Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Console Commands

Table 2-1Filter Flags (Continued)

MESSAGES PRINTED

VALUE

 

 

Notice messages only

32

Information messages only

64

Debug messages only

128

Trace messages only

256

Alarm messages only

512

Descriptions

Operator

Parameters/Permissions

Description

 

 

 

modify [Filter Parm Pos]logtrace <filterparamposition>

[Filter Search Str] <filtersrchstring> [Filter Debug Lvl] <filterdebuglevel> [Input File Flags] <inputfilterflags> [Print Debug Msg] <printdebugmessage> [NLS mode]<n/a> [Output Destination] <outputdestination> [Print Parms flags] <printparamflags>

[Quiet mode] <quietmode> [StartRecordNum] <startrecordnumber> [Timestamp] <time>

Modifies logging and tracing configuration parameters by logging, filtering and forwarding logging and tracing messages to the log trace buffer. See the Software Modules Table on page 2-110and Software SubModules Table on page2-111for further details.

Administrator

2-114SmartCell6A000/ZX-250Reference Manual

Console Commands

Operator

Parameters/Permissions

Description

 

 

 

show All logtrace

Displays the parameters of the currently configured log trace. Logged messages can also generate alarms, depending on how the log alarm mask is configured.

Setting the log trace opens a TCP port through which other log trace clients can connect and receive messages. Filtering the messages can be done either on the switch or from the external log trace clients. Filtering through external log trace clients can be done using module, submodule, message, parameter type, parameter values, or flags. See the Software Modules Table on page 2-110and Software SubModules Table on page2-111for further details.

SmartCell 6A000/ZX-250Reference Manual2-115