3g

Memory

Relay Recording

 

You can record in the built-in memory or on commercially available memory cards (033).

The built-in memory almost full? Use the memory card slot to keep on recording video without interruption (036).

1“Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels (scanning lines).

2Video is recorded at this resolution only when the recording mode is set to MXP or FXP mode. In other recording modes, the picture is recorded at 1,440 x 1,080 pixels.

3AVCHD is a standard for recording high-definition video. With AVCHD specifications, the video signal is recorded using MPEG-4 AVC/H.264 compression and the audio signal is recorded in Dolby Digital.

4

Smart AUTO (040)

Smart AUTO automatically selects the best scene mode for the scene you want to shoot. You get spectacular recordings every time without worrying about settings.

Video Snapshot

(065)

Shoot or capture short scenes and arrange them into a video clip set to your favorite background music.

Just point the camcorder and it will automatically select the best settings for your subject

Face Detection (063)

Image Stabilization

The camcorder automatically detects people’s faces and adjusts the focus and other settings accordingly for beautiful results.

Dynamic IS (061) compensates for camcorder shake when you shoot video while walking. Powered IS

(062) will produce stable shots when you zoom in on distant subjects (full telephoto).

5

Enjoying your Recordings on Other Devices

 

 

 

 

 

 

 

 

 

 

 

 

AVCHD discs4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Photo DVDs

 

 

 

 

 

 

 

Connect the camcorder to

 

 

 

 

 

 

 

 

 

 

Connect the camcorder

 

the optional DW-100 DVD

 

 

 

to an HDTV (0120)

 

Burner (0126, 130)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SD

Play video directly from your recorded memory card

Eye-Fi

Use an Eye-Fi card (0140) to wirelessly upload recordings to your computer or a video sharing Web site.

AVCHD-compatible HDTVs and digital recorders with an SD memory card slot5.

Save or upload to the Web.

 

Use the supplied software

High Definition

ImageMixer 3 SE (0123, 136).

 

MPEG-2

 

Standard Definition

 

AVCHD

 

SD-Video

 

Convert your HD movies, in the

Standard DVDs

camcorder itself, to standard definition

 

files (0131, 137).

 

4AVCHD discs containing scenes recorded in MXP mode cannot be created with the optional DW-100 DVD burner. Use the supplied software ImageMixer 3 SE to

back up such scenes.

5Refer to the instruction manual of the device. Depending on the device used, correct playback may not be possible even if the device is AVCHD-compatible. In such case, play back the recordings on the memory card using the camcorder.

6

7

Table of contents

Introduction

4 Exciting Features and New Functions

12 About this Manual

14Getting to Know the Camcorder

14Supplied Accessories and CD-ROMs

16Names of Parts

Preparations

19Getting Started

19 Charging the Battery Pack

22 Preparing the Accessories

24 Adjusting the Position and Brightness of the LCD Screen

26Basic Operation of the Camcorder

26Using the Touch Screen

27Operating Modes

28Using the Menus

31 First Time Settings

31Setting the Date and Time

32Changing the Language

32Changing the Time Zone

33Using a Memory Card

33 Memory Cards Compatible for Use with the Camcorder

35 Inserting and Removing a Memory Card

35bSelecting the Memory for the Recordings

36bRelay Recording of Movies

37Initializing the Built-in Memory (bonly) or Memory Card

8 Table of contents

Dual Shot Mode

39 Basic Recording

39Shooting Video and Taking Photos in Dual Shot Mode

40About the Smart AUTO mode

43Zooming

44Quick Start Function

Video

46Basic Playback

46 Playing Back the Video

49The Index Selection Screen: Selecting the Content to Play Back

513D Flip View

52Narrowing Down the Scenes Shown in the Index Screen

53Deleting Scenes

55 Advanced Functions

55Shooting Video in yManual Mode

56Selecting the Video Quality (Recording Mode)

