Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Console Commands

LANEClient

Use LANEClient (local area network emulation client) to allow inband management of LANE clients on the switch.

SERVER SVC

X X

Operators

add, modify, (show client)

Parameters

Input Parameter

Description

Value/Field Size

Default

 

 

 

 

[ClientNumber]

Number of the client.

0-127

ALL

[LanName]

Name of the ELAN for this client to join.

Up to 32 characters

ELAN000

[ServerType]

Type of LANE server.

LECS, LES

LECS

[ServerAddress]

ATM Address of the LANE server or

13-20bytehex-based/

Registered LECS

 

LECS. If at a local server, enter the switch

Up to 59 characters

address

 

ATM address.

 

 

[IPAddress]

IP address of the client.

dot decimal/

NONE

 

 

7-15characters

 

[NetMask]

IP netmask of the client. Defaults to the

dot decimal/

255.0.0.0,

 

appropriate netmask, based on the class of

7-15characters

255.255.0.0, or

 

the IP address. Calculated from the first

 

255.255.255.0.

 

two high bits of the IP address, so it is either

 

 

 

255.0.0.0, 255.255.0.0, or 255.255.255.0.

 

 

 

Must be specified only if IP subnets are

 

 

 

being used.

 

 

[MTU]

Maximum transfer unit for this client.

1516, 9234, NONE

1516

2-66SmartCell6A000/ZX-250Reference Manual

Console Commands

Description

Operator

Parameters/Permissions

Description

 

 

 

add [ClientNumber] <clientnumber> laneclient[LanName] <lanname>

[ServerType] <servertype>

[ServerAddress]

<serveraddress>

[IPAddress] <ipaddress>

[NetMask] <netmask>

[MTU] <maxtransferunit>

Administrator

modify [ClientNumber] <clientnumber> laneclient[LanName] <lanname>

[ServerType] <servertype>

[ServerAddress]

<serveraddress>

[IPAddress] <ipaddress>

[NetMask] <netmask>

[MTU] <maxtransferunit>

Administrator

show client [ClientNumber] <clientnumber>

All

Creates a new LANE (LAN emulation) client to the switch. Add a LANE client if you want to access the switch command console using LANE.

Changes an existing LANE client on the switch.

Displays all or specified clients on the switch. Enter show client to establish the different client types on the switch. See “Client” for further details.

Examples

switch_prompt # add laneclient

ClientNumber(0) :100

LanName(ELAN100):

ServerType(LECS):

ServerAddress() :39:00:00:00:00:00:11:11:11:11:11:11:11:00:11:22:22:44:55:01

IPAddress() :101.1.1.100

NetMask(255.0.0.0): MTU(1516) : switch_prompt #

switch_prompt # modify laneclient

ClientNumber(0) : 100

LanName(ELAN100): New100

ServerType(LECS):

ServerAddress() :39:00:00:00:00:00:11:11:11:11:11:11:11:00:11:22:22:44:55:01

IPAddress(101.1.1.100):

NetMask(255.0.0.0): MTU(1516) : switch_prompt #

SmartCell 6A000/ZX-250Reference Manual2-67