Canon A2200SL, A3300ISPK User Manual

0 (0)

Camera User Guide

ENGLISH

• Make sure you read this guide, including the Safety

Precautions before using the camera.

• Reading this guide will help you learn to use the camera

properly.

• Store this guide safely so that you can use it in the future.

COPY

Check if the following items are included in your camera package.

If anything is missing, contact the retailer where you purchased the camera.

Using the PDF Manuals

The following PDF manuals are included in the Readme folder of the CD-ROM:

When the software is installed on your computer, the PDF manuals will be copied to

the computer and you can refer to them by clicking the shortcuts on the desktop.

• Camera User Guide (This Guide)

Once you have mastered the basics, use the camera’s many

features to shoot more challenging photos.

• Software Guide

Read when you want to use the included software.

• A memory card is not included.

• Adobe Reader is required to view the PDF manuals.

Checking the Package Contents

Camera

Battery Pack NB-8L

(with Terminal Cover)

Battery Charger

CB-2LA/CB-2LAE

Wrist Strap

WS-800

Interface Cable

IFC-400PCU

AV Cable

AVC-DC400

AV Cable

AVC-DC300

A3300 IS

A3200 IS A2200

Warranty

Card

Getting Started

DIGITAL CAMERA

Solution Disk

COPY

Test Shots and Disclaimer

Take some initial test shots and play them back to make sure the images

were recorded correctly. Please note that Canon Inc., its subsidiaries and

affiliates, and its distributors are not liable for any consequential damages

arising from any malfunction of a camera or accessory, including memory

cards, that results in the failure of an image to be recorded or to be recorded

in a way that is machine readable.

Warning Against Copyright Infringement

The images recorded with this camera are intended for personal use. Do not

record images that infringe upon copyright laws without the prior permission

of the copyright holder. Please be advised that in certain cases the copying

of images from performances, exhibitions, or commercial properties by

means of a camera or other device may contravene copyright or other legal

rights even if the image was shot for personal use.

Warranty Limitations

This camera’s warranty is only effective in the country of sale. If there is a

problem with the camera while abroad, please return it to the country of sale

before proceeding with a warranty claim to a Canon Customer Support Help

Desk. For Canon Customer Support contacts, please see the customer

support list supplied with your camera.

LCD Monitor (Screen)

• The LCD monitor is produced with extremely high-precision manufacturing

techniques. More than 99.99% of the pixels operate to specification, but

occasionally non-performing pixels may appear as bright or dark dots. This

is not a malfunction and has no effect on the recorded image.

• The LCD monitor may be covered with a thin plastic film for protection

against scratches during shipment. If so, remove the film before using the

camera.

Camera Body Temperature

Please take care when operating the camera for an extended period as the

camera body may become warm. This is not a malfunction.

Read This First

COPY

What Do You Want to Do?

z Shoot, leaving it to the camera to make settings .........................24

z Just take pictures (Easy mode)....................................................29

IwP

At the beach

(p. 69)

Against snow

(p. 70)

Kids and pets

(p. 69)

Portraits

(p. 68)

Take good people shots

Landscape

(p. 69)

Foliage

(p. 69)

Shoot various other scenes

Fireworks

(p. 70)

Shoot with special effects

Low Light

(p. 69)

Miniature Effect

(p. 74)

Toy Camera Effect

(p. 75)

Fish-eye Effect

(p. 73)

Super vivid colors

(p. 73)

Poster Effect

(p. 73)

Monochrome

(p. 76)

Shoot

z Shoot in Discreet mode................................................................72

z Adjust image settings when shooting (Live View Control) ...........71

Focus on faces

..................................................................24, 68, 98

z Shoot in places where I cannot use the flash

(turn off the flash) ......................................................................... 56

z Take pictures with me in them too (self-timer) .................60, 62, 80

z Insert the date and time into my shots .........................................59

COPY

What Do You Want to Do?