57Special Scene Recording Programs

60Cinema Mode: Giving a Cinematic Look to your Recordings

61Advanced Image Stabilization

62Pre-Recording

63Face Detection

65Touch & Track

65Video Snapshot

66Digital Effects

67Manually Setting the Shutter Speed or Aperture

70Manual Exposure Adjustment

71Automatic Gain Control (AGC) Limit

71Manual Focus Adjustment

73White Balance

74Image Effects

75Mini Video Light

77Self Timer

78Audio Recording Level

79Using Headphones

Table of contents 9

81 Using the Mini Advanced Shoe

81 Using an External Microphone

83Using a Zoom Remote Controller

84Selecting the Playback Starting Point

86 Playing Back Scenes Set to Background Music

89Onscreen Displays and Data Code

90Playlist and Scene Operations

90Editing the Playlist: Adding, Deleting, Moving and Playing Back

92Capturing Photos and Video Snapshot Scenes from a Movie

94Dividing Scenes

Photos

96Basic Playback

96Viewing Photos

98Deleting Photos

100 Additional Functions

100Taking Photos in y Manual Mode

101Selecting Photo Size and Quality

103Flash

104Drive Mode: Continuous Shooting and Exposure Bracketing

106Taking Photos while Recording Movies (Simultaneous Recording)

107Light Metering Mode

108Slideshow

108Magnifying Photos during Playback

109Rotating Photos

109Histogram Display

110Protecting Photos

112 Printing Photos

112 Printing Photos (Direct Print)

114 Print Orders

10 Table of contents

External Connections

116Terminals on the Camcorder

117Connection Diagrams

120Playback on a TV Screen

121Saving and Sharing Your Recordings

121bCopying Recordings to a Memory Card

123Saving Recordings on a Computer

126Saving Movies onto High-Definition Discs (AVCHD/Blu-ray Discs)

130bSaving Movies onto Standard-Definition Discs (DVD)

134Saving Photos on Photo DVDs

135Copying Recordings to an External Video Recorder

136bUploading Movies to Video Sharing Web Sites

Additional Information

142Appendix: Menu Options Lists

142 FUNC. Panel

146 Setup Menus

158

Appendix: Onscreen Icons and Displays

163

Trouble?

163

Troubleshooting

170

List of Messages

180

Do’s and Don’ts

180

Handling Precautions

185Maintenance/Others

186Using the Camcorder Abroad

187General Information

187Accessories

188Optional Accessories

193

Specifications

197

Index

Table of contents 11

About this Manual

Thank you for purchasing the Canon LEGRIA HF M36 / LEGRIA

HF M306. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (0163).

Conventions Used in this Manual

IMPORTANT: Precautions related to the camcorder’s operation.

NOTES: Additional topics that complement the basic operating procedures.

POINTS TO CHECK: Restrictions or requirements regarding the function described.

0: Reference page number within this manual.

To complete some operations you will need to refer also to other instruction manuals. This will be indicated with the following icons:

rRefer to the Photo Applications’ Instruction Manual, included as a PDF file in the supplied Camcorder Supplemental Disc.

sRefer to the instruction manual of the optional DW-100 DVD Burner.

b: Text that applies only to the model shown in the icon.

The following terms are used in this manual:

When not specified as “memory card” or “built-in memory”, the term “memory” by itself refers to both.

“Scene” refers to one movie unit from the point you press the gbutton to start recording until you press again to pause the recording.

The photos included in this manual are simulated pictures taken with a still camera. Unless indicated otherwise, illustrations and menu icons refer to the b.

12 Introduction

indicates that a function is available in the operating mode indicated and indicates that the function is not available. For a detailed explanation refer to Operating Modes (027).

Brackets [ ]are used to refer to control buttons and menu options you will touch on the screen and to other onscreen messages and displays.

Self Timer

Operating modes:

[FUNC.] 8[MENU] 888[Self Timer] 8

[AOn n] 8[a]

nappears.

Repeat, selecting [BOff], to turn off the self timer.

mode: In record pause mode, press g.

The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen.

mode: Press j, first halfway to activate the autofocus and then fully.

The camcorder will record the photo after a 10-second countdown*. The countdown appears on the screen.

* 2 seconds when using the wireless controller.

NOTES

Once the countdown has begun, any of the following actions will cancel the self timer.

-Pressing g(when recording movies) or jfully (when recording photos).

-Turning off the camcorder.

The names of physical buttons and switches on the camcorder are indicated within a “button” frame.

