Canon 1827B001 User Manual
Size:
2.82 Mb
Download

Connect the Power Cord and Turn On the Machine

1

2

Ex.

1 0 0 % L T R

T E X T / P H O T O 0 1

Main power switch

Connect the power cord into the rear socket on the

The machine enters the standby mode.

back side of the machine and the wall outlet, and

 

press the [I] side of the main power switch to ON.

 

What if...

<TONER COVER OPEN/CLOSE COVER> is displayed:

Make sure that the toner cover and scanning platform are closed properly. (See “Install Toner Cartridge,” on p. 5.)

<TONER IS NOT SET/INSERT TONER> is displayed:

Make sure that the toner cartridge is installed properly. (See “Install Toner Cartridge,” on p. 5.)

<LOAD PAPER/CASSETTE :LTR> is displayed:

Make sure that paper is loaded in the machine. (See “Set Up the Paper Cassette and Load Paper,” on p. 7.)

Connect Telephone Cables

A

B

Connect your external telephone to the external device jack (A) on back side of the machine if required.

Connect the supplied telephone cable to the telephone line jack (B) on back side of the machine and the wall jack.

NOTE

If you want to use an external telephone and receive faxes, you will need to set up the receiving mode. (See “Set the Machine for Receiving Faxes,” on p. 19.)

11

12

Set the Date and Time

● Entering Information

– Numeric keys: Enters numbers.

– [

] or [

]: Moves the

cursor position.

– [OK]: Confirms the entry.

[

]

]

Numeric

[Stop/Reset]

 

[OK]

 

Keys

 

 

[Additional

 

 

 

 

Functions]

 

 

1 Press [Additional

2 Press [

] or [

] to

3 Press [

] or [

] to

Functions].

select <8. TIMER

 

select <1. DATE&TIME

 

SETTINGS>, then press

SETTING>, then press

 

[OK].

 

 

[OK].

 

 

4 Use the numeric keys to enter the date (month/day/ year) and time (in24-hour/military time format), then press [OK].

Ex.

D A T E & T I M E S E T T I N G 1 2 / 3 1 / ´ 0 7 2 3 : 1 9

5 Press [Stop/Reset] to return to the standby mode.

NOTE

You can select the date format among three types listed below at <3. DATE TYPE SELECT>.

<MM/DD/YYYY>

<DD/MM YYYY>

<YYYY MM/DD>

By default, <6. DAYLIGHT SV.TIME> in the <8. TIMER SETTINGS> menu is set to <ON>. If you want to set <6. DAYLIGHT SV.TIME> in the <8. TIMER SETTINGS> menu to <OFF>, see Chapter 1, “Before Using the Machine,” in the Basic Operation Guide.

Set the Telephone Line Type

1 Press [Additional

2 Press [

] or [

] to

3 Press [

] or [

] to

Functions].

select <5. TX/RX

 

select <2. FAX

 

 

SETTINGS>, then press

SETTINGS>, then press

 

[OK].

 

 

[OK].

 

 

4 Press [

] or [

] to

5 Press [

] or [

] to

6 Press [

] or [

] to

select <2. USER

 

select <2. TEL LINE

 

select the telephone line

SETTINGS>, then press

TYPE>, then press [OK].

type, then press [OK].

[OK].

 

 

 

 

 

<TOUCH TONE>: Tone dialing

 

 

 

 

 

 

(default)

 

 

 

 

 

 

 

 

<ROTARY PULSE>: Pulse dialing

7 Press [Stop/Reset] to return to the standby mode.

13

14