z Look at my pictures ...................................................................... 27

z Easy playback (Easy Mode).........................................................29

z Automatically play back pictures (slideshow).............................116

z Look at my pictures on a TV ......................................................120

z Look at my pictures on a computer. ............................................. 34

z Quickly search pictures ......................................................114, 115

z Erase pictures ......................................................................28, 125

View

z Shoot movies ...............................................................................30

z View movies ................................................................................. 32

Shoot/View Movies

z Easily print pictures .................................................................... 138

z Save images to a computer .........................................................34

Save

z Turn off sounds ............................................................................50

z Use the camera abroad........................................................39, 155

z Understand what is displayed on the screen .............................171

Other

COPY

Chapters 1 – 3 explain the basic operations and frequently used functions of

this camera. Chapters 4 onward explain the advanced functions, letting you

learn more as you read each chapter.

Checking the Package Contents .......2

Read This First ..................................3

What Do You Want to Do? ................4

Table of Contents ..............................6

Conventions Used in This Guide .......9

Safety Precautions...........................10

Charging the Battery ........................14

Compatible Memory Cards

(Sold Separately) ...........................16

Inserting the Battery and Memory

Card...............................................16

Setting the Date and Time ...............19

Setting the Display Language..........21

Formatting Memory Cards ...............22

Pressing the Shutter Button .............23

Taking Pictures (Smart Auto)...........24

Viewing Images ...............................27

Erasing Images ................................28

Shooting or Viewing Images in

Easy Mode.....................................29

Shooting Movies ..............................30

Viewing Movies ................................32

Transferring Images to a Computer

for Viewing.....................................34

Accessories .....................................38

Separately Sold Accessories ...........39

Components Guide ..........................42

Screen Display.................................46

Indicator ...........................................47

FUNC. Menu – Basic Operations ....48

MENU – Basic Operations .............. 49

Changing the Sound Settings ......... 50

Adjusting the Screen Brightness..... 52

Returning the Camera to Default

Settings ......................................... 53

Power Saving Function

(Auto Power Down) ....................... 54

Clock Functions............................... 54

Turning the Flash Off ...................... 56

Zooming in More Closely on

Subjects (Digital Zoom)................. 57

Inserting the Date and Time ............ 59

Using the Self-Timer ....................... 60

Changing the Recording Pixel

Setting (Image Size) ..................... 63

Changing the Compression

Ratio (Image Quality) .................... 63

Shooting in Various Conditions....... 68

Easily Changing the Brightness and

Color When Shooting

(Live View Control)........................ 71

Shooting in Discreet Mode.............. 72

Adding Effects and Shooting

(Creative Filters) ........................... 72

Detecting a Face and Shooting

(Smart Shutter) ............................. 77

Shooting Long Exposures............... 81

Table of Contents

1 Getting Started ..................13

2 Learning More ................... 41

3 Shooting with Commonly

Used Functions .................55

4 Adding Effects and Shooting

in Various Conditions .......67

COPY

Table of Contents

Shooting in Program AE ................. 84

Adjusting the Brightness

(Exposure Compensation) ............ 85

Turning the Flash On ...................... 85

Adjusting the White Balance ........... 86

Changing the ISO Speed................ 87

Correcting the Brightness and

Shooting (i-Contrast)..................... 88

Continuous Shooting....................... 89

Changing the Tone of an Image

(My Colors) ................................... 90

Shooting Close-ups (Macro) ........... 91

Shooting Far Away Subjects

(Infinity) ......................................... 91

Changing the AF Frame Mode........ 92

Choosing the Subject to Focus On

(Tracking AF) ................................ 94

Magnifying the Focal Point.............. 95

Shooting with the AF Lock .............. 96

Shooting with Servo AF .................. 97

Choosing the Person to Focus On

(Face Select) ................................ 98

Changing the Metering Method....... 99