For example w.

The 8arrow is used to abbreviate menu selections. For a detailed explanation on how to use the menus, refer to Using the Menus (028). For a concise summary of all available menu options and settings, refer to the appendix Menu Options Lists (0142).

Introduction 13

Supplied Accessories and CD-ROMs

The following accessories are supplied with the camcorder:

XCA-570 Compact Power Adapter

(incl. power cord)

BP-808 Battery PackW

XWL-D89 Wireless Controller

(incl. CR2025 lithium button battery)

STV-250N Stereo Video CableW

Yellow • Red • White plugs

XCTC-100/S Component Cable

Red • Green • Blue plugs

IFC-300PCU USB CableW

XQuick Guide

14 Introduction

The following CD-ROMs and software are supplied with the camcorder:

PIXELA Application - Disc 1 CD-ROM* and ‘PIXELA Applications’ Installation Guide

-ImageMixer 3 SE Transfer Utilities – Software for saving and transferring movies and music files you can use as background music.

PIXELA Application - Disc 2 CD-ROM*

-ImageMixer 3 SE Video Tools – Software for managing, editing, and playing back movies.

Y Instruction Manual/Photo Applications Ver.34.1*/Music Data Disc CD-ROM (referred in the manual as the Camcorder Supplemental Disc). Contains the following components.

-Full-version instruction manual of the camcorder (this PDF file).

-Photo Applications - Software for saving, managing, and printing photos*.

-Music files that can be used as background music during playback**.

* The CD-ROM includes the instruction manual of the software (on PDF file). **These music files are for exclusive use with the supplied software ImageMixer 3

SE. The disc cannot be played back on CD players. For more details, refer to ‘ImageMixer 3 SE Software Guide’ on the PIXELA Application Disc 1 CD-ROM.

Introduction 15

Names of Parts

Left side view

1 DISP. (onscreen display) button

 

(089)/

 

BATT. INFO button (0162)

 

2 2(camera/play) button (027)

 

3 Speaker (048)

 

4 Memory card slot cover

 

5 Memory card slot (035)

 

6 AV OUT terminal (0116, 118)/

 

X(headphones) terminal (079)

 

7 BATTERY RELEASE switch (020)

 

8 ACCESS indicator (039, 55, 100)

 

9 Strap mount (023)

Right side view

qA COMPONENT OUT terminal

(0116, 118)

 

aA USB terminal (0116, 119)

 

sA HDMI OUT terminal (0116, 117)

 

dA Grip belt (023)

 

fA Instant AF sensor (0147)

 

gA Stereo microphone (078)

 

hA Mini video light (075)

 

jA Flash (0103)

Front view

16 Introduction

Top view

LCD panel

Back view

Ak Mini advanced shoe (081)

Al Mode switch (027)

qS PHOTO button (039, 100) aS Zoom lever (043)

sS VIDEO SNAP (video snapshot) button (065)

dS POWER button

Sf ON/OFF (CHG) (charge) indicator: Green – ON

Orange – Standby (044) Red – Charging (019)

Sg Remote sensor (022)

hS LCD touch screen (024, 26)

Sj POWERED IS button (062)/ WEB button* (0136)

Sk Battery attachment unit (019) Sl START/STOP button (039, 55)

Dq DC IN terminal (019)

* bonly.

Introduction 17

Bottom view

aD Serial number

Ds Tripod socket (0181)

Wireless Controller WL-D89

1 START/STOP button (039, 55)

2 b(index selection) button (049) Press and hold for more than 2 seconds to switch between shooting and playback mode.

3 MENU button (029, 146)

4 DISP. (onscreen display) button (089)

5 SET button

6 B(stop) button (046)

7 PHOTO button (039, 100)

8 Zoom buttons (043)

9 Navigation buttons ( Z/O/y/A) qA A/C(play/pause) button (046)

18 Introduction

Preparations

This chapter describes basic operations, such as using the touch panel, navigating the menus, and first time settings to help you learn more about your camcorder.

Getting Started

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the compact power adapter. Charge the battery pack before use. For approximate charging times and recording/playback times with a fully charged battery pack, refer to Charging Times (0189) and

Recording and Playback Times (0189).

