Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Console Commands

UNIRoute

Use UNIRoute (user-networkinterface route) to manage UNI routes and UNI routing tables. The routes are static using this command, compared to the dynamic UNI routes created through ILMI registration.

SERVER SVC

X X

Operators

add, delete, show, flush

Parameters

Input Parameter

Description

Value/Field Size

Default

 

 

 

 

[PortNumber]

Port number on the switch.

ALL, A1...A4, B1...B3,

ALL

 

 

C1...C4, D1...D4

 

[UNIATMAddress]

ATM address for the UNI route.

13-20bytehex-based/

NONE

 

 

Up to 59 characters

 

Descriptions

Operator

Parameters/Permissions

Description

 

 

 

add [PortNumber] <portnumber>uniroute [UNIATMAddress]

<uniatmaddress>

Administrator

Creates a UNI route. More than one UNI ATM address can be assigned per port. When adding a UNI ATM address to a port, the switch provides a default value for the net prefix. You can accept the default, or you can list the net prefixes (see show netprefix) and construct a valid ATM address by using one of the net prefixes displayed.

delete [PortNumber] <portnumber> uniroute[UNIATMAddress]

<uniatmaddress>

Administrator

Removes a UNI ATM address from the specified port. Only static routes (routes added with the console) are removed. To remove all routes, use flush uniroute.

SmartCell 6A000/ZX-250Reference Manual2-201

Console Commands

Operator

Parameters/Permissions

Description

 

 

 

show [PortNumber] <portnumber>uniroute [UNIATMAddress]

<uniatmaddress>

All

Displays the UNI ATM addresses for the specified port and specifies whether they are static or dynamic.

flush [PortNumber] <portnumber> uniroute[UNIATMAddress]

<uniatmaddress>

Administrator

Flushes all (static and dynamic) UNI routes (ATM addresses) for the specified port. To flush all UNI routes for all ports, enter all at the port number prompt. Entershow uniroute before this command to display information you will need as input. Enter it again to confirm that the flush was successful.

Examples

switch_prompt # add uniroute

PortNumber(A1) : a3

UNIATMAddress():39:00:00:00:00:00:00:11:22:33:44:55:66:11:22:33:44:55:66:01

switch_prompt # add uniroute

PortNumber(A1) : a3

UNIATMAddress():39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:02

switch_prompt # add uniroute

PortNumber(A1) : a3

UNIATMAddress():39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:03switch_prompt #

switch_prompt #

delete uniroute

PortNumber(A1)

: a3

UNIATMAddress()

:39:00:00:00:00:00:00:00:99:00:11:22:33:11:22:33:04:05:06:02

Deleting Static

Route.

Confirm(y/n)?: y

 

switch_prompt #

 

switch_prompt #

show uniroute

PortNumber(ALL)

:a3

Port#

RouteType

Atm Address

===========================================================================

A3

STATIC

39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:01

A3

STATIC

39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:03

switch_prompt #

2-202SmartCell6A000/ZX-250Reference Manual

Console Commands

The following example shows the uniroute listing, before and after all ports are flushed:

switch_prompt # show uniroute

PortNumber(ALL):

 

Port#

RouteType

Atm Address

===========================================================================

A1

STATIC

39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:44:55:66:01

A3

STATIC

39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:01

A3

STATIC

39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:03

switch_prompt #

flush uniroute

 

PortNumber(A1)

 

: a1

Confirm(y/n)?: y

 

 

switch_prompt #

 

 

switch_prompt #

show uniroute

 

PortNumber(ALL)

 

:

Port#

RouteType

Atm Address

===========================================================================

switch_prompt #

SmartCell 6A000/ZX-250Reference Manual2-203