Shooting with the AE Lock............ 100

Shooting with the FE Lock ............ 100

Shooting with Slow Synchro ......... 101

Red-Eye Correction ...................... 102

Checking for Shut Eyes ................ 103

Shooting Using a TV as

the Display .................................. 103

Changing the Movie Mode............ 106

Shoot Movies That Look Like a

Miniature Model

(Miniature Effect) ......................... 106

Changing the Image Quality.......... 108

AE Lock/Exposure Shift................. 109

Other Shooting Functions.............. 110

Editing ........................................... 111

Quickly Searching Images............. 114

Searching for Images Using the

Jump Display............................... 115

Viewing Slideshows....................... 116

Checking the Focus....................... 117

Magnifying Images ........................ 118

Displaying Various Images

(Smart Shuffle) ............................ 119

Changing Image Transitions .........120

Viewing Images on a TV ...............120

Protecting Images ......................... 122

Erasing All Images ........................125

Tagging Images as Favorites........127

Organizing Images by Category

(My Category) .............................128

Rotating Images ............................130

Resizing Images............................ 131

Trimming ....................................... 132

Correcting the Brightness

(i-Contrast) .................................. 134

Correcting the Red-Eye Effect.......135

Printing Images .............................138

Choosing Images for Printing

(DPOF)........................................ 145

5 Choosing Settings

Yourself..............................83

6 Using Various Functions for

Shooting Movies .............105

7 Using Various Playback and

Editing Functions ........... 113

8 Printing ............................ 137

COPY

Table of Contents

Changing Camera Settings............150

Changing Shooting Function

Settings........................................157

Changing Playback Function

Settings........................................161

Using Household Power ................164

Troubleshooting ............................ 165

List of Messages That Appear

on the Screen.............................. 169

Information Displayed

on the Screen.............................. 171

Handling Precautions .................... 175

Functions Available in Each

Shooting Mode............................ 176

Menus ........................................... 184

Specifications ................................ 194

Index ............................................. 198

9 Customizing Camera

Settings............................ 149

10 Useful Information .......... 163

COPY

• Icons are used in the text to represent the camera buttons and dials.

• Language that displays on the screen appears inside [ ] (square brackets).

• The directional buttons and FUNC./SET button are represented by the

following icons.

• : Things you should be careful about

• : Troubleshooting tips

• : Hints for getting more out of your camera

• : Supplemental information

• (p. xx): Reference pages (“xx” stands for a page number)

• This guide assumes all functions are at their default settings.

• The various types of memory cards that can be used in this camera are

collectively referred to as memory cards in this guide.

• Functions that differ depending on the camera model are indicated with the

following icons:

Functions and precautions for the PowerShot A3300 IS only.

Functions and precautions for the PowerShot A3200 IS only.

Functions and precautions for the PowerShot A2200 only.

Explanations without these icons apply to all three models.

• PowerShot A3300 IS screenshots and illustrations are used for the

explanations in this guide.

Conventions Used in This Guide

Right button

FUNC./SET button

Up button

Left button

Down button

A3300 IS

A3200 IS

A2200

COPY

• Before using the product, please ensure that you read the safety precautions described

below. Always ensure that the product is used correctly.

• The safety precautions noted on the following pages are intended to prevent injuries to

yourself and other persons, or damage to the equipment.

• Be sure to also check the guides included with any separately sold accessories you

use.

Warning

Denotes the possibility of serious injury or death.

• Do not trigger the flash in close proximity to people’s eyes.

Exposure to the intense light produced by the flash could damage eyesight. In particular,

remain at least one meter (39 inches) away from infants when using the flash.

• Store this equipment out of the reach of children and infants.

Strap: Putting the strap around a child’s neck could result in asphyxiation.

• Use only recommended power sources.

• Do not attempt to disassemble, alter or apply heat to the product.

• Avoid dropping or subjecting the product to severe impacts.

• To avoid the risk of injury, do not touch the interior of the product if it has been

dropped or otherwise damaged.

• Stop using the product immediately if it emits smoke, a strange smell, or

otherwise behaves abnormally.