1Connect the power cord to the compact power adapter.

2Plug the power cord into a power outlet.

3Connect the compact power adapter to the camcorder’s DC IN terminal.

4Attach the battery pack to the camcorder.

Press the battery pack softly into the battery attachment unit and slide it up until it clicks in place.

DC IN terminal

Preparations 19

5 Charging will start when the

ON/OFF (CHG) (charge) indicator

camcorder is turned off.

• If the camcorder was on, the green

ON/OFF (CHG) indicator will go out when you turn off the camcorder.

After a moment, the ON/OFF (CHG) indicator will start flashing in red (battery pack charging). The red ON/ OFF (CHG) indicator will go out when

the battery pack is fully charged.

• If the indicator flashes quickly, refer to

Troubleshooting (0163).

To remove the battery pack

1 Slide Uin the direction of the arrow and hold it pressed down.

2 Slide the battery pack down and then pull it out.

BATTERY RELEASE switch

IMPORTANT

Turn off the camcorder before connecting or disconnecting the compact power adapter. After pressing xto turn off the camcorder, important data is updated in the memory. Be sure to wait until the green ON/OFF (CHG) indicator goes out.

We recommend charging the battery pack in temperatures between 10 °C and 30 °C. Outside the temperature range of 0 °C to 40 °C, charging will not start.

Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder.

20 Preparations

To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc.

NOTES

The battery pack will be charged only when the camcorder is off.

If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the battery pack will not be consumed.

Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge.

We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

Preparations 21

Preparing the Accessories

Wireless Controller

First, insert the supplied CR2025 lithium button battery into the wireless controller.

1 Press the tab in the direction of the arrow and pull out the battery holder.

2 Place the lithium button battery with the + side facing up.

3 Insert the battery holder.

Tab

To use the wireless controller

Point the wireless controller at the camcorder’s remote sensor when you press the buttons.

You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder.

NOTES

The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

22 Preparations

Grip Belt and Straps

Fasten the grip belt.

Adjust the grip belt so that you can reach the zoom lever with your index finger, and the gbutton with your thumb.

To remove the grip belt

1Lift the padded handgrip's flap and detach the strap from the Velcro pad.

2Pull the strap to remove it first from the front bracket on the camcorder, then to unthread it from the handgrip and finally to remove it from the rear bracket on the camcorder.

Preparations 23

To attach an optional wrist strap

Pass the attaching end of the wrist strap through the rear bracket on the camcorder, thread the wrist strap through the loop and fasten.

You can also attach the wrist strap to the strap mount on the grip belt to use both for extra convenience and protection.

To attach an optional shoulder strap

Pass the ends of the shoulder strap through the strap mount on the grip belt and adjust the length of the strap.

Adjusting the Position and Brightness of the LCD Screen

Rotating the LCD Panel

Open the LCD panel 90 degrees.

You can rotate the panel 90 degrees downward.

You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful in the following cases:

-To include yourself in the picture when recording with the self timer.

-To allow the camcorder to be operated with the wireless controller from the front.

24 Preparations

180°

180°

90°

Subject can monitor the LCD screen

NOTES

About the LCD screen: The screen is produced using extremely high-pre- cision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction.

LCD Backlight

When recording in bright places it may be difficult to use the LCD screen. Turn on the LCD backlight to make it brighter.

With the camcorder on, hold hpressed down for more than 2 seconds.

Repeat this action to switch the LCD backlight between off (normal) and on (bright).

NOTES

The LCD backlight does not affect the brightness of the recordings.

Using the bright setting will shorten the effective usage time of the battery pack.

You can further adjust the brightness of the LCD screen with the 68[LCD Brightness] setting, or dim it with the 68[LCD Screen Dimmer] setting to use in places where the light from the LCD screen can be a nuisance.

Preparations 25

Basic Operation of the Camcorder

Using the Touch Screen

The control buttons and menu items that appear on the touch screen change dynamically depending on the operating mode and the task you are performing. With the intuitive touch screen interface you have all the controls at your fingertips.

Touch

Touch a menu item to select it, or a control button to perform the corresponding action. For some functions, such as Touch & Track (065) and face detection (063), you can touch a subject that appears on the touch screen to select it and have the camcorder choose the optimal settings.

