Califone 01 0810 User Manual
Portable CD Player
Thank you for purchasing the Califone® Model
We encourage you to visit our website www.califone.com to register your product for its warranty coverage, to sign up to receive our
newsletter, download our catalog, and learn more about the complete line of Califone audio visual products, including portable and installed wireless PA systems, multimedia players and recorders, headphones and headsets, computer peripheral equipment, visual presentation products and language learning materials.
IMPORTANT SAFETY INSTRUCTIONS
Before using this product, read the instruction manual for important safety information. Please retain this manual for future reference and warranty information.
Troubleshooting & Servicing
Do not attempt to service or repair the device yourself. Refer all servicing to qualified service personnel. Do not attempt to modify the device in any way. Doing so could invalidate your warranty.
Moisture and heat sources
Do not use this apparatus near water (for example, sinks, baths, pools) or expose it to rain, moisture, dripping or splashing liquids. Do not expose the unit to high temperatures, high humidity or direct sunlight.
When cleaning the device, please use a soft, dry cloth. Never use benzene,
Place the device in stable location, so it will not fall causing damage to the device or bodily harm.
The product may only be used with the original parts intended for it. The product may only be used in closed and dry rooms. The intended use includes adherence to the specified installation instructions. The manufacturer accepts no liability for damage arising due to improper use.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The CD circuitry may cause interference to nearby radios. To prevent interference, either switch the CD player off or move away from the affected radio.
NOTE: This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio / TV technician for help.
This Compact Disc Player is made and tested to meet safety standards of the FCC, requirements and compliance with safety performance of the U.S. Department of Health and Human Services, and also with FDA Radiation Performance Standards 21 CFR Subchapter J.
INVISIBLE LASER RADIATION W HEN OPEN A ND INTERLOCK F AILED OR DEFE ATED. A VOID D I- RECT EXPOSURE T O LASER BEAM .
Thisunitemploysanoptical laserbeamsystem intheCD mechanism, designed with
THIS IS A
The following materials are included.
• Power Adapter
• 2 Alkaline AA batteries
• 3060AV Headphone
• User Manual
Unpacking the Unit
Inspect the unit once the packaging has been opened for any damage occurred during shipping & contact us immediately. Please keep the packing material for further use.
CD Skip Backward Button
CD Door Open Switch
Bass Boost Switch
CD Stop Button (Power Off )
CD Play/Pause Button (Power On)
DC Input Jack
CD Skip Forward Button
SETUP AND INSTALLATION
1.Open the battery compartment cover and insert two “AA” alkaline batteries inside the battery compartment. Follow the polarity as indicated in the battery compartment.
2.Close the battery compartment cover.
•Do not attempt to recharge,
•During store when batteries will not be used for an extended period of time. Be sure to remove them to avoid possible damage caused by battery leakage and corrosion.
•Do not mix alkaline, standard
•Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow the battery manufacturer’s directions).
•Dispose of old batteries properly in accordance with local laws.
When the battery indicator appears in the LCD panel, this means that the batteries are losing their charge. In this case the CD player will not function properly and the batteries must be replaced.
1.Insert the DC plug, at the end of the AC adapter cord into the DC input jack.
2.Plug the AC adapter into AC power outlet socket. Use only with the 6V AC adapter and make sure the local voltage corresponds on the adapter’s required AC input voltage.
Note: If the AC plug of this unit does not fit in your AC outlet, a plug adapter (not supplied) should be used. Consult your local dealer on the type of plug adapter required.
1.Decrease the volume to minimum.
2.Connect the earphones to the PHONES (GREEN) jack.
3.Increase the volume to the desired listening level.
Caution: Avoid excessive volume for long periods of time as this can result in hearing damage.
HANDLING COMPACT DISCS
This unit is designed to play only compact discs bearing the following identification logo.
Other discs may not conform to the CD standard and may not play properly.
•Dirty, scratched or warped discs
may cause skipping or noise.
PRESS THE CLAWS
ATTHE CENTER OF
• Handle the disc only by the edges.
THE DISC CASE.
To keep clean, do not touch its
LIFT OUT WITHOUT
• Discs should be stored in their
TO INSERT IT.
cases after use to avoid serious
• Do not expose disc to direct
sunlight, high humidity, high
temperature, dust, etc.
Prolonged exposure to extreme
temperatures can warp the disc.
• Do not stick or write anything on
FROM THE CENTER TO THE EDGE
either side of disc. Sharp writing
instruments or the inks
used in some felttip pens may
damage its surface
Remove the disc
•To pick up the disc, hold the edge and gently press the center pivot as illustrated.
Wait for the disc to stop rotating before pressing the OPEN button.
Note: This unit can play 3” (8cm) single CDs without an adapter. Do not use a CD single adapter for these discs.
Finger prints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a soft cloth should remove most particles. Wipe in a straight motion from the center to the edge.
Never use thinner, benzine, record cleaner or
CLEANING THE CABINET
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean.
CLEANING THE LENS
A dirty lens will cause sound skipping and if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as below:
•Dust or Dry Particles
Using a camera lens brush/blower, blow on the lens several times and wipe it lightly with the brush to remove dust. Blow on the lens one more time.
If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab starting from the middle and working to the outside edge.
BASIC DISC PLAY
DO not try to play a
1.Connect the earphones to the PHONES (GREEN) socket.
2.Press the OPEN button to open the CD compartment lid.
3.Adjust the VOLUME to minimum.
4.Insert the disc with the label side facing up.
5.Close the lid securely until a click is heard.
6.Press the PLAY button to start playing.