• Do not use organic solvents such as alcohol, benzine, or thinner to clean the

equipment.

• Do not let the product come into contact with water (e.g. sea water) or other

liquids.

• Do not allow liquids or foreign objects to enter the camera.

This could result in electrical shock or fire.

If liquids or foreign objects come into contact with the camera interior, immediately turn

the camera power off and remove the battery.

If the battery charger becomes wet, unplug it from the outlet and consult your camera

distributor or a Canon Customer Support Help Desk.

• Use only the recommended battery.

• Do not place the battery near or in direct flame.

• Unplug the power cord periodically, and using a dry cloth, wipe away any dust

and dirt that has collected on the plug, the exterior of the power outlet, and the

surrounding area.

• Do not handle the power cord with wet hands.

• Do not use the equipment in a manner that exceeds the rated capacity of the

electrical outlet or wiring accessories. Do not use if the power cord or plug are

damaged, or not fully plugged into the outlet.

• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals

or plug.

The battery may explode or leak, resulting in electrical shock or fire. This could cause

injury and damage the surroundings. In the event that a battery leaks and the battery acid

contacts eyes, mouth, skin or clothing, immediately flush with water.

Safety Precautions

COPY

Safety Precautions

• Turn the camera off in places where camera use is prohibited.

The electromagnetic waves emitted by the camera may interfere with the operation of

electronic instruments and other devices. Exercise adequate caution when using the

camera in places where use of electronic devices is restricted, such as inside airplanes

and medical facilities.

• Do not play the supplied CD-ROM(s) in any CD player that does not support data

CD-ROMs.

It is possible to suffer hearing loss from listening with headphones to the loud sounds of

a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio

CD player (music player) could damage the speakers.

Caution

Denotes the possibility of injury.

• Be careful not to bang the camera or subject it to strong impacts or shocks when

hanging it by the strap.

• Be careful not to bump or push strongly on the lens.

This could lead to injury or damage the camera.

• When using the flash, be careful not to cover it with your fingers or clothing.

This could result in burns or damage to the flash.

• Avoid using, placing or storing the product in the following places:

- Places subject to strong sunlight

- Places subject to temperatures above 40 °C (104 °F)

- Humid or dusty areas

These could cause leakage, overheating or an explosion of the battery, resulting in

electrical shock, fire, burns or other injuries.

• The slideshow transition effects may cause discomfort when viewed for

prolonged periods.

Caution

Denotes the possibility of damage to the equipment.

• Do not aim the camera at bright light sources (such as the sun on a clear day).

Doing so may damage the image sensor.

• When using the camera on a beach or at a windy location, be careful not to allow

dust or sand to enter the camera.

This may cause the product to malfunction.

• In regular use, small amounts of smoke may be emitted from the flash.

This is due to the high intensity of the flash burning dust and foreign materials stuck to the

front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from

the flash to prevent heat build-up and damage to the unit.

COPY

Safety Precautions

• Remove and store the battery when you are not using the camera.

If the battery is left inside the camera, damage caused by leakage may occur.

• Before you discard the battery, cover the terminals with tape or other insulators.

Contacting other metal materials may lead to fire or explosions.

• Unplug the battery charger from the power outlet after charging is complete, or

when you are not using it.

• Do not place anything, such as cloth on top of the battery charger while it is

charging.

Leaving the unit plugged in for a long period of time may cause it to overheat and distort,

resulting in fire.

• Do not place the battery near pets.

Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or

damage.

• Do not sit down with the camera in your pocket.

Doing so may cause malfunctions or damage the screen.

• When putting the camera in your bag, ensure that hard objects do not come into

contact with the screen.

• Do not attach any hard objects to the camera.

Doing so may cause malfunctions or damage the screen.

COPY

Getting Started

This chapter explains preparations before shooting, how to shoot in

A mode, and then how to view and erase the images you take. The

latter part of this chapter explains how to shoot and view images in

Easy mode, how to shoot and view movies, and how to transfer images

to a computer.

