Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Console Commands

LECSTLVSet

Use LECSTLVSet (LAN emulation configuration server type, length, and value set) to manipulate TLV parameters on the LECS. A TLV set is a collection of TLV parameters associated with an ELAN (emulated LAN).

SERVER SVC

X

Operators

add, delete, modify, show

Parameters

Parameter

Description

Value/Field Size

Default

 

 

 

 

[TLVSetNumber]

Number that identifies the set of TLV

1-32767

1

 

parameters on the LECS.

 

 

[ControlTimeout]

Time-outperiod used for timing out most

seconds/10-300

n/a

 

request/response control-frame

 

 

 

interactions.

 

 

[MaxUnknownFrameCount]

Total counter frames a LANE client will

1-10

n/a

 

send to the LECS for a given unicast LAN

 

 

 

destination.

 

 

[MaxUnknownFrameTime]

Total time frames a LANE client will send

seconds/1-160

n/a

 

the LECS for a given unicast LAN

 

 

 

destination.

 

 

[VCCTimeout]

Time-outperiod for releasing a data direct

seconds/0-65535

n/a

 

VCC on an LEC if it has not been used to

 

 

 

transmit or receive any data.

 

 

[MaxRetryCount]

Maximum number of times a LEC should

0-2

n/a

 

try for a given LAN destination.

 

 

[ArpAgingTime]

Maximum time that a LEC maintains an

seconds/10-300

n/a

 

entry in its cache in the absence of updates.

 

 

[ForwardDelay]

Maximum time a LEC will maintain an

seconds/4--30

n/a

 

entry for a non-localMAC address in its

 

 

 

cache in the absence of updates.

 

 

SmartCell 6A000/ZX-250Reference Manual2-83

Console Commands

Parameter

Description

Value/Field Size

Default

 

 

 

 

[ArpResponseTime]

Maximum time that the LEC expects a

seconds/1-30

n/a

 

request/response cycle to take.

 

 

[FlushTimeout]

Time limit on flush response after flush

seconds/1-4

n/a

 

request has been sent, before taking

 

 

 

recovery action.

 

 

[PathSwitchingDelay]

Time since sending a frame to the LECS

seconds/1-8

n/a

 

after which the LANE client may assume

 

 

 

that the frame has been either discarded or

 

 

 

delivered to the recipient.

 

 

[LocalSegId]

Segment ID of the ELAN.

seconds/0-4095

n/a

[MulticastSendVCCType]

Signaling parameter used by the LEC when

0-2

n/a

 

establishing multicast send VCC.

 

 

[MulticastSendVCCAvgRate]

Signaling parameter used by the LEC when

cells p/second/

n/a

 

establishing multicast send VCC.

0-370370

 

[MulticastSendVCCPeakRate]

Signaling parameter used by the LEC when

cells p/second/

n/a

 

establishing multicast send VCC.

0-370370

 

[ConnectionCompeteTime]

Time period in which data or a message is

seconds/

n/a

 

expected from a calling party when

1-10

 

 

establishing a connection.

 

 

2-84SmartCell6A000/ZX-250Reference Manual

Console Commands

Descriptions

Operator

Parameters/Permissions

Description

 

 

 

add

lecstlvset

delete lecstlvset

modify lecstlvset

[TLVSetNumber] <tlvsetnumber> [ControlTimeout] <controltimeout> [MaxUnknownFrameCount] <maxunknframecount> [MaxUnknownFrameTime] <maxunknframetime> [VCCTimeout] <vcctimeout>

[MaxRetryCount] <maxretrycount> [ArpAgingTime] <arpagingtime> [ForwardDelay] <forwarddelay> [ArpResponseTime] <arpresponsetime> [FlushTimeout] <flushtimeout> [PathSwitchingDelay] <pathswitchingdelay> [LocalSegId] <localsegid> [MulticastSendVCCType]<m/castsendvcctype>

[MulticastSendVCCAvgRate] <m/sendvccavgrate> [MulticastSendVCCPeakRate]

<m/castsendvccpeakrate>

[ConnectionCompeteTime]

