Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Boot Load Commands

chpi

Use chpi to set one of the two boot load software images as the default. Unless otherwise specified within the initial reboot countdown, the default boot load software image is the image that is loaded into DRAM and executed.

Parameter

Explanation

 

 

0

Set boot load software image stored in area 0 of the boot

 

PROM as the default image.

1

Set boot load software image stored in area 1 of the boot

 

PROM as the default image.

Example

Set the boot load software image in boot PROM location 1 as the default image.

=>chpi 1

Modifying Default value for Boot Load Software,

please wait...

New default Boot Load Software value programmed

successfully.

New Default Boot Load Software value: 1

=>

SmartCell 6A000/ZX-250Reference Manual3-3