Attaching the Strap/Holding the Camera

• Attach the included strap and wrap it around your wrist to avoid dropping

the camera during use.

• Keep your arms tight against your body while holding the camera firmly by

the sides when shooting. Be sure that your fingers do not block the flash.

Strap

COPY

Use the included charger to charge the battery. Be sure to charge the battery

as it is not charged at the time of purchase.

Remove the cover.

Insert the battery.

z Align the o marks on the battery and

charger, then insert the battery by sliding it

in ( ) and down ( ).

Charge the battery.

z For CB-2LA: Flip out the plug ( ) and

plug the charger into a power outlet ( ).

z For CB-2LAE: Plug the power cord into

the charger, then plug the other end into a

power outlet.

X The charge lamp lights orange and

charging starts.

X The charge lamp will light green when

charging has finished. Charging takes

approx. 1 hour and 30 minutes.

Remove the battery.

z Unplug the battery charger from the power

outlet, then remove the battery by sliding it

in ( ) and up ( ).

Charging the Battery

CB-2LA

CB-2LAE

To protect the battery and prolong its life, do not charge it for longer than

24 hours continuously.

COPY

Charging the Battery

Number of Possible Shots

• The number of shots that can be taken is based on the Camera & Imaging Products

Association (CIPA) measurement standard.

• Under some shooting conditions, the number of shots that can be taken may be less

than mentioned above.

Battery Charge Indicator

An icon or message will appear on the screen indicating the battery’s charge

state.

Number of Shots

Approx. 230 Approx. 250 Approx. 280

Playback Time

Approx. 5 hours Approx. 6 hours Approx. 6 hours

Display Summary

Sufficient charge.

Slightly depleted, but sufficient.

(Blinking red) Nearly depleted. Charge the battery.

“Change the battery pack.” Depleted. Recharge the battery.

Using the battery and charger effectively

• Charge the battery on the day, or the day before, it will be used.

Charged batteries continue to discharge naturally even if they are not used.

• How to store the battery for long periods:

Deplete and remove the battery from the camera. Attach the terminal cover and

store the battery. Storing a battery for long periods of time (about a year) without

depleting it may shorten its life span or affect its performance.

• The battery charger can also be used when abroad.

The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.

If the plug does not fit the outlet, use a commercially available plug adapter. Do

not use electrical transformers for foreign travel as they will cause damage.

• The battery may develop a bulge.

This is a normal characteristic of the battery and does not indicate a problem.

However, if the battery bulges to the point where it will no longer fit into the

camera, please contact a Canon Customer Support Help Desk.

• If the battery is quickly depleted even after charging, it has reached the end of

its life span. Purchase a new battery.

A3300 IS

A3200 IS

A2200

Attach the cover to a charged battery so that

the o mark is visible.

COPY

The cards below can be used without restrictions on their capacities.

• SD memory cards*

• SDHC memory cards*

• SDXC memory cards*

• MultiMediaCards

• MMCplus memory cards

• HC MMCplus memory cards

* This memory card complies with the SD standards. Some cards may not operate

properly depending on the brand of card used.

Insert the included battery and a memory card (sold separately).

Check the card’s write-protect tab.

z If the memory card has a write-protect tab,

you will not be able to record images if the

tab is in the locked position. Slide the tab

up until you hear a click.

Open the cover.

z Slide the cover ( ) and open it ( ).

Insert the battery.

z Insert the battery as shown until it locks

into place with a click.

z Be sure to insert the battery in the correct

direction or it will not properly lock into

place.

Depending on your computer’s OS version, SDXC memory cards may not

be recognized even when using a commercially available card reader.

Check to make sure that your OS supports SDXC memory cards

beforehand.

Compatible Memory Cards (Sold Separately)

Inserting the Battery and Memory Card

COPY

Inserting the Battery and Memory Card

Insert the memory card.

z Insert the memory card as shown until it

locks into place with a click.

z Be sure the memory card is oriented

correctly. Inserting the memory card in the

wrong direction could damage the camera.

