Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Console Commands

SVC

Use SVC (switched virtual circuit) to see the SVCs created on the switch.

SERVER SVC

X X

Operator

show

Parameters

Input Parameter

Description

Value/Field Size

Default

 

 

 

 

[PortNumber]

Port number on the switch.

ALL, A1...A4,

ALL

 

 

B1...B3, C1...C4,

 

 

 

D1...D4

 

[CrossConnId]

Chronological sequential index marker of the

1,2,3,4.../

 

 

circuits. All point-to-multipoint(PMP)

n/a

 

 

cross-connectIDs of the same low port have the

 

 

 

same cross-connectID.

 

 

In the Output Parameter table below, (</d>) appears next to parameters that are available only through theshow svc /d (detailed) command. When (</s>) (summarized) appears next to a parameter, it means that this parameter is displayed in both the summarized and the detailed tables.

Output Parameter

Description

Value/Field Size

 

 

 

[ConnId] (</s>)

Same as [CrossConnId] input parameter

1,2,3,4.../

 

 

n/a

[Conn SubId] (</s>)

Id of the leaf in PMP connection. If you do not specify a sub

1,2,3,4.../

 

ID, all leaves of a PMP connection identified by the

n/a

 

cross-connectID will be deleted.

 

[Traffic Type] (</s>)

Traffic type of the descriptor.

CBR, NRTVBR,

 

 

RTVBR, UBR

SmartCell 6A000/ZX-250Reference Manual2-177

Console Commands

Output Parameter

Description

Value/Field Size

 

 

 

[ConnType] (</s>)

[LowPort] (</s>) [LowVPI] (</s>) [LowVCI] (</s>) [HighPort] (</s>) [HighVPI] (</s>) [HighVCI] (</s>)

Either PMP to PTP connection type.

PMP, PTP

These parameters are available in the show svc /s option, as

See Input Parameter

well as those listed above. See Input Parameter table above

table

for descriptions.

 

[AdminStatus] (</s>)

Status of the VC. It can be modified by the Administrator.

UP, DOWN

[L2HOpStatus] (</d>)

Status of the forward connection. Status is from the

UP, DOWN

 

low-to-highVCL (virtual channel link), the connection

 

 

between host and switch.

 

[H2LOpStatus] (</d>)

[L2HLastChange(Time in 1/100 second since last reboot)] (</d>)

Status of the backward connections. Status is from the

UP, DOWN

high-to-lowVCL, the connection between host at switch.

 

Time stamp of the last change in operation status of the

1/100 second

forward traffic connection.

 

[H2LLastChange)(Time in 1/100 second since last reboot)] (</d>)

Time stamp of the last changed in operation status of the

1/100 second

backward connections.

 

[FwdTrafficType] (</d>)

Traffic type of this forward cross-connect.

CBR, NRTVBR,

 

 

RTVBR, UBR

[FwdBandwidthAllocated

Forward bandwidth allocated to this cross-connect,as

Kb/s/

in Kb/s] (</d>)

calculated by CAC.

0-622000

[FwdPriorityQueue]

Forward priority of the internal queue of this cross-connect,

HIGH,

(</d>)

as calculated by CAC.

MEDIUM-HIGH,

 

 

MEDIUM-LOW,LOW

[FwdEarlyPacketDiscard

Forward EPD of this cross-connect,as calculated by CAC

Enabled, Disabled

(for Lower...)] (</d>)

for the low threshold of congestion.

 

[FwdEarlyPacketDiscard

Forward EPD of this cross-connect,as calculated by CAC

Enabled, Disabled

(for Higher...)] (</d>)

for the high threshold of congestion.

 

2-178SmartCell6A000/ZX-250Reference Manual

Console Commands

Output Parameter

Description

Value/Field Size

 

 

 

[FwdRMCellPriority]

Forward RM (resource management) cell priority for this

Enabled, Disabled

(</d>)

cross-connect,as calculated by CAC.

 

Fwd Cell Loss Priority

Forward bandwidth allocated to this cross-connect,as

Enabled, Disabled

(CLP)] (</d>)

calculated by CAC.

 

[Number of Cells received

Number of cells received the forward direction of this

0,1,2,3,4.../

in the Fwd Direction]

cross-connect.

n/a

(</d>)

 

 

[Number of Cells dropped

Number of cells dropped in the forward direction of this

0,1,2,3,4.../

in the Fwd Direction]

cross-connect.

n/a

(</d>)

 

 

[Number of EPD Packets

Number of EPD packetsdropped in the forward direction of

0,1,2,3,4.../

dropped in the Fwd

this cross-connect.

n/a

Direction] (</d>)

 

 

[Backward Traffic Type]

Traffic type of this backward cross-connect.

CBR, NRTVBR,

(</d>)

 

RTVBR, UBR

[Backward Bandwidth

Backward bandwidth allocated to this cross-connect,as

Kb/s/

Allocated in KB/s] (</d>)

calculated by CAC.

0-622000

[Backward Priority Queue]

Backward priority of the internal queue of this

HIGH,

(</d>)

cross-connect,as calculated by CAC.

MEDIUM-HIGH,

 

 

MEDIUM-LOW,LOW

[Bkwd Early Packet

Backward EPDof this cross-connect,as calculated by CAC

Enabled, Disabled

Discard (For Lower...)]

for the low threshold of congestion.

 

(</d>)

 

 

[Bkwd Early Packet

Backward EPDof this cross-connect,as calculated by CAC

Enabled, Disabled

Discard (For Higher...)]

for the high threshold of congestion.

 

(</d>)

 

 

[Backward RM Cell

Backward RM cell priority for this cross-connect,as

Enabled, Disabled

Priority] (</d>)

calculated by CAC.

 

[Backward Cell Loss

Backward CLP for this cross-connect,as calculated by

Enabled, Disabled

Priority (CLP)] (</d>)

CAC.

 

SmartCell 6A000/ZX-250Reference Manual2-179