Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Console Commands

Log

Use Log to control log message recording onto the log message buffer.

SERVER SVC

X

Operators

start, stop

Parameters

This command has no parameters. Just type start log orstop log at the switch prompt.

Descriptions

Operator

Parameters/Permissions

Description

 

 

 

start log

Administrator

Enables messages to be logged into the log message

 

 

buffer.After entering this command, messages begin logging

 

 

to the buffer, which could lead to alarms being generated,

 

 

depending on which flags were set with modify

 

 

logalarmmask (see “LogAlarmMask”).You can also print

 

 

messages directly to the console instead of the log.

stop log

Administrator

Disables message logging into the buffer. After entering this

 

 

command, no alarms are generated from log messages.

 

 

Logging can be enabled again by entering start log.

Examples

switch_prompt # start log

Enabling logging into buffer at time:165:41:09:486 switch_prompt #

switch_prompt # stop log

Disabling logging into buffer at time:166:01:55:332 switch_prompt #

SmartCell 6A000/ZX-250Reference Manual2-103