<connectioncompetetime>

Administrator

[TLVSetNumber] <tlvsetnumber>

Administrator

[TLVSetNumber] <tlvsetnumber> [ControlTimeout] <controltimeout> [MaxUnknownFrameCount]<maxunknframecount> [MaxUnknownFrameTime]<maxunknframetime> [VCCTimeout] <vcctimeout> [MaxRetryCount] <maxretrycount> [ArpAgingTime] <arpagingtime> [ForwardDelay] <forwarddelay> [ArpResponseTime] <arpresponsetime> [FlushTimeout] <flushtimeout> [PathSwitchingDelay] <pathswitchingdelay> [LocalSegId] <localsegid>

[MulticastSendVCCType] <m/castsendvcctype> [MulticastSendVCCAvgRate] <m/castsendvccavgrate> [MulticastSendVCCPeakRate] <m/castsendvccpeakrate> [ConnectionCompeteTime] <connectioncompetetime>

Creates a TLV set on the LECS.

Removes a TLV set from the LECS.

Changes an existing TLV set on the LECS.

Administrator

show [TLVSetNumber] <tlvsetnumber>

lecstlvset

All

Displays either all or a specified TLV set on the LECS.

SmartCell 6A000/ZX-250Reference Manual2-85

Console Commands

Examples

switch_prompt # add lecstlvset

 

TLVSetNumber[1-32767](1)

: 3

ControlTimeout[10-300]()

: 200

MaxUnknownFrameCount[1-10]()

: 5

MaxUnknownFrameTime[1-60]()

: 50

VCCTimeout[0-65535]()

: 50000

MaxRetryCount[0-2]()

: 1

ArpAgingTime[10-300]()

: 250

ForwardDelay[4-30]()

: 27

ArpResponseTime[1-30]()

: 27

FlushTimeout[1-4]()

: 2

PathSwitchingDelay[1-8]()

: 2

LocalSegId[0-4095]()

: 2000

MulticastSendVCCType[0-2]()

: 1

MulticastSendVCCAvgRate[0-370370]()

:

MulticastSendVCCPeakRate[0-370370]()

:

ConnectionCompeteTime[1-10]()

: 8

switch_prompt #

 

switch_prompt # delete lecstlvset

 

TlvsetNumber(1): 2

 

TlvIndex TlvDescription

Value

===========================================================================

TLVSet 2 :

 

 

 

1

Control Timeout

 

200

3

Max Unknown Frame Time

2

6

Arp Aging Time

 

250

7

Forward Delay

 

30

Confirm(y/n)?:y

 

 

 

switch_prompt #

 

 

 

switch_prompt # modify lecstlvset

 

 

TLVSetNumber[1-32767](1)

: 3

 

ControlTimeout[10-300](200)

: 250

 

MaxUnknownFrameCount[1-10](5)

: 4

 

MaxUnknownFrameTime[1-60](50)

: 40

 

VCCTimeout[0-65535](50000)

: 40000

 

MaxRetryCount[0-2](1)

 

: 2

 

ArpAgingTime[10-300](250)

: 200

 

ForwardDelay[4-30](27)

 

: 20

 

ArpResponseTime[1-30](27)

: 20

 

FlushTimeout[1-4](2)

 

: 3

 

PathSwitchingDelay[1-8](2)

: 5

 

LocalSegId[0-4095](2000)

: 2500

 

MulticastSendVCCType[0-2](1)

: 2

 

MulticastSendVCCAvgRate[0-370370]()

:

 

MulticastSendVCCPeakRate[0-370370]()

:

 

ConnectionCompeteTime[1-10](8)

: 6

 

switch_prompt #

 

 

 

switch_prompt # show lecstlvset

TlvsetNumber(ALL) : 3

TlvIndex TlvDescription Value

===========================================================================

TLVSet 3 :

1

Control Timeout

250

2

Max Unknown Frame Count

4

2-86SmartCell6A000/ZX-250Reference Manual

Console Commands

 

 

3

Max Unknown Frame Time

40

4

VCC Timeout

40000

5

Max Retry Count

2

6

Arp Aging Time

200

7

Forward Delay

20

8

ARP Response Time

20

9

Flush Timeout

3

10

Path Switching Delay

5

11

Local Seg Id

2500

12

Multicast Send VCC Type

2

15

Connection Complete Time

6

switch_prompt #

 

 

SmartCell 6A000/ZX-250Reference Manual2-87