Canon 1827B001 User Manual
Size:
2.82 Mb
Download

Set the Machine for Network Usage

Connect the Machine to a Network

This machine has a USB connector and LAN connector. If the machine is connected to a network using a LAN cable, you can print the documents sent from a computer, send documents to a file server and send document attached to an e-mailthrough a network.

NOTE

The machine does not come with a LAN cable.

1 Connect a Category 5 or greater twisted pair LAN cable to the10Base-T/100Base-TXport on the back of the machine. Connect the other end of the cable to a network router or a hub.

PC with

 

 

PC with

 

 

 

 

 

 

 

100Base-TXConnector

10Base-TConnector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ethernet Cable

Hub

NOTE

If you use the machine as a local printer, connect the machine directly to a computer using a USB cable. (See “Installing/Uninstalling Software,” on p. 25.)

Specify the IP Address Settings

An IP address must be specified in order to enable communication between the machine and a computer.

NOTE

It is recommended that the network administrator perform the following procedures.

Before performing the following procedure, make sure that the machine is turned on and connected to a network.

This machine is set by default to automatically draw an IP address using DHCP. If your network server or router is configured to provide a DHCP address, all you need to do is connect a network cable and turn on the machine. The machine will draw an IP address automatically.

This machine also supports automatic IP addresses using BOOTP and RARP protocols. If you use these protocols, select <ON> at step 6 of the following procedures, then specify the <2. BOOTP> or <3. RARP> settings.

Specify the IP Address Manually

 

 

 

 

 

 

 

 

 

 

 

1 Press [Additional

 

2 Press [

 

] or [

] to

 

3 Press [

 

] or [

] to

 

 

 

 

 

Functions].

 

select <11. SYSTEM

 

 

select <5. NETWORK

 

 

 

SETTINGS>, then press

 

SETTINGS>, then press

 

 

 

[OK].

 

 

 

 

[OK].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

22

 

 

 

 

 

 

 

 

 

 

 

4 Press [

 

] or [

] to

 

5 Press [

 

] or [

] to

 

 

 

 

select <1. TCP/IP

 

 

select <1. IP ADDRESS

 

SETTINGS>, then press

 

AUTO.>, then press [OK].

 

[OK].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 Press [] or [] to select <OFF>, then press [OK].

7 Press [] or [] to select <2. IP ADDRESS>, then press [OK].

8 Use the numeric keys to enter the IP address, then press [OK].

Ex.

I P A D D R E S S

0 0 0 . 0 0 0 . 0 0 0 . 0 0 0

9 Press [] or [] to select <3. SUBNET MASK>, then press [OK].

10 Use the numeric keys to enter the subnet mask, then press [OK].

Ex.

S U B N E T M A S K

0 0 0 . 0 0 0 . 0 0 0 . 0 0 0

 

11 Press [

 

] or [

]

 

12 Use the numeric keys to

 

 

13 Turn off the main power

 

 

 

to select <4. GATEWAY

 

 

enter the gateway

 

 

on the left side of the

 

ADDRESS>, then press

 

 

address number, then

 

 

machine, then turn on

 

[OK].

 

 

 

 

 

press [OK].

 

 

the power to restart the

 

 

 

 

 

 

 

Ex.

 

 

machine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G A T E W A Y A D D R E S S

 

 

 

 

 

 

 

 

 

0 0 0 . 0 0 0 . 0 0 0 . 0 0 0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

If you send documents via e-mail,specify theE-MAILsettings. (See Chapter 6, “Network,” in the Reference Guide.)

23

24