Cabletron Systems 9A426-01 User Manual
Size:
270.78 Kb
Download

9A426-01/9A426-02Module Specific Information

SVC Signalling Screen

The 9A426-01/9A426-02 SVC Signalling Screen (Figure 6), is used to change the type of SVC signalling and LAN Emulation used by the module.

 

SmartSwitch 9000 Local Management

 

 

9A426-02SVC Signalling

 

Module Name:

9A426-02

Firmware Revision: 01.00.01

Slot Number:

5

BOOTPROM Revision: 01.01.01

Signalling/LAN Emulation Type:

[UNI3.0/LANE1.0]

 

 

ILMI:

[ON]

 

 

LEC ATM Address:

0000000000000000000000000000000000000000

SAVE PORT #:

1

EXIT

RETURN

Figure 6. 9A426-01/9A426-02SVC Signalling Screen

18

9A426-01/9A426-02Module Specific Information

SVC Signalling Screen Fields

The following information briefly explains each SVC Signalling Screen field.

Signalling/LAN Emulation Type (Toggle)

Displays the types of signalling and LAN Emulation to be used by the module. Use the Space Bar to select one of the following choices:

UNI3.1/LANE1.0

UNI3.0/LANE1.0

ILMI (Toggle)

Enables or disables the Interim Local Management Interface (ILMI) used in UNI signalling. If you disable ILMI, you must enter the LEC ATM Address. Use the Space Bar to select one of the following:

ILMI ON (default)

ILMI OFF

!After you toggle this field, the module reboots automatically.

CAUTION

LEC ATM Address (Modifiable, if ILMI is OFF)

Displays the ATM address of this LEC.

NOTE

If you disable ILMI (ILMI is OFF), you must manually enter the address of the LEC in this field.

PORT #: (Toggle)

Selects a specific ATM port.

To select another port (if applicable), use the arrow keys to highlight the PORT #: field (bottom left corner of the screen), then press theSpace Bar.

19