Drag

Swipe your finger up and down or left and right across the screen to scroll menus, to browse through index screen pages or to adjust slider controls (for example, to adjust the volume).

IMPORTANT

The camcorder uses a pressure-sensitive touch screen. Press firmly when using touch operations.

In the following cases, you may not be able to perform touch operations correctly.

-Operating the touch screen with wet or gloved hands or using your fingernails or other hard-tipped objects such as ballpoint pens.

-Applying excessive force or forcefully scratching the touch screen.

-Attaching commercially available screen protectors or adhesive film onto the touch screen's surface.

26 Preparations

For details about how to take care of the touch screen, refer to Handling Precautions (0180), Cleaning (0185).

Operating Modes

Recording

When recording video or photos, the camcorder’s operating mode is determined by the position of the mode switch and the onscreen control buttons.

Operating

Mode switch

Onscreen icon

Operation

mode

 

 

 

 

 

 

 

Dual Shot Record video and take photos easily, letting the camcorder take care of all the settings – Great for beginners or if you just prefer not to bother with detailed camcorder settings.

*

Easy recording of movies and

photos (039).

 

Flexible recording Use one of the dedicated recording modes to enjoy full access to the menus and advanced functions and change the camcorder’s settings to your preference.

Touch [4] to record movies

(055).

 

Touch [3] to record

photos

(0100).

 

*The mode icon displayed will change according to the optimal mode selected by the Smart AUTO function (040).

Playback

Press the camera/play button Sto switch the camcorder between camera (recording) mode and playback mode. The playback mode you switch into depends on the initial recording mode.

You can press Swhen the camcorder is off to turn it on directly in playback mode.

Preparations 27

Initial mode

 

Operating mode

Operation

Press Sin

 

 

 

Playing back movies

or

mode.

 

 

([Original] index screen) (046).

 

 

 

 

 

Press Sin

 

mode.

 

Viewing photos

 

 

([Photos] index screen) (096).

 

 

 

 

 

 

 

 

 

NOTES

bWhen switching to a playback mode, the memory selected for playback will be the same currently used for recording.

You can also press and hold Bon the wireless controller for more than 2 seconds to switch between recording and playback mode.

Using the Menus

Many of the camcorder’s functions can be adjusted from the FUNC. panel and the setup menus. In mode, however, menus cannot be accessed and, except in a few cases, most menu settings will return to their default values.

For details about the available menu options and settings, refer to the appendix Menu Options Lists (0142).

Operating modes:

The FUNC. Panel and Edit Panel

In and mode, the FUNC. panel shows a convenient overview of frequently used shooting functions. Touch [FUNC.] to access the FUNC. panel and then touch the function you want to set or adjust. You may need to drag your finger up and down along the scroll bar to find the control button of the desired function.

Touch the control

 

 

 

 

 

Drag your finger up

 

 

 

 

 

 

 

 

 

 

and down along the

button of the

 

 

 

 

scroll bar to display

desired function

 

 

 

 

the rest of the panel

 

 

 

 

 

28 Preparations

In and mode, touch [Edit] to display a similar panel containing the various operations that are available after selecting one or more scenes or photos (for example, deleting, adding scenes to the playlist, protecting photos, etc.). Touch the control button of the desired operation.

Example of the Edit panel in mode

Touch the control button of the desired operation

The Setup Menus

1 or mode only: Touch [FUNC.]

2 Touch [MENU] to open the setup menus.

You can also press uon the wireless controller to open the setup menus.

3 Touch the tab of the desired menu.

4Drag your finger up and down along the scroll bar to bring the setting you want to change into the orange selection bar.

Menu items not available appear grayed out.

5When the desired menu item is in the orange bar, touch inside the frame on the right.

6Touch the desired option and touch [a].

You can touch [a] to close the menu at any time.

Preparations 29

NOTES

A small font size is used in menu screens so you can see the options currently selected. You can enlarge the font size by setting 68 [Font Size] to [ALarge] but only the icons of the currently selected options will appear on the screen.

30 Preparations

Loading...
+ 170 hidden pages