Close the cover.

z Close the cover ( ), and press downward

as you slide it until it clicks into place ( ).

A2200

Terminal

A3300 IS A3200 IS

Label

What if [Memory card locked] appears on the screen?

SD, SDHC and SDXC memory cards have a write-protect tab. If this tab is in the

locked position, [Memory card locked] will appear on the screen and you will not

be able to take or erase images.

COPY

Inserting the Battery and Memory Card

Removing the Battery and Memory Card

Remove the battery.

z Open the cover and press the battery lock

in the direction of the arrow.

X The battery will pop up.

Remove the memory card.

z Push the memory card in until you hear a

click, then slowly release it.

X The memory card will pop up.

Number of Shots per Memory Card

• Values are based on the default settings.

• The number of shots that can be taken will vary depending on camera settings, the

subject and the memory card used.

Memory Card

4 GB 16 GB

Number of Shots

Approx. 935

Approx. 1058

Approx. 3830

Approx. 4334

Can you check the number of shots that can be taken?

You can check the number of shots that can be taken when the camera is in a

Shooting mode (p. 24).

A3300 IS

A3200 IS

A2200

A3300 IS

A3200 IS

A2200

Number of shots that

can be taken

COPY

The Date/Time settings screen will appear the first time the camera is turned

on. Since the dates and times recorded into your images are based on these

settings, be sure to set them.

Turn on the camera.

z Press the power button.

X The Date/Time screen will appear.

Set the date and time.

z Press the qr buttons to choose an option.

z Press the op buttons to set a value.

Complete the setting.

z Press the m button.

X Once the date and time have been set, the

Date/Time screen will close.

z Pressing the power button will turn off the

camera.

Setting the Date and Time

Reappearing Date/Time screen

Set the correct date and time. If you have not set the date and time, the Date/Time

screen will appear each time you turn on the camera.

Daylight saving time settings

If you choose in Step 2 and press the op buttons to choose , you will set

the time to daylight saving (1 hour ahead).

COPY

Setting the Date and Time

Changing the Date and Time

You can change the current date and time settings.

Display the menu.

z Press the n button.

Choose [Date/Time] from the 3

tab.

z Move the zoom lever to choose the 3 tab.

z Press the op buttons to choose

[Date/Time], then press the m button.

Change the date and time.

z Follow Steps 2 and 3 on p. 19 to adjust the

setting.

z Press the n button to close the menu.

Date/Time battery

• The camera has a built-in date/time battery (backup battery) that allows the

date/time settings to be retained for about three weeks after the battery pack

has been removed.

• By inserting a charged battery or connecting an AC adapter kit (sold separately,

p. 39) the date/time battery can be charged in about 4 hours even if the camera

is not turned on.

• If the date/time battery is depleted, the Date/Time screen will appear when you

turn the camera on. Follow the steps on p. 19 to set the date and time.

COPY

You can change the language that displays on the screen.

Enter Playback mode.

z Press the 1 button.

Display the settings screen.

z Press and hold the m button, then

immediately press the n button.

Set the display language.

z Press the opqr buttons to choose a

language, then press the m button.

X Once the display language has been set,

the settings screen will close.

Setting the Display Language

What if the clock appears when the m button is pressed?

The clock will appear if too much time passes between pressing the m button

and the n button in Step 2. If the clock appears, press the m button to

remove the clock and repeat Step 2.

You can also change the display language by pressing the n button

to choose [Language] from the 3 tab.

COPY

Before you use a new memory card or one that has been formatted in other

devices, you should format the card with this camera.

Formatting (initializing) a memory card erases all data on the memory card.

As you cannot retrieve the erased data, exercise adequate caution before

formatting the memory card.

Display the menu.

z Press the n button.

Choose [Format].

z Move the zoom lever to choose the 3 tab.

z Press the op buttons to choose [Format],

then press the m button.