To Emphasize the bass sound
Set the BASS BOOST switch to the ON position. Note: The bass boost performance will depend on the VOLUME control setting.
This switch prevents accidental selection of an unwanted function during Playback or Stop mode. In the HOLD “ON” position, no function button on the unit can be operated (except OPEN). Moving the switch to the “OFF” position will allow the unit to return to normal operation.
Turning Power on and off
This unit has no ON/OFF switch. To turn on and off, press the following buttons.
To turn on: Press >II PLAY/PAUSE (playback starts).
To turn off: Press STOP button once for standby mode. PressSTOP button twice to turn off the power.
When the unit is stopped (standby mode) for approximately 30 seconds, the power will automatically turn off.
LCD DISPLAY INFORMATION
WHEN POWER IS ON
If a disc is in, auto adjustment starts. During adjustment, display shows -
•If no disc is in, disc is displayed. Put the disc in and close the lid. Auto adjustment starts.
•If the lid is open, display shows OPEN. Closing the lid starts auto adjustment.
•If unable to read TOC then Er is displayed. Note: TOC means Table Of Contents.
•When TOC data has been read, display shows TOC for 1 second.
•To turn on
TO PLAY FROM STOP CONDITION
•Press the PLAY/PAUSE button. The display changes to 01 00:00 and starts play.
•When the memory is full, stops flashing.
Press the STOP button. This will stop play and the TOC will be displayed.
Press the PLAY/PAUSE button and the pause on/off button alternately. When the unit is paused, the time display will flash.
Every time the MODE button is pressed, the corresponding mode appears in the display window.
Shown on the LCD display. The current track on the disc will be repeated.
Shown on the LCD display. All tracks on the disc will be repeated.
NOTE: In normal mode, none of the above mode symbols will be shown in the display.
During normal playback a indicator appears on the display when the batteries need to be changed.
1. Press the MODE button three times; INTRO will display.
2. Press the PLAY/PAUSE button, starts INTRO play from track no.01.
3. Select INTRO mode during play;INTRO starts flashing.
• Press the PLAY/PAUSE button. Flashing will stop and INTRO play will start from track no. 01.
•Press >>I to play the current track. Flashing
will stop, and INTRO play will start from next track.
• Press I<<. Flashing will stop andINTRO play will start from current track.
This allows selected tracks on the disc to be played in any desired order.
To set the program play
•Programming can be set in the STOP mode or normal play mode.
1. Press the PROG button; PROGRAM will start flashing.
2. Press I<< or>>I to select the desired track. 3. When the desired track is displayed, press the PROG button to register. The track No.
display changes to 00 again.
4. Repeat steps 2 and 3 to program the order of more tracks. Up to 20 tracks can be programmed into memory.
To complete programming and start playback
Press the PLAY/PAUSE button. PROGRAM will stop flashing and playback will begin.
To clear programming
•Register 00 on the first program track.
•Open the door.
Enables all the tracks on a disc to be played in a
1. Press the MODE button four times; RANDOM will display.
2. Press the PLAY/PAUSE button. The Track No. is selected at random and will begin to play.
3. To select RANDOM mode during play,
RANDOM starts flashing.
• Press the PLAY/PAUSE button I<< or>>I. Flashing will stop and RANDOM play will begin.
Locating a Particular track
To go back to the beginning of the
Press I<< lightly and repeatedly.
current or a previous track
To go to beginning of the following
Press >>I lightly and repeatedly.
Locating a Particular Point in a track
To search backward at high speed
Keep I<< depressed.
To search forward at high speed
Keep >>I depressed.
Low level audio will be heard during the search process to assist in locating the correct point in the track.
When activated the
When the laser loses tracking due to mechanical shock, the CD reading will be interrupted, but the audio playback will remain stead due to the memory buffer.
If the unit is subject to excessive and continuous repeated shocks, it will cause the sound to skip.
•When the digital
•Remember that conditions such as dirty, scratched or warped discs may cause skipping or noise, thereby affecting performance of the
•Skip protection greatly reduces or eliminates skipping during activity such as walking/running/driving. During such use, it’s best to hold the compact disc player with the OPEN switch facing upward.
Laser diode Material:
DAC with four times oversampling
Wow and flutter:
Below measurable limits
No. of Channels:
2 Channels (Stereo)
Output level Phones:
Bass boost effect:
(100Hz) + 6 dB
2 “AA” alkaline batteries OR 6VDC 300 mA power adapter
Power adapter plug type:
EIAJ, center hole φ 1.7mm, outside φ 4.0mm
0.8W (DC 3V) under normal conditions
144 x 140 x 27 mm
200g not including battery
Califone warrants this product to be free from defective material and workmanship for one year from the purchase date. Our “Project Intercept” Customer Satisfaction program will replace defective parts and repair malfunctioning equipment under this warranty when the defect occurs under normal use.
All Damage Claims Must Be Made With the Freight Carrier
Notify the freight carrier immediately if you observe any damage to the shipping carton or product. Repack the unit in the carton and await inspection by the carrier’s claim agent. Notify your dealer of the pending freight claim.
Returning Your Unit for Service or Repairs
Should your unit require service, contact our Customer Service Department online at califone.com/techsupport or via email firstname.lastname@example.org or by phone at
Authorization) number before returning it to Califone. The unit must be returned to our factory via prepaid transportation only after the factory issues an RA number, which must be clearly written on the outside of the box.
Califone® International, Inc.
1145 Arroyo Avenue, #A
San Fernando, CA 91340 USA
Toll Free 800.722.0500 | Toll Free Fax 877.402.2248 International Customers call 818.407.2400 or Fax 818.407.2405 califone.com