Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Console Commands

Firmware

Use Firmware to re-programthe switch application software when you want to perform a switch upgrade.

SERVER SVC

X X

Operator

update

Parameters

Input Parameter

Description

Value/Field Size

Default

 

 

 

 

[ServerIP]

IP address of server with the updated image

dot decimal/

Last IP address

 

files.

7-15characters

 

[Path]

Full pathname from server (directory) to image

n/a

last path used

 

files.

 

 

Description

Operator Parameters/Permissions Description

update

[Server IP] <serverip>

firmware

[Path] <path>

 

Administrator

Updates the switch software (for example, when upgrading your switch). You must know the full pathname of these updated image files. The switch uses the TFTP protocol, so it needs to be implemented on your server to complete this command. You must then reboot your switch (see “Reboot”) for the new firmware to take effect. Reboot will not affect your previous network configuration.

2-46SmartCell6A000/ZX-250Reference Manual

Console Commands

Example

SmartCell ZX # update firmware

ServerIP()

:204.95.77.240

Path() :server/server.ima

 

You are updating the code image in the flash.

Are you sure this is what you want to do?

Confirm(y/n)?:y

Verifying bootfile server/server.ima on 204.95.77.240...passed. Erasing Flash.

Using TFTP to get and program bootfile server/server.ima from 204.95.77.240. 2787K (2854508 bytes) received.

Flash update succeeded.

You will have to reboot for the new image to take effect. SmartCell ZX #

SmartCell 6A000/ZX-250Reference Manual2-47