Choose [OK].

z Press the qr buttons to choose [OK], then

press the m button.

Format the memory card.

z Press the op buttons to choose [OK],

then press the m button.

X The memory card will be formatted.

Formatting Memory Cards

COPY

Pressing the Shutter Button

Complete formatting.

X When formatting ends, [Memory card

formatting complete] will appear on the

screen.

z Press the m button.

To take images that are in focus, be sure to first press the shutter button

lightly (halfway) to focus, then press fully to shoot.

Press halfway (Press lightly to focus).

z Press lightly until the camera beeps twice

and AF frames appear where the camera

focused.

Press fully (Press fully to shoot).

The camera plays the shutter sound and

takes the shot.

Formatting or erasing data on a memory card merely changes the file

management information on the card and does not ensure its contents are

completely erased. Be careful when transferring or disposing of a memory

card. When disposing of a memory card, take precautions such as

physically destroying the card to prevent personal information leaks.

• The total capacity of the memory card displayed in the formatting screen

may be less than indicated on the memory card.

• Perform a low-level format (p. 151) of the memory card when the camera

does not operate properly, the recording/reading speed of a memory card

has dropped, when continuous shooting speed slows down, or when

movie recording stops suddenly.

Pressing the Shutter Button

If you shoot without pressing the shutter button halfway, the image may not

be in focus.

COPY

Since the camera can determine the subject and shooting conditions, you can

let it automatically select the best settings for the scene and just shoot. The

camera can also detect and focus on faces, setting the color and brightness

to optimal levels.

Turn on the camera.

z Press the power button.

X The start-up screen will appear.

Enter A mode.

z Set the mode dial to A.

z When you point the camera toward the

subject, the camera will make a slight

noise as it determines the scene.

X The icon for the determined scene will

appear in the upper right of the screen.

X The camera will focus on detected

subjects and display frames on them.

Compose the shot.

z Moving the zoom lever toward i

(telephoto) will zoom in on your subject,

making it appear larger. Moving the lever

toward j (wide angle) will zoom out from

your subject, making it appear smaller.

(The zoom bar showing the zoom position

appears on the screen.)

Focus.

z Press the shutter button halfway to focus.

Taking Pictures (Smart Auto)

COPY

Taking Pictures (Smart Auto)

X When the camera focuses, it will beep

twice and AF frames will appear where the

camera focused.

Several AF frames will appear when the

camera focuses on more than one point.

Shoot.

z Press the shutter button fully to shoot.

X The camera will play the shutter sound and

shoot. The flash will automatically fire in

low light conditions.

X The image will appear on the screen for

approximately two seconds.

z You can take a second picture even while

an image is displayed by pressing the

shutter button again.

AF Frame

What if...

• What if the color and brightness of the images do not turn out as

expected?

The scene icon (p. 172) that appears on the screen may not match the actual

scene. If this happens, try shooting in G mode (p. 83).

• What if white and gray frames appear when you point the camera toward

a subject?

A white frame appears on the face or subject that the camera detected as the

main subject, while gray frames appear on other detected faces. The frames will

follow the subjects within a certain range (p. 92).

If the subject moves, however, the gray frames will disappear, leaving only the

white frame.

• What if a frame does not appear on the subject you want to shoot?

The subject may not be detected, and frames may appear on the background.

If this happens, try shooting in G mode (p. 83).

• What if a blue frame appears when you press the shutter button halfway?

A blue frame appears when a moving subject is detected; the focus and

exposure will continuously adjust (Servo AF).

COPY

Taking Pictures (Smart Auto)

• What if a flashing appears?

Attach the camera to a tripod so that the camera does not move and blur the

image.

• What if the camera does not play any sounds?

Pressing the l button while turning on the camera power will turn off all

sounds. To turn the sounds on, press the n button to choose [Mute] from

the 3 tab, then press the qr buttons to choose [Off].

• What if the image comes out dark even if the flash fired when shooting?

The subject is too far away for the flash to reach. The effective flash range is

approximately 30 cm – 4.0 m (12 in. – 13 ft.) at maximum wide angle (j), and

approximately 50 cm – 2.0 m (1.6 – 6.6 ft) at maximum telephoto (i).

• What if the camera beeps once when the shutter button is pressed

halfway?

Your subject may be too close. Move the following distances away from your

subject and shoot:

When at maximum wide angle (j): Approximately 3.0 cm (1.2 in.) or more.

When at maximum telephoto (i): Approximately 90 cm (3.0 ft.) or more

, and approximately 80 cm (2.6 ft.) or more .

• What if the lamp lights when the shutter button is pressed halfway?

To reduce red-eye and to assist in focusing, the lamp may light when shooting

in dark areas.

• What if the h icon blinks when you try to shoot?

The flash is charging. You can shoot when recharging ends.

What if an icon appears in the upper right of the screen?

The icon for the determined scene will appear in the upper right of the screen. For

details on the icons that appear, see “Scene Icons” (p. 172).

Choosing the subject to focus on (Tracking AF)

After pressing the o button and displaying , point the camera so that is

on the subject you want to focus on. Press and hold the shutter button halfway to

display a blue frame where focus and exposure will be maintained (Servo AF).

Press the shutter button fully to shoot.

A3300 IS

A3200 IS

A2200

COPY

You can view the images you have taken on the screen.

Enter Playback mode.

z Press the 1 button.

X The last image you took will appear.

Choose an image.

z Pressing the q button will cycle through

the images from newest to oldest.

z Pressing the r button will cycle through

the images from oldest to newest.

z The images change more quickly if you

keep the qr buttons pressed, but they will

appear coarse.

z The lens will retract after approximately 1

minute elapses.

z Pressing the 1 button again while the

lens is retracted will turn off the power.

Viewing Images

Switching to Shooting mode

Pressing the shutter button halfway, or turning the mode dial in Playback mode

switches the camera to Shooting mode.

COPY

You can choose and erase images one at a time. Please note that erased

images cannot be recovered. Exercise adequate caution before erasing an

image.

Enter Playback mode.

z Press the 1 button.

X The last image you took will appear.

Choose an image to erase.

z Press the qr buttons to display an image

to erase.

Erase the image.

z Press the p button.

X [Erase?] appears on the screen.

z Press the qr buttons to choose [Erase],

then press the m button.

X The displayed image will be erased.

z To exit instead of erasing, press the qr

buttons to choose [Cancel], then press the

m button.

Erasing Images

COPY

In Easy mode, operational instructions are displayed on the screen, and the

camera is set so that only the buttons and the zoom lever explained on this

page are functional. This prevents incorrect operation of the camera, allowing

even beginners to take worry-free pictures.

Shooting

z Set the mode dial to 9.

z Follow Steps 3 – 5 on pp. 24 – 25 to shoot

(no sound will play).

z Press the r button to turn off the flash. !

will appear on the screen. Pressing the r

button again turns on the flash and

appears on the screen. The flash will

automatically fire in low light conditions.

Viewing

z Press the 1 button, then press the qr

buttons to switch images.

z Press the 1 button, then press the m

button, and all the shots you have taken

will display for about 3 seconds each.

Press the m button again to stop the

slideshow.

z To erase images, follow the steps on p. 28.

Shooting or Viewing Images in Easy Mode

COPY

The camera can automatically select all settings so that you can shoot movies

just by pressing the shutter button.

Enter E mode.

z Set the mode dial to E.

Compose the shot.

z Moving the zoom lever toward i will

zoom in on your subject, making it appear

larger. Moving the lever toward j will

zoom out from your subject, making it

appear smaller.

Focus.

z Press the shutter button halfway to focus.

X When the camera focuses, it will beep

twice.

Shoot.

z Press the shutter button fully.

Shooting Movies

Remaining Time

COPY

+ 